Synthesis and Characterization of Ge(II), Sn(II), and Pb(II) Monoamides with -NH2 Ligands

The synthesis and characterization of the first divalent germanium, tin, and lead monoamide derivatives of the parent amide group -NH(2) are presented. They have the general formula (ArMNH(2))(2) (M = Ge, Ar = Ar'(C(6)H(3)-2,6-Pr(i)(2)) or Ar* (C(6)H(3)-2,6(C(6)H(2)-2,4,6-Pr(i)(3))); M = Sn, Ar = Ar*; M = Pb, Ar = Ar*). For germanium and tin, they were obtained by reacting the corresponding terphenyl halides of the group 14 elements with liquid ammonia in diethyl ether. The lead amide derivative (Ar*PbNH(2))(2) was synthesized by reaction of LiNH(2) with Ar*PbBr in diethyl ether. The compounds were characterized by IR and multinuclear NMR spectroscopies and by X-ray crystallography in the case of the (Ar'GeNH(2))(2) or (Ar*SnNH(2))(2) derivatives. They possess dimeric structures with two -NH(2) groups bridging the germanium and tin centers. For lead, the reaction with ammonia led to isolation of a stable ammine complex of formula Ar*PbBr(NH(3)) which was characterized by IR and NMR spectroscopies and by X-ray crystallography. It is the first structural characterization of a divalent lead ammine complex.     

Two-photon excited photoluminescence of photonic quantum ring laser structures

We report on the two-photon excited photoluminescence of photonic quantum ring laser structures using Ti:Sapphire femtosecond pulsed laser. Using two-photon excited photoluminescence microscopy, we were able to image the laser structures when optically excited and compare the results with previously obtained images on electrically pumped photonic quantum ring lasers. We also propose a method to evaluate the Rayleigh band on the circumference of these structures.     

Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

“Surface water” and “strong-bonded water” in cyclodextrins: a Karl Fischer titration approach

Cyclodextrins are some of the most used carriers for bioactive compounds (as host–guest complex) and many factors influence the association–dissociation of this complex, some of them being related to hydrophobicity. In the solid state, cyclodextrins contain two types of water molecules: “surface” water molecules (especially close to the crystal surface) and “strong-bonded” water molecules (especially from the cyclodextrin cavity), but the classification is hard to do, and the concentration of these water molecules are relatively difficult to estimate by simple methods. In the present study we used the volumetric Karl Fischer titration to estimate these types of water molecules in cyclodextrins by means of the rate of water reaction (related to diffusion from cyclodextrin crystals). “Surface” water molecules are titrated with rates between 1.8–2.8 mM/s for α-cyclodextrin, while for β-cyclodextrin these rates are little bit higher (2.9–3.4 mM/s). The rates corresponding to “strong-bonded” water molecules are approximately tens fold lower (0.05–0.3 mM/s for α-cyclodextrin and 0.15–0.33 mM/s for β-cyclodextrin). The approximate ratio between “surface” and “strong-bonded” water molecules could also be estimated by this simple and rapid method.     

Polyol-modified layered double hydroxides with attenuated basicity for a truly reversible capture of CO2

Dendrimers bearing hydroxyl groups supported by layered double hydroxides (CO₃–LDH) with Mg/Al ratio ranging from 1:1 to 5:1 showed improved properties for the reversible capture of carbon dioxide (CO₂). The adsorption capacity of the starting LDH was due to the intrinsic base-like behavior, and was found to depend on the Mg/Al ratio. When contacted with polyol dendrimers in aqueous media, no intercalation took place. This was explained in terms of low exfoliation grade of LDH and hydrophobic character of the dendrimer molecules. The latter rather adsorb on the external surface of the LDH stacks for low dendrimer loadings, or aggregate into organic clusters for higher contents. Analyses through thermal programmed desorption of CO₂ revealed that dendrimer incorporation advantageously attenuates the basicity strength of the starting LDH support, by lowering the desorption temperature. The OH groups of the organic moiety were found to display an amphoteric character, and act as the main adsorption sites. The weak interactions with CO₂ facilitate easier release of the major part of adsorbed CO₂ at temperature not exceeding 80–100 °C. On polyol organo-LDHs, the reversible CO₂ retention was discussed herein in terms of acid–base interactions. This concept allows envisaging the capture of diverse pollutants and other greenhouse gases by modifying the chemical groups on the dendritic moiety.     

Towards a receptor-free immobilization and SERS detection of urinary tract infections causative pathogens

Based on molecular-specific surface-enhanced Raman scattering (SERS) spectroscopy we were able to discriminate between rough and smooth strains of Escherichia coli and Proteus mirabilis bacteria. For this purpose, bacteria have been immobilized through electrostatic forces by inducing a positive charge on the glass slide. This way, SERS spectra on bacterial biomass and also on single bacteria could be recorded in less than 2 h, by using concentrated silver nanoparticles as SERS-active substrate. Single-bacterium SERS spectral fingerprints showed to be sensitive to the presence of the O-antigen at strain level and to the microorganisms growth phase. By using principal component analysis (PCA) on the SERS spectra recorded from E. coli and P. mirabilis, these two uropathogens could be fairly discriminated.     

Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (R_ct) and double layer capacitance (C_dl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of E_LUMO, E_HOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.