A type III porous-thermo-elastic problem with quasi-static microvoids

Meccanica - In this work we study, from the numerical point of view, a one-dimensional thermoelastic problem where the thermal law is of type III. Quasi-static microvoids are also assumed within...     

Dinuclear Cobalt(III) Complexes Showing a Co2O2 Metallacycle

The heptadentate Schiff base H₃L reacts with cobalt(II) acetate in methanol to form the discrete dinuclear complex Co₂L(OAc)₂(OMe)(H₂O)₂ ( 1 ·2H₂O). The reaction of 1 ·2H₂O with NMe₄OH·5H₂O in methanol gives rise to displacement of the acetate by methanolate groups, yielding Co₂L(OMe)₃(H₂O) ( 2 ·1H₂O). Recrystallizations of the Schiff base, 1 ·2H₂O and 2 ·H₂O in different solvents, produce single crystals of H₃L, 1 ·2.5H₂O and 2 ·2MeOH, respectively. The crystal structures of 1 ·2.5H₂O and 2 ·2MeOH show the cobalt atoms double bridged by and endogenous phenol oxygen atom and an exogenous methanolate oxygen donor, giving rise to Co₂O₂ cores with Co···Co distances of ca. 2.87 Å.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

The effect of octyl glucoside on the lamellar phase of diluted C12E4 and alcohol systems

A systematic study on phase behavior of the mixture of nonionic surfactants with alcohols at 30.0+/-0.1 degrees C was carried out. The total surfactant concentration was kept to 0.1 M varying the mole ratio of n-octyl beta-d-glucopyranoside (OG) and tetraethylene glycol monododecyl ether. Two uniphasic regions were found, the lamellar phase at low OG mole fraction and micelles at high OG mole fraction. The presence of OG favors the lamellae-micelle transition. Alkanols and benzyl alcohol were used as cosurfactants. The more hydrophobic alcohols (octanol and decanol) increase the OG content in the mixed bilayers. On the contrary, benzyl alcohol is not as favorable to the OG incorporation in the lamellar phase as in the mixed micelles. The L(3) phase has only been found as a uniphasic region with hexanol.     

Study of Sb‐doped SnO2 Gray Ceramic Pigment with Cassiterite Structure

In this study, Sb_xSn_1?xO₂ (0 ≤ x ≤ 0.5) compositions were synthesized by the ceramic method from Sb₂O₃‐SnO₂ and Sb₂O₅‐SnO₂ mixtures and characterized by Differential thermal analysis (DTA) and thermogravimetric analysis (TG), X‐ray diffraction, UV‐V‐NIR spectroscopy and CIE L*a*b* (Commission Internationale de l'Eclairage L*a*b*) parameters measurements. Solid solutions with cassiterite structure were obtained at 1300 °C. These solid solutions are stable into glazes. From Sb₂O₃, light gray coloured materials were obtained. From Sb₂O₅, bluish gray coloured materials were obtained at 1300 °C/6h when x ≥ 0.3. Sb_xSn_1?xO₂ with 0.3 ≤ x < 0.5, T = 1300 °C and Sb₂O₅ might be established as compositional range, fired temperature and antimony precursor to obtain gray ceramic pigments in this system.     

Reactivity of 2-acylaminoacrylates with ketene diethyl acetal; [2 + 2] cycloadditions vs. tandem condensations

The reactivity of 2-acylaminoacrylates with ketene diethyl acetal can be modulated by means of thermal conditions to yield cyclobutanes for the preparation of protected beta-hydroxycyclobutane-alpha-amino acids, or catalytic conditions that yield cyclohexanes by tandem condensations to obtain interesting building blocks that are alternatives to Danishefsky's diene.     

Insights into the absorption of carbon dioxide by zinc substrates: isolation and reactivity of di- and tetranuclear zinc complexes

The heptadentate Schiff base H(3)L can react with zinc acetate to form the discrete dinuclear complex Zn(2)L(OAc)(H(2)O), 1.H(2)O. The reaction of 1.H(2)O with NMe(4)OH.5H(2)O both in air and under an argon stream has been investigated. On one hand, this reaction in air yields the tetranuclear complex (Zn(2)L)(2)(CO(3))(H(2)O)(6), 2.5H(2)O, by spontaneous absorption of adventitious carbon dioxide. This process can be reverted in an acetic acid medium, whereas the treatment of 2.5H(2)O with methanoic acid yields crystals of [Zn(2)L(HCOO)].0.5MeCN.1.25MeOH.2H(2)O, 3.0.5MeCN.1.25MeOH.2H(2)O. On the other hand, the interaction under an argon atmosphere of 1.H(2)O with NMe(4)OH.5H(2)O in methanol allows the isolation of the dinuclear complex Zn(2)L(OMe)(H(2)O)(4), 4.4H(2)O. Recrystallisations of 1.H(2)O, 2.5H(2)O and 4.4H(2)O, in different solvents, yielded single crystals of 1.MeCN.2.5H(2)O, 2.4MeOH and 4.3MeOH.H(2)O, respectively. The crystal structure of 2.4MeOH can be understood as resulting from an unusual asymmetric tetranuclear self-assembly from two dinuclear units, and shows three different geometries around the four zinc atoms.     

Direct quantitation of volatile organic compounds in packaging materials by headspace solid-phase microextraction-gas chromatography-mass spectrometry

The quantification of volatile organic compounds (VOCs) in flexible multilayer packaging materials using headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) was studied. The analytes imclude 22 compounds such as aldehydes. ketones, carboxylic acids and hydrocarbons formed by thermooxidative degradation of polyethylene during the extrusion coating process in the manufacture of the packaging, and many of them are involved in the unpleasant and undesirable odour of these materials. External standard calibration using a solution of the analytes in an appropriate solvent was the first approach studied. Aqueous solutions of the analytes provided low reproducibility and the reduction of aldehydes to alcohols under the HS-SPME conditions. Hexadecane was chosen as the solvent since its polarity is similar to that of polyethylene and its volatility is lower than that of the analytes. However, hexadecane should be added to the sample before the analysis as it modifies the absorption capacity of the fibre. A 75-microm Carboxen-poly(dimethylsiloxane) fibre was used to extract the VOCs from the headspace above the packaging in a 15-ml sealed vial at 100 degrees C after 5 min of preincubation. The influence of the extraction time on the amount extracted was studied for a standard solution of the analytes in hexadecane, together with the influence of the volume of the standard solution and the amount of the sample placed in the vial. Standard addition and multiple HS-SPME were also studied as calibration methods and the results obtained in the quantitative analysis of a packaging material were compared.     

Monitoring and Evolution of the Pollution by Volatile Organic Compounds (Vocs) in the Groundwaters of The Najerilla River Basin (Spain)

VOCs were detected and identified in the water of several wells in the area of Nájera (La Rioja). The past uncontrolled spills from an important painting and varnishing industry and from other smaller ones devoted to the manufacture of furniture and varnishing activities were the sources of the VOCs plume detected in this aquifer. This article shows the results obtained in the monitoring and assessment of the pollution at 18 sampling points for more than a year. It has allowed us to study the evolution of the different pollutants and the influence of a remediation process applied by the company in the main pollution source. The analytical method is based on headspace-solid-phase microextraction (SPME) using a 75-μm carboxen-polydimethylsiloxane fibre. Quantification was carried out by gas chromatography with flame ionization detection. This method has allowed us to determine the 13 VOCs identified in the polluted underground samples providing good sensitivity (LOD between 0.1 and 6.0 ng/mL) and reproducibility (r.s.d. less than 10%).