A sensitive solid-phase fluoroimmunoassay for detection of opiates in urine

An automated flow fluorometer designed for kinetic binding analysis was adapted to develop a solid-phase competitive fluoroimmunoassay for urinalysis of opiates. The solid phase consisted of polymer beads coated with commercial monoclonal antibodies (MAbs) raised against morphine. Fluorescein-conjugated morphine (FL-MOR) was used as the fluorescein-labeled hapten. The dissociation equilibrium constant (K _D ) for the binding of FL-MOR to the anti-MOR MAb was 0.23 nM. The binding of FL-MOR to the anti-MOR MAb reached steady state within minutes and was displaced effectively by morphine and other opiates. Morphine-3-glucuronide (M3G), the major urinary metabolite of heroin and morphine, competed effectively with FL-MOR in a concentration-dependent manner for binding to the antimorphine MAb and was therefore used to construct the calibration curve. The sensitivity of the assay was 0.2 ng/mL for M3G. The assay was effective at concentrations of M3G from 0.2 to 50 ng/mL, with an IC₅₀ of 2 ng/mL. Other opiates and heroin metabolites that showed >50% crossreactivity when present at 1 μg/mL included codeine, morphine-6-glucuronide, and oxycodone. Methadone showed very low crossreactivity (<5%), which is a benefit for testing in patients being treated for opiate addictions. The high sensitivity of the assay and the relatively high cutoff value for positive opiate tests allows very small sample volumes (e.g., in saliva or sweat) to be analyzed. A double-blind comparison using 205 clinical urine samples showed good agreement between this single-step competitive assay and a commercially performed enzyme multiplied immunoassay technique for the detection of opiates and benzoylecgonine (a metabolite of cocaine).     

Structural characterization of nanosized CeO(2)-SiO(2), CeO(2)-TiO(2), and CeO(2)-ZrO(2) catalysts by XRD, Raman, and HREM techniques

Structural characteristics of nanosized ceria-silica, ceria-titania, and ceria-zirconia mixed oxide catalysts have been investigated using X-ray diffraction (XRD), Raman spectroscopy, BET surface area, thermogravimetry, and high-resolution transmission electron microscopy (HREM). The effect of support oxides on the crystal modification of ceria cubic lattice was mainly focused. The investigated oxides were obtained by soft chemical routes with ultrahighly dilute solutions and were subjected to thermal treatments from 773 to 1073 K. The XRD results suggest that the CeO(2)-SiO(2) sample primarily consists of nanocrystalline CeO(2) on the amorphous SiO(2) surface. Both crystalline CeO(2) and TiO(2) anatase phases were noted in the case of CeO(2)-TiO(2) sample. Formation of cubic Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) (at 1073 K) were observed in the case of the CeO(2)-ZrO(2) sample. Raman measurements disclose the fluorite structure of ceria and the presence of oxygen vacancies/Ce(3+). The HREM results reveal well-dispersed CeO(2) nanocrystals over the amorphous SiO(2) matrix in the cases of CeO(2)-SiO(2), isolated CeO(2), and TiO(2) (anatase) nanocrystals, some overlapping regions in the case of CeO(2)-TiO(2), and nanosized CeO(2) and Ce-Zr oxides in the case of CeO(2)-ZrO(2) sample. The exact structural features of these crystals as determined by digital diffraction analysis of HREM experimental images reveal that the CeO(2) is mainly in cubic fluorite geometry. The oxygen storage capacity (OSC) as determined by thermogravimetry reveals that the OSC of the mixed oxide systems is more than that of pure CeO(2) and is system dependent.     

Substituent electronic effects on the persistence and absorption spectra of (Z)-o-xylylenols. A nanosecond laser flash photolysis study

[reaction: see text] A systematic investigation on a broad set of aldehydes reveals that the lifetimes of (Z)-photoenols can be modulated by variation of the substituents. We have found that the lifetimes of (Z)-enols (in benzene) can be varied by more than 1 order of magnitude with a judicious choice of the substituents that exert mesomeric and inductive effects as, for example, in the case of pentamethylbenzaldehyde (tau = 35 ns) and dicyanomesitaldehyde (tau = 760 ns). This study thus points to the fact that the electronic factors in conjunction with hydrogen bonding stabilization can considerably broaden the uni- as well as bimolecular chemistry based on photoenolization. Further, we have shown that the photoenols exhibit dramatic shifts in their absorption properties with variation of the substituents; although the photoenols have long been considered to be colored, their absorption properties have not been heretofore comprehensively examined.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

Oxidations with IBX: benzyl halides to carbonyl compounds, and the one-pot conversion of olefins to 1,2-diketones

A variety of benzyl halides were converted to the corresponding aldehydes/ketones in respectable yields by IBX in DMSO at 65 °C. The bromohydrin reaction of olefins using NBS-H₂O in DMSO can be nicely adapted to IBX-mediated oxidation of benzyl halides in such a way that olefins are converted to the corresponding 1,2-diketones in good isolated yields in one-pot.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Chaos in thermal pulse combustion

An experimental thermal pulse combustor and a differential equation model of this device are shown to exhibit chaotic behavior under certain conditions. Chaos arises in the model by means of a progression of period-doubling bifurcations that occur when operating parameters such as combustor wall temperature or air/fuel flow are adjusted to push the system toward flameout. Bifurcation sequences have not yet been reproduced experimentally, but similarities are demonstrated between the dynamic features of pressure fluctuations in the model and experiment. Correlation dimension, Kolmogorov entropy, and projections of reconstructed attractors using chaotic time series analysis are demonstrated to be useful in classifying dynamical behavior of the experimental combustor and for comparison of test data to the model results. Ways to improve the model are suggested. (c) 1995 American Institute of Physics.     

Acid activated montmorillonite and vermiculite clays as dehydration and cracking catalysts

Treatment of montmorillonite and vermiculite with hydrochloric acid results in an overall increase in acidity and acidic sites. IR and DSC studies of base adsorbed catalysts have revealed the heterogeneity of surface acidity on the activated catalysts. Clay catalysts have been found to dehydrate 1-butanol to 1-butene, which directly isomerizes tocis- andtrans-2-butenes, confirming the presence of Lewis and Brönsted acid sites. Cumene cracking studies using the clay catalyst also confirm the presence of Brönsted acid sites. The temperature and concentration of acid have been found to have a significant influence on the catalytic activity.