Measurement of the dynamic elastic constants of short isotropic cylinders

A method based on a single test is proposed to characterize the elasticity of an isotropic homogeneous material in the shape of a cylinder of any slenderness (length-diameter) ratio. Firstly, the Rayleigh-Ritz method is used to determine the natural frequencies of the cylinders vibrating axisymmetrically. The study is focused on cylindrical samples with diameter and length of similar magnitude so that the shear modulus and the Poisson ratio can be calculated simultaneously. Subsequently, the theoretical results for cylinders of slenderness ratio between 0.1 and 3 are analyzed in order to obtain the data required to determine the elastic constants from one of the two lowest measured natural frequencies and their quotient. The analysis of the results demonstrates that any slenderness ratio is useful in the calculation of the elastic constants, although in some cases the third natural frequency should be used. Furthermore, the influence of the length-diameter quotient on the sensitivity of the method is analyzed by evaluating the systematic uncertainties for both dynamic elastic constants. Finally, the method is experimentally tested by characterizing two steel cylinders with slenderness ratios 0.1 and 1, respectively. The results demonstrate that uncertainties for both Poisson ratio and the shear modulus are smaller when the slenderness ratio is 1.     

Hydrophilic and hydrophobic copolymer systems based on acrylic derivatives of pyrrolidone and pyrrolidine

This article deals with the synthesis of hydrophilic methacrylic monomers derived from ethyl pyrrolidone [2‐ethyl‐(2‐pyrrolidone) methacrylate (EPM)] and ethyl pyrrolidine [2‐ethyl‐(2‐pyrrolidine) methacrylate (EPyM)] and their respective homopolymers. For the determination of their reactivity in radical copolymerization reactions, both monomers were copolymerized with methyl methacrylate (MMA), the reactivity ratios being calculated by the application of linear and nonlinear mathematical methods. EPM and MMA had ratios of r_EPM = 1.11 and r_MMA = 0.76, and this indicated that EPM with MMA had a higher reactivity in radical copolymerization processes than vinyl pyrrolidone (VP; r_VP = 0.005 and r_MMA = 4.7). EPyM and MMA had reactivity ratios of r_EPyM = 1.31 and r_MMA = 0.92, and this implied, as for the EPM–MMA copolymers, a tendency to form random or Bernoullian copolymers. The glass‐transition temperatures of the prepared copolymers were determined by differential scanning calorimetry (DSC) and were found to adjust to the Fox equation. Total‐conversion copolymers were prepared, and their behavior in aqueous media was found to be dependent on the copolymer composition. The swelling kinetics of the copolymers followed water transport mechanism case II, which is the most desirable kinetic behavior for a swelling controlled‐release material. Finally, the different states of water in the hydrogels—nonfreezing water, freezing bound water, and unbound freezing water—were determined by DSC and found to be dependent on the hydrophilic and hydrophobic units of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 395–407, 2003     

Model of free charge generation in polymers

A time solution of the excimer-ion pair system is presented here with a special attention to the time asymptote. Presented at the Czech-Israeli-German Symposium “Dynamical Processes in Condensed Molecular Systems”, Prague, Czech Republic, 26–30 May 1997. This work was supported by the grant No. C 1050601 of the Grant Agency of the Academy of Sciences of the Czech Republic.     

Interface-induced states with an incommensurate spin-density wave in Fe/Cr-type multilayers

A model is proposed for magnetic ordering in Fe/Cr-type multilayers substantially above the Néel temperature of bulk chromium. Redistribution of the charge (and, hence, spin) density near the Fe/Cr interfaces gives rise to the formation of an essentially inhomogeneous spin-density-wave (SDW) state in the chromium spacer. The spatial structure of the antiferromagnetic order parameter in thick spacers is described. The SDW contribution to the effective exchange coupling between the moments in adjacent iron layers is calculated. The data obtained are used in the interpretation of experimental data on the tunneling spectroscopy of trilayers and neutron diffraction from Fe/Cr superlattices.     

钙钛矿型La_((1 x)/2)Sr_((1-x)/2)Co_(1-x)Cu_xO_3催化CO氧化活性与表征

研究了钙钛矿型LaSrCoCu_xO_3催化剂对CO氧化反应的催化活性及其表面氧的催化作用．结果表明，x＝0．4的催化剂对CO氧化具有最高催化活性，常压及本实验条件下CO完全氧化的最低温度为168℃；催化剂均为氧缺陷化合物，吸附于表面晶格氧缺陷上的吸附氧是CO氧化反应的活性氧物种；并发现催化剂中存在有非常价态的C04 ，认为CO氧化反应是通过吸附氧调变Co3 和Co4 价态而进行．     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.