All-trans-N-retinylidenetryptamine Schiff base in surfactant solubilized water pools in heptane—a fluorescence study

All-trns-N-retinylidenetryptamine Schiff base was incorporated into aerosol-OT (AOT, sodium bis(2-ethylhexyl)sulphosuccinate)/heptane reverse micelles. This micellar system was used as a model to study the retinal-tryptophan interactions in retinal proteins. The retinylidene Schiff base remains stable in the presence of reverse micelle-solubilized water pools. Partition coefficient and microviscosity measurements show that the Schiff base is located in the micellar interphase. The results are discussed in terms of the interaction between the retinylidene chromophore and the active site environment of rhodopsin and bacteriorhodopsin. In the present model, the quencher and emitting units are covalently attached, and are separated by two carbon spacer units. The fluorescence emission data obtained for the micelle-intercalated Schiff base chromophore are compared with the fluorescence of the native protein and intermediates in the photochemical cycle of bacteriofhodopsin. A comparison of the data obtained for tryptamine and the Schiff base with the results available for bacteriorhodopsin and bacterioopsin reveals that there is a large degree of quenching on intercalation of the retinylidene chromophore in the vicinity of the fluorophore. Evidence provided by this model suggests that energy transfer to retinal can occur from tryptophan residues located in the retinal pocket in the native protein. Thus the retinylidene unit can act as a quencher of the energy of tryptophan, the nature and extent of which may depend on the conformation and relative orientation of the protein-bound fluorophore.     

Attachment of an electron-withdrawing fluorophore to a cryptand for modulation of fluorescence signaling

The laterally nonsymmetric aza cryptand synthesized by condensing tris(2-aminoethyl)amine (tren) with tris[2-[(3-(oxomethyl)phenyl)oxy]ethyl]mine readily forms mononuclear inclusion complexes with both transition- and main-group-metal ions. The fluorophore 7-nitrobenz-2-oxa-1,3-diazole is attached to one of the secondary amines, to give an integrated fluorophore-receptor configuration. The fluorophoric system does not show any appreciable emission when excited due to an efficient photoinduced intramolecular electron transfer (PET) from the nitrogen lone pair. When a metal ion enters the cavity, the PET is blocked, causing recovery of fluorescence; Cd(II) gives the highest quantum yield. The fluorophore, with pi-accepting ability, drastically alters the binding property of the cryptand. With perchlorate or tetrafluoroborate salts of Cd(II), the metal ion enters the cavity, causing recovery of fluorescence. However, in the presence of coordinating ions such as Cl-, N3-, and SCN-, the metal ion comes out of the cavity, causing PET to take place once again, and the fluorescence is lost. Thus, translocation of Cd(II) between the inside and outside of the cryptand cavity can lead to a reversible fluorescence on/off situation.     

Dialumenes – aryl vs. silyl stabilisation for small molecule activation and catalysis

Main group multiple bonds have proven their ability to act as transition metal mimics in the last few decades. However, catalytic application of these species is still in its infancy. Herein we report the second neutral NHC-stabilised dialumene species by use of a supporting aryl ligand (3). Different to the trans-planar silyl-substituted dialumene (3Si), compound 3 features a trans-bent and twisted geometry. The differences between the two dialumenes are explored computationally (using B3LYP-D3/6-311G(d)) as well as experimentally. A high influence of the ligand''s steric demand on the structural motif is revealed, giving rise to enhanced reactivity of 3 enabled by a higher flexibility in addition to different polarisation of the aluminium centres. As such, facile activation of dihydrogen is now achievable. The influence of ligand choice is further implicated in two different catalytic reactions; not only is the aryl-stabilised dialumene more catalytically active but the resulting product distributions also differ, thus indicating the likelihood of alternate mechanisms simply through a change of supporting ligand.

Ligand controlled reactivity: a trans-bent and twisted geometry enables dihydrogen activation and enhanced catalytic activity for NHC-stabilised dialumenes.     

Quinolinic acid as a reagent for the gravimetric and volumetric estimation of palladium

Summary Like -amino-picolinic acid, quinolinic acid behaves as a highly selective reagent for palladium with which it forms a complex of composition Pd(C₇H₄O₄N)₂. The complex being very stable is precipitated from solutions with an acidity of 0.25 N to a maximum p_H of 2.1 and thus is separated from all the common ions and other platinum metals except copper which, however, can be kept in solution in presence of EDTA. The palladium complex is either weighed after drying or dissolved in a standard potassium cyanide solution which is later back titrated with silver nitrate solution.     

“Dial-In” Emission from a Unique Flexible Material with Polarization Tuneable Spectral Intensity

The development of organic photoluminescent materials, which show promising roles as catalysts, sensors, organic light-emitting diodes, logic gates, etc., is a major demand and challenge for the global scientific community. In this context, a photoclick polymerization method is adopted for the growth of a unique photoluminescent three-dimensional (3D) polymer film, E, as a model system that shows emission tunability over the range 350–650 nm against the excitation range 295–425 nm. The DFT analysis of energy calculations and π-stacking supports the spectroscopic observations for the material exhibiting a broad range of emission owing to newly formed chromophoric units within the film. Full polarization spectroscopic Mueller matrix studies were employed to extract and quantify the molecular orientational order of both the ground (excitation) and excited (emission) state anisotropies through a set of newly defined parameters, namely the fluorescence diattenuation and fluorescence polarizance. The information contained in the recorded fluorescence Mueller matrix of the organic polymer material provided a useful way to control the spectral intensity of emission by using pre- and post-selection of polarization states. The observation was based on the assumption that the longer lifetime of the excited dipolar orientation is attributed to the compactness of the film.     

Direct meta-C−H Perfluoroalkenylation of Arenes Enabled by a Cleavable Pyrimidine-Based Template

The development of efficient and mild methods for the synthesis of organofluorine compounds is of foremost interest in various fields of chemistry. A direct pyrimidine-based selective meta-C−H perfluoroalkenylation of arenes involving several commercially available perfluoroolefins is described. The synthetic versatility of the protocol is demonstrated by an extensive substrate scope including different benzylsulfonyl, alkylarene and phenylacetic acid scaffolds. The generality of this methodology including the meta-C−H perfluoroalkenylation of Ibuprofen, the facile cleavage of the directing group and gram-scale reactions are presented.     

Heteroarene-tethered Functionalized Alkyne Metamorphosis

Heteroarene-tethered functionalized alkynes are multipotent synthons in organic chemistry. This detailed Review described herein offers a thorough discussion of the metamorphosis of heteroarene-tethered functionalized alkynes, an area which has earned much attention over the past decade in the straightforward synthesis of architecturally complex heterocyclic scaffolds in atom and step economic manner. Depending upon the variety of functionalized alkynes, this Review is divided into multiple sections. Amongst the vast array of synthetic transformations covered, dearomatizing spirocyclizations and cascade spirocyclization/rearrangement are of great interest. Synthetic transformations involving the heteroarene-tethered functionalized alkynes with scope, challenges, limitations, mechanism, their application in the total synthesis of natural products and future perceptions are surveyed.     

Influence of composition and roughness on the pigment mapping of paintings using mid-infrared fiberoptics reflectance spectroscopy (mid-IR FORS) and multivariate calibration

Mid-infrared fiberoptics reflectance spectroscopy (mid-IR FORS) is a very interesting technique for artwork characterization purposes. However, the fact that the spectra obtained are a mixture of surface (specular) and volume (diffuse) reflection is a significant drawback. The physical and chemical features of the artwork surface may produce distortions in the spectra that hinder comparison with reference databases acquired in transmission mode. Several studies attempted to understand the influence of the different variables and propose procedures to improve the interpretation of the spectra. This article is focused on the application of mid-IR FORS and multivariate calibration to the analysis of easel paintings. The objectives are the evaluation of the influence of the surface roughness on the spectra, the influence of the matrix composition for the classification of unknown spectra, and the capability of obtaining pigment composition mappings. A first evaluation of a fast procedure for spectra management and pigment discrimination is discussed. The results demonstrate the capability of multivariate methods, principal component analysis (PCA), and partial least squares discrimination analysis (PLS-DA), to model the distortions of the reflectance spectra and to delimitate and discriminate areas of uniform composition. The roughness of the painting surface is found to be an important factor affecting the shape and relative intensity of the spectra. A mapping of the major pigments of a painting is possible using mid-IR FORS and PLS-DA when the calibration set is a palette that includes the potential pigments present in the artwork mixed with the appropriate binder and that shows the different paint textures. Graphical Abstract

?     

Click approaches in sol–gel chemistry

The combination of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction with sol–gel processing enables the versatile preparation of sol–gel materials under different shapes with targeted functionalities through a diversity-oriented approach. In this account, the development of the CuAAC reaction under anhydrous conditions for the synthesis of sol–gel precursors and for the assembling of magnetic nanoparticles on self-assembled monolayers is related, as well as the use of the classical CuAAC methodologies for the functionalization of mesoporous silica nanoparticles and microdots arrays. Coupling CuAAC and Sol–Gel will result in simplified preparations of multifunctional materials with controlled morphologies.