Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Investigation of mass attenuation coefficients of water, concrete and bakelite at different energies using the FLUKA Monte Carlo code

The mass attenuation coefficients of water, bakelite and concrete sample defined in the simulation package were obtained using the FLUKA Monte Carlo code at 59.5, 80.9, 140.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. The results for the mass attenuation coefficients obtained by simulation have been compared with experimental and the theoretical ones and good agreement has been observed. The results indicate that this process can be followed to determine the data on the attenuation of gamma-rays with the several energies in other materials. Also, the deposited energy by 661.6 keV photons at several thicknesses of each media was determined as being an important data for radiation shielding studies.     

Features of Fundamental- and Subharmonics ECR Heating in a Magnetic Trap

We compare the efficiency of microwave heating of electrons in a dense plasma at the fundamental harmonics ( = eH/(mc)) and at the subharmonics ( = eH/(2mc)) of the electron gyrofrequency. In particular, recent experimental results showing a higher efficiency of microwave heating at the frequency equal to one half of the electron gyrofrequency are analyzed. Equations describing the nonlinear subharmonic electron cyclotron resonance (ECR) heating are derived for an arbitrary geometry of the microwave field. If the microwave field has the vacuum polarization, then the microwave power absorbed by electrons at the fundamental harmonic of the electron gyrofrequency in rarefied plasmas exceeds by many orders of magnitude the corresponding power absorbed by electrons in the case of nonlinear heating at one half of the electron gyrofrequency. However, it is shown that this difference in a dense plasma does not exceed one order of magnitude, which is explained by the effect of depression of the resonance component of the microwave field. In this case, the efficiency of the formation of high-energy electron population can be influenced not only by the energy-deposition rate but mainly by the stability condition of an electron in the magnetic trap. It is shown that a twofold decrease in the magnetic field, necessary to satisfy the ECR condition at one half of the electron gyrofrequency, leads to a dramatic shortening of the hot-electron lifetime in a magnetic trap and, in turn, to a dramatic decrease in the energy-deposition efficiency. We discuss the dependence of the electron heating on the effect of quasi-static enhancement of the microwave field near a target located in a magnetic trap for the generation of X-ray emission.     

Determination of lead, copper and manganese by graphite furnace atomic absorption spectrometry after separation/concentration using a water-soluble polymer

In this study, a water-soluble polymer, polyvinylpyrrolidinone (PVP) having chelating functionalities was used for the preconcentration and separation of traces of Pb, Cu, Ve and Mn prior to their determination by graphite furnace atomic absorption spectrometry. For this purpose, the sample and the PVP solutions were mixed and the metal bound polymer was precipitated by adding the mixture onto acetone. The precipitate was separated by decantation and dissolved with water. By increasing the ratio of the volumes of sample to water used in dissolving the precipitate, the analyte elements were concentrated as needed. The concentration of trace elements was determined using graphite furnace atomic absorption spectrometry. The analyte elements in matrix free aqueous solutions were quantitatively recovered. The validity of the proposed method was checked with a standard reference material (NIST SRM 1577b bovine liver) and spiked fruit juice, sea water and mineral water samples. The analytical results were found to be in good agreement with certified and added values. Detection limits (3δ) were 1.7, 3.6 and 4.1 μg l⁻¹ for Pb, Cu and Mn, respectively, using 10 μl of sample volume. The method is novel and can be characterized by rapidity, simplicity, quantitative recovery and high reproducibility.     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.     

Characterization of Sixteenth to Nineteenth Century Ottoman Silk Brocades by Scanning Electron Microscopy–Energy Dispersive X-Ray Spectroscopy and High-Performance Liquid Chromatography

Historical textiles in the Topkap? Museum, which are called silk kaftans and brocades by art historians from the sixteenth and nineteenth were characterized by scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) and high-performance liquid chromatography with diode array detection for identification of metal threads and dyestuffs. In the most Ottoman textiles, metal threads, especially belonging to the sultans, were used as the gold gild. Although the chemical composition of the samples on the surface may easily be obtained by SEM–EDX, the thickness of the thin gold layer on metal threads cannot be obtained directly. Hence, the goal of this project is to describe whether metal threads are gilded or not and to measure coating thickness. A new method was developed for measuring the thickness of gold layer, and the modeling was reformed. The SEM–EDX results were interpreted in accordance with the theoretical models. The coating thickness of metal threads was subsequently measured in ancient textiles. The thickness, depth, and valuable metal composition in the threads of the artistic objects were obtained by this approach. Dye analysis was used to characterize the presence of indigotin, carminic acid, ellagic acid, and luteolin in the historical textiles.     

On a technique for determining the predominant orientation of crystal particles in clouds by virtue of polarization measurements in the MM-wave band

We propose a technique for analyzing polarization characteristics of microwave radiation scattered by cloud particles with different distributions over sizes, shape, and spatial orientation. We have found a combination of Stokes parameters that is weakly sensitive to the distribution of the scattering particles over sizes and eccentricities but very sensitive to their distribution over spatial orientation. Institute, of Applied Physics, Nizhny Novgorod, Russia. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 42, No. 9, pp. 839–844, August 1999.     

Silver Nanoparticle Thin Films with Nanocavities for Surface‐Enhanced Raman Scattering

The formation of nanometer‐sized gaps between silver nanoparticles is critically important for optimal enhancement in surface‐enhanced Raman scattering (SERS). A simple approach is developed to generate nanometer‐sized cavities in a silver nanoparticle thin film for use as a SERS substrate with extremely high enhancement. In this method, a submicroliter volume of concentrated silver colloidal suspension stabilized with cetyltrimethylammonium bromide (CTAB) is spotted on hydrophobic glass surfaces prepared by the exposure of the glass to dichloromethysilane vapors. The use of a hydrophobic surface helps the formation of a more uniform silver nanoparticle thin film, and CTAB acts as a molecular spacer to keep the silver nanoparticles at a distance. A series of CTAB concentrations is investigated to optimize the interparticle distance and aggregation status. The silver nanoparticle thin films prepared on regular and hydrophobic surfaces are compared. Rhodamine 6G is used as a probe to characterize the thin films as SERS substrates. SERS enhancement without the contribution of the resonance of the thin film prepared on the hydrophobic surface is calculated as 2×10⁷ for rhodamine 6G, which is about one order of magnitude greater than that of the silver nanoparticle aggregates prepared with CTAB on regular glass surfaces and two orders of magnitude greater than that of the silver nanoparticle aggregates prepared without CTAB on regular glass surfaces. A hydrophobic surface and the presence of CTAB have an increased effect on the charge‐transfer component of the SERS enhancement mechanism. The limit of detection for rhodamine 6G is estimated as 1.0×10^?8 M . Scanning electron microscopy and atomic force microscopy are used for the characterization of the prepared substrate.     

Structure of the mixed state induced in thin YBaCuO superconducting films by the field of a small ferromagnetic particle

The temperature dependence of the local energy barrier to formation of the mixed state in YBaCuO thin-film superconducting samples has been determined. The measurement technique is based on use of a small ferromagnetic particle as the magnetic field source. It is found that the energy barrier to creation of vortices (for the field oriented parallel to the CuO planes) is anomalously small while the dependence of the corresponding threshold current j _c(T) differs substantially from the temperature dependence of the pair-breaking current. The experimental results are interpreted in terms of the model of a Josephson medium. The observed temperature dependence of j _c points to a strong suppression of the superconducting order parameter at the intergrain boundaries, which for the most probable type of boundaries: superconductor-insulator-superconductor, is evidence of anisotropic pairing. Zh. éksp. Teor. Fiz. 116, 1735–1749 (November 1999)