A study of equilibrium between cadmium cyanide and alkali halides and thiocyanate by solubility measurements

Summary A study of the Cd(CN)₂ +x X^– [Cd(CN)₂X _x ] ^x– equilibrium (where X = Cl, Br or CNS) has been carried out at 18° and 38° by measuring the solubility of cadmium cyanide in potassium chloride, bromide and thiocyanate at various concentrations, and at a high ionic strength (6 M) maintained with sodium perchlorate to minimise the effect of activity coefficients. Equilibrium constants forx = 1 and 2 have been calculated and clearly favour the situation wherex = 1. H values for the dissociation of [Cd(CN)₂X]^– have also been calculated.     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.     

New exact solutions of Einstein—Maxwell equations for magnetostatic fields

The symmetry reduction method based on the Fréchet derivative of differential operators is applied to investigate symmetries of the Einstein-Maxwell field equations for magnetostatic fields, which is a coupled system of nonlinear partial differential equations of the second order. The technique yields invariant transformations that reduce the given system of partial differential equations to a system of nonlinear ordinary differential equations. Some of the reduced systems are further studied to obtain the exact solutions.     

First principle electronic structure calculations of ternary alloys Hg1−xMnxTe in zinc-blende structure

We have investigated the structural, electronic, magnetic and optical properties of Hg_1?xMn_xTe in the zinc-blende phase for 0≤x≤1. The calculations were performed by using the full potential linearized augmented plane wave plus local orbitals method within the framework of the density functional theory. The lattice constants of Hg_1?xMn_xTe at different Mn concentrations exhibit Vegard's law perfectly. For spin-up channel the Mn 3d bands are occupied and mixed with the Te 5p bands whereas for spin-down channel the Mn 3d bands are unoccupied. The values of the p–d exchange splitting energy, ?_x(pd) as produced by the Mn 3d states are given. The contribution of the valence band and the conduction band in the process of exchange and splitting is described by the exchange coupling constants N₀α and N₀β. Due to p–d hybridization the magnetic moment of the Mn atom reduces, which results in small local magnetic moments on the non-magnetic Hg and Te sites. The potential applications of Hg_1?xMn_xTe in infrared device have been discussed on the basis of its optical properties.     

Emulsion of aqueous-based nonspherical droplets in aqueous solutions by single-chain surfactants: templated assembly by nonamphiphilic lyotropic liquid crystals in water

Single-chain surfactants usually emulsify and stabilize oily substances into droplets in an aqueous solution. Here, we report a coassembly system, in which single types of anionic or non-ionic surfactants emulsify a class of water-soluble nonamphiphilic organic salts with fused aromatic rings in aqueous solutions. The nonamphiphilic organic salts are in turn promoted to form droplets of water-based liquid crystals (chromonic liquid crystals) encapsulated by single-chain surfactants. The droplets, stabilized against coalescence by encapsulated in a layer (or layers) of single chain surfactants, are of both nonspherical tactoid (elongated ellipsoid with pointy ends) and spherical shapes. The tactoids have an average long axis of ～9 μm and a short axis of ～3.5 μm with the liquid crystal aligning parallel to the droplet surface. The spherical droplets are 5-10 μm in diameter and have the liquid crystal aligning perpendicular to the droplet surface and a point defect in the center. Cationic and zwitterionic surfactants studied in this work did not promote the organic salt to form droplets. These results illustrate the complex interplay of self-association and thermodynamic incompatibility of molecules in water, which can cause new assembly behavior, including potential formation of vesicles or other assemblies, from surfactants that usually form only micelles. These unprecedented tactoidal shaped droplets also provide potential for the fabrication of new soft organic microcapsules.     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Acidity and aniline alkylation activity of mixed Fe-Al pillared montmorillonites

Al-pillared, Fe-pillared and mixed Fe-Al pillared systems have been prepared and characterized using EDX and XRD analyses, surface area pore volume and acidity measurements. Mixed systems are found to be superior to single oxide pillared systems in terms of acidity and aniline methylation activity. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis and Characterization of Sterculia Gum Based pH Responsive Drug Delivery System for Use in Colon Cancer

The present study deals with the modification of sterculia gum to develop the novel colon specific delivery system for use in colon cancer. The sterculia and acrylic acid based hydrogels were synthesized and characterized with FTIR, SEMs, TGA and swelling behavior. Swelling studies of the hydrogels were carried out as a function of reaction parameters such as monomer concentration, initiator concentration, amount of sterculia gum and crosslinker concentration and nature of swelling mediums. Swelling kinetics of the hydrogels and in vitro release dynamics of anticancer model drug methotrexate from the hydrogels were studied to evaluate the swelling mechanism and drug release mechanism from the drug-loaded hydrogels. The values of diffusion exponent for the release of drug were 0.883, 0.910 and 0.787 in distilled water, pH 2.2 buffer and pH 7.4 buffer, respectively. The release of drug from the polymer matrix occurred through a non -Fickian type diffusion mechanism.     

Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection

We report results of the studies relating to the fabrication and characterization of a conducting polymer based molecularly imprinted para-nitrophenol (PNP) sensor. A water pollutant, para-nitrophenol is electrochemically imprinted with polyvinyl sulphonic acid (PVSA) doped polyaniline onto indium tin oxide (ITO) glass substrate. This PNP imprinted electrode (PNPI-PANI-PVSA/ITO) prepared via chronopotentiometric polymerization and over-oxidation is characterized by Fourier transform infra-red spectroscopy (FT-IR), UV–visible (UV–vis) spectroscopy, contact angle (CA), scanning electron microscopy (SEM), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) studies. The response studies of PNPI-PANI-PVSA/ITO electrode carried out using DPV reveal a lower detection limit of 1 × 10⁻³ mM, improved sensitivity as 1.5 × 10⁻³ A mM⁻¹ and stability of 45 days. The PNPI-PANI-PVSA/ITO electrode shows good precision with relative standard deviation of 2.1% and good reproducibility with standard deviation of 3.78%.