Redox behaviour of cysteine in the presence of ammonium trioxovanadate(V)

The interaction of ammonium trioxovanadate(V) with cysteine in aqueous solution was studied by cyclic voltammetry and absorption spectroscopy techniques. In the absence of cysteine, the cyclic voltammogram (CV) of ammonium trioxovanadate(V) solution in 0.1 M phosphate buffer (pH 7) gave two peaks at -0.130 V (reversible) and -0.400 V (irreversible). These peaks (-0.130 V, -0.400 V) can be attributed to V(V)/V(IV) and V(IV)/V(III) redox processes, respectively. In the presence of cysteine at low scan rate (40 mV/s), the peak at -0.780 V, which is assigned to the irreversible reduction of free cystine, was observed. In addition, the reduction peak of the disulfidic anion S(2)(2-) was seen at -0.650 V. Under aerobic conditions, the peaks of the disulfidic anion S(2)(2-) and free cystine are well separated. From electronic spectra of ammonium trioxovanadate(V) and cysteine mixtures, LMCT transition associated with V(V)-cyteine complex was obtained at 743 nm. The stoichiometry (ML(2)) and stability constant (log beta(1:2)=6.67) of V(V)-cysteine complex were determined by means of mole ratio method.     

Suzuki coupling reactions of 2,4,6-trialkoxyphenylboronic acids with enol triflates: asymmetric synthesis of a lactone template for calyxin assemblage

Suzuki coupling reactions between 2,4,6-trialkoxyphenylboronic acids and enol triflates have been found to occur in excellent yield, while the use of an enol tosylate failed to give any of the desired product. This coupling reaction has led to the synthesis of a lactone which could serve as a precursor to several calyxin analogues.     

Reference value standards for pH measurements in 10, 30, 50, and 70% (w/w) 2-propanol/water solvent mixtures at temperatures from 288.15 to 318.15 K

Reference value standards, pH (RVS), for 0.05 mol kg^?1 potassium hydrogenphthalate (KHPh) reference buffer solutions in 10, 30, 50 and 70% (w/w) 2-propanol/water solvent mixtures at temperatures from 288.15 to 318.15 K are determined from reversible e.m.f. measurements of the cell Pt¦H₂¦KHPh + KCl¦AgCl¦Ag¦Pt. The consistency of the present results is confirmed by multilinear regression analysis of the pH values obtained for each solution composition and temperature, allowing appropriate interpolation of pH (RVS) values within the range of the experiment. The ancillary values of the standard e.m.f. of the cell Pt¦H₂¦HCl¦AgCl¦Ag¦Pt are optimized through multilinear regression analysis of the available data in the literature, and the ancillary values of the first ionization constant of o-phthalic acid (H₂Ph; benzene-1,2-dicarboxylic acid) in these solvent mixtures are evaluated from reversible e.m.f. measurements of the cell Pt¦H₂¦H₂Ph + KHPh + KCl¦AgCl¦Ag¦Pt.     

Structural Patterns and Dimensionality in Magnesium Borophosphates: The Crystal Structures of Mg2(H2O)[BP3O9(OH)4] and Mg(H2O)2[B2P2O8(OH)2]·H2O

Hydrothermal investigations in the system MgO/B₂O₃/P₂O₅(/H₂O) yielded two new magnesium borophosphates, Mg₂(H₂O)[BP₃O₉(OH)₄] and Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O. The crystal structures were solved by means of single crystal X‐ray diffraction. While the acentric crystal structure of Mg₂(H₂O)[BP₃O₉(OH)₄] (orthorhombic, P2₁2₁2₁ (No. 19), a = 709.44(5) pm, b = 859.70(4) pm, c = 1635.1(1) pm, V = 997.3(3) × 10⁶ pm³, Z = 4) contains 1D infinite chains of magnesium coordination octahedra interconnected by a borophosphate tetramer, Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O (monoclinic, P2₁/c (No. 14), a = 776.04(5) pm, b = 1464.26(9) pm, c = 824.10(4) pm, β = 90.25(1)°, V = 936.44(9) × 10⁶ pm³,Z = 4) represents the first layered borophosphate with 6³ net topology. The structures are discussed and classified in terms of structural systematics.     

Co3O4−CeO2 Nanocomposites for Low-Temperature CO Oxidation

In an effort to combine the favorable catalytic properties of Co₃O₄ and CeO₂, nanocomposites with different phase distribution and Co₃O₄ loading were prepared and employed for CO oxidation. Synthesizing Co₃O₄-modified CeO₂ via three different sol-gel based routes, each with 10.4 wt % Co₃O₄ loading, yielded three different nanocomposite morphologies: CeO₂-supported Co₃O₄ layers, intermixed oxides, and homogeneously dispersed Co. The reactivity of the resulting surface oxygen species towards CO were examined by temperature programmed reduction (CO-TPR) and flow reactor kinetic tests. The first morphology exhibited the best performance due to its active Co₃O₄ surface layer, reducing the light-off temperature of CeO₂ by about 200 °C. In contrast, intermixed oxides and Co-doped CeO₂ suffered from lower dispersion and organic residues, respectively. The performance of Co₃O₄-CeO₂ nanocomposites was optimized by varying the Co₃O₄ loading, characterized by X-ray diffraction (XRD) and N₂ sorption (BET). The 16–65 wt % Co₃O₄−CeO₂ catalysts approached the conversion of 1 wt % Pt/CeO₂, rendering them interesting candidates for low-temperature CO oxidation.     

Acoustic radiation from a fluid-filled, subsurface vascular tube with internal turbulent flow due to a constriction

The vibration of a thin-walled cylindrical, compliant viscoelastic tube with internal turbulent flow due to an axisymmetric constriction is studied theoretically and experimentally. Vibration of the tube is considered with internal fluid coupling only, and with coupling to internal-flowing fluid and external stagnant fluid or external tissue-like viscoelastic material. The theoretical analysis includes the adaptation of a model for turbulence in the internal fluid and its vibratory excitation of and interaction with the tube wall and surrounding viscoelastic medium. Analytical predictions are compared with experimental measurements conducted on a flow model system using laser Doppler vibrometry to measure tube vibration and the vibration of the surrounding viscoelastic medium. Fluid pressure within the tube was measured with miniature hydrophones. Discrepancies between theory and experiment, as well as the coupled nature of the fluid-structure interaction, are described. This study is relevant to and may lead to further insight into the patency and mechanisms of vascular failure, as well as diagnostic techniques utilizing noninvasive acoustic measurements.     

Polyamide 6‐polycaprolactone multiblock copolymers: Synthesis,characterization, and degradation

This work describes the synthesis and characterization of polyamide 6 (PA 6)‐polycaprolactone (PCL) multiblock copolymers. Low molar mass, fully amine end‐capped PA 6 was prepared by the addition of a diamine monomer during ε‐caprolactam polymerization. A low molar mass PCL was selected to be incorporated as the biodegradable block and was fully end‐capped with toluene 2,4‐diisocyanate. End group analysis and molecular weight characterizations were performed for both end‐functionalized polymers by SEC, NMR and titration analysis. Incorporation of PCL into PA 6 was mainly achieved by solution mixing of the two end‐functional blocks and, was continued after the removal of the solvent with solid state polymerization (SSP) by gradual heating until about 40 °C below the melting temperature of the PA 6. Molecular weights started to grow immediately during solution mixing and only increased marginally during the SSP treatment. FTIR and SEC studies confirmed the reaction between the two components. DSC data, in combination with the enhanced molar mass during solution mixing pointed to a blocky microstructure, for which distinct melting and crystallization temperatures were observed for the PCL and the PA 6 blocks. Hydrolytic and enzymatic degradation studies were performed at 25 °C where the degree of degradation was followed by weight loss analysis, SEM and SEC. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Linear and Nonlinear Optical Properties in Spherical Quantum Dots

We calculate the energy eigenvalues and the sate functions of one-electron Quantum Dot （QD） by using a combination of Quantum Genetic Algorithm （QGA） and Hartre-Fock-Roothaan （HFR） method. The linear and the third-order nonlinear optical absorption coefficients for the 1s-1p, 1p-1d, and 1d-1f transitions are examined as a function of the incident photon energy for three different values of the stoichiometric ratio. The results show that the stoichiometric ratio, impurity, relaxation time, and dot size have great influence on the optical absorption coefficients of QDs.     

SERS-based sandwich immunoassay using antibody coated magnetic nanoparticles for Escherichia coli enumeration

A method combining immunomagnetic separation (IMS) and surface-enhanced Raman scattering (SERS) was developed to enumerate Escherichia coli (E. coli). Gold-coated magnetic spherical nanoparticles were prepared by immobilizing biotin-labeled anti-E. coli antibodies onto avidin-coated magnetic nanoparticles and used in the separation and concentration of the E. coli cells. Raman labels have been constructed using rod shaped gold nanoparticles coated with 5,5-dithiobis-(2-nitrobenzoic acid) (DTNB) and subsequently with a molecular recognizer. Then DTNB-labeled gold nanorods were interacted with gold-coated magnetic spherical nanoparticle-antibody-E. coli complex. The capture efficiency and calibration graphs were obtained and examined in different E. coli concentrations (10(1)-10(7) cfu mL(-1)). The correlation between the concentration of bacteria and SERS signal was found to be linear within the range of 10(1)-10(4) cfu mL(-1) (R(2) = 0.992). The limit of detection (LOD) and limit of quantification (LOQ) values of the developed method were found to be 8 and 24 cfu mL(-1), respectively. The selectivity of the developed immunoassay was examined with Enterobacter aerogenes, Enterobacter dissolvens, and Salmonella enteriditis which did not produce any significant response. The ability of the immunoassay to detect E. coli in real water samples was also investigated and the results were compared with the experimental results from plate-counting methods. There was no significant difference between the methods that were compared (p > 0.05). This method is rapid and sensitive to target organisms with a total analysis time of less than 70 min.