MEASUREMENT OF CONTACT ANGLE IN A CLEARANCE-FIT PIN-LOADED HOLE

A simple experimental technique using an instrumented pin was developed for the measurement of the load-contact variation in a clearance-fit, pin-loaded hole. The method is applicable to both conducting and nonconducting materials.     

Determination of traces of palladium using radioactive zinc dithizonate as a reagent

A radioreagent method for the analysis of traces of palladium using radioactive zinc dithizonate as the reagent has been developed. The method is rapid, highly selective and palladium concentration down to 2 g present in 10 ml solution can be measured.     

Oxidation of some catecholamines by sodium N-chloro-p-toluenesulfonamide in acid medium: A kinetic and mechanistic approach

The kinetics of the oxidation of five catecholamines viz., dopamine (A), L-dopa (B), methyldopa (C), epinephrine (D) and norepinephrine (E) by sodium N-chloro-p-toluenesulfonamide or chloramine-T (CAT) in presence of HClO₄ was studied at 30±0.1 °C. The five reactions followed identical kinetics with a first-order dependence on [CAT] _o , fractional-order in [substrate] _o , and inverse fractional-order in [H⁺]. Under comparable experimental conditions, the rate of oxidation of catecholamines increases in the order D>E>A>B>C. The variation of ionic strength of the medium and the addition of p-toluenesulfonamide or halide ions had no significant effect on the reaction rate. The rate increased with decreasing dielectric constant of the medium. The solvent isotope effect was studied using D₂O. A Michaelis-Menten type mechanism has been suggested to explain the results. Equilibrium and decomposition constants for CAT-catecholamine complexes have been evaluated. CH₃C₆H₄SO₂NHCl of the oxidant has been postulated as the reactive oxidizing species and oxidation products were identified. An isokinetic relationship is observed with β=361 K, indicating that enthalpy factors control the reaction rate. The mechanism proposed and the derived rate law are consistent with the observed kinetics.     

Dip-pen nanolithography in tapping mode

Dip-pen nanolithography (DPN) is becoming a popular nano-patterning technique for depositing materials onto a substrate using the probe of an atomic force microscope (AFM). Here, we demonstrate the deposition of a short synthetic peptide by DPN using the Tapping Mode of AFM rather than the commonly used contact mode. DPN in Tapping Mode requires drive amplitude modifications for deposition, yet allows for gentle imaging of the deposited material and enables deposition on soft surfaces.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Pulse radiolysis of 3-pyridine methanol and 3-pyridine carboxaldehyde in aqueous solutions

Reactions of e_aq ^-, H-atom and OH radicals with 3-pyridine methanol (3-PM) and 3-pyridine carboxaldehyde (3-PCA) have been studied at various pHs using pulse radiolysis technique. e_aq ^- was found to be highly reactive with both 3-PM and 3-PCA (k approx. 10¹⁰ dm³ mol 1 s^-1). Semi-reduced species formed in both cases were strongly reducing in nature. In the case of 3-PM, electron addition leads to the formation of pyridinyl radicals whereas in the case of 3-PCA, PyCHOH type radicals are formed. At pH 6.8, H-atom reaction with 3-PCA also gives semi-reduced species (PyCHOH), whereas at pH 1, H-atoms add to the ring. (CH₃)₂ ^·COH radicals were found to transfer electron to 3-PCA at all the pH values tested and by making use of changes in the absorption spectra, pK _a values of the semi-reduced species were determined to be 4.5 and 10.6. OH radicals were found to undergo addition reaction with 3-PCA, whereas in the case of 3-PM they reacted by H-abstraction as well as addition reaction. By following the yield of methylviologen radical cation formed by electron transfer reaction, it was estimated that approx. 50% of OH radicals react with 3-PM by H-atom abstraction at pH 6.8, giving reducing radicals, whereas at pH 3.2, where 3-PM is in the protonated form, the same is only about 10%. At pH 13, O^-· radical anions were found to react exclusively by H-atom abstraction. Reaction of SO₄ ^-· radicals with 3-PCA was found to give a species identical to the one formed by one electron reduction of nicotinic acid at acidic pH values.     

Heterocyclic nitrogen base adducts of nickel(II)–di(2,4-dibromophenyl)carbazonate

The title complex was prepared and characterized by elemental and spectral analyses. The formation constants of various heterocyclic nitrogen base adducts with the Ni^II–di(2,4-dibromophenyl)carbazonate have been determined in a monophase by spectrophotometry at 25 ± 0.1 °C. The monodenatate and bidentate bases form penta- and hexa-coordinated adducts respectively with 1:1 stoichiometry for the metal chelate-base, whereas the unsaturated monodentate bases form hexa-coordinated adducts with 1:2 stoichiometry. The behaviour of saturated heterocyclic bases such as pyrrolidine, piperidine, hexamethyleneimine and morpholine towards the metal chelate has been studied, and the results are discussed in terms of steric hindrance, basicity and ring structure.     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

Effect of sodium metasilicate on natural flotability of coal

The effect of the quantity of sodium metasilicate and conditioning time in one set of experiments, and the effect of the solution concentration of sodium metasilicate, added at the same dosage and conditioning time to coal slurry, on flotability of a typical Indian coal in another set of experiments are studied. Two sets of 3² full factorial experiments are carried out to assess the effects of the aforementioned variables. The generated data are analyzed quantitatively and explained qualitatively. At 0.1% (w/v) solution concentration of solution added (0.02 g/kg) and 8 min conditioning time, sodium metasilicate acted as activator for kaolinite, whereas at 1.0% (w/v) solution concentration (0.2 g/kg), it acted as dispersant. The best observed condition of depressant is obtained at an added concentration of 10.0% (w/v, 0.2 g/kg) and 8 min conditioning time. The desired effect of the sodium metasilicate can be achieved by controlling its quantity, solution concentration added, and conditioning time.