Rapid Biosynthesis of Silver Nanoparticles Using Areca Nut (Areca catechu) Extract Under Microwave-Assistance

In this research paper, we report on the rapid synthesis of silver nanoparticles using dried areca nut (Areca catechu). The microwave exposed aqueous areca nut powder when treated with the aqueous silver salt solution yielded irregular shaped silver nanoparticles. The formation and morphology of the nanoparticles are studied using UV–visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy. The X-ray diffraction studies and energy dispersive X-ray analysis indicate that the particles are crystalline in nature. The understanding of capping of biological moiety is derived from Fourier transform infrared spectroscopy and the thermogravimetric analysis. The green chemistry approach for the synthesis of silver nanoparticles is modest, amenable for large scale commercial production. Further the biologically synthesized silver nanoparticles are known for their potential antibacterial activity.     

A Multifunctional Subphthalocyanine Nanosphere for Targeting,Labeling, and Killing of Antibiotic‐Resistant Bacteria

Developing a material that can combat antibiotic‐resistant bacteria, a major global health threat, is an urgent requirement. To tackle this challenge, we synthesized a multifunctional subphthalocyanine (SubPc) polymer nanosphere that has the ability to target, label, and photoinactivate antibiotic‐resistant bacteria in a single treatment with more than 99 % efficiency, even with a dose as low as 4.2 J cm⁻² and a loading concentration of 10 nM . The positively charged nanosphere shell composed of covalently linked SubPc units can increase the local concentration of photosensitizers at therapeutic sites. The nanosphere shows superior performance compared to corresponding monomers presumably because of their enhanced water dispersibility, higher efficiency of singlet‐oxygen generation, and phototoxicity. In addition, this material is useful in fluorescence labeling of living cells and shows promise in photoacoustic imaging of bacteria in vivo.     

Renner-Teller and Fermi resonance interactions for the v3=1 and v7=2 vibronic levels in the A2Πu and X2Πg electronic states of HC4H+

The excitation of the v(3) = 1 (σ(g)(+) C-C stretch) and the v(7) = 2 (π(g)(2) C≡C-C bend) modes in the A(2)Π(u) electronic state of diacetylene cations results in Renner-Teller (R-T) and Fermi interactions. The 3(0)(1) and 7(0)(2) vibronic bands in the A(2)Π(u)-X(2)Π(g) transition of HC(4)H(+) have been measured with rotational resolution using cavity ringdown spectroscopy in a supersonic slit jet discharge. The analysis yields T(00) = 20520.828(4) cm(-1), B' = 0.14047(2) cm(-1), and A' = -17.95(1) cm(-1) for the v(3) = 1 and T(00) = 20573.659(4) cm(-1), B' = 0.14018(3) cm(-1), and A' = -11.55(1) cm(-1) for the v(7) = 2 level in the A(2)Π(u) electronic state. A vibronic analysis has been carried out taking into consideration the R-T, spin-orbit, and Fermi resonance interactions between the ν(3) and ν(7) modes. The levels are fitted to the eigenvalues of an appropriate Hamiltonian matrix. This yields the vibrational frequencies ω(3)′ = 811.8 cm(-1) and ω(7)′ = 403.2 cm(-1), Renner parameter ε(7)′ = 0.065, Fermi coefficients W(1)′ = 10.3 cm(-1) and W(2)′ = 5.1 cm(-1), and spin-orbit interaction constant A(SO)′ = -31.1 cm(-1). A corresponding R-T analysis has been carried out for the X(2)Π(g) ground state of HC(4)H(+) using data available in the literature [Callomon, J. H. Can. J. Phys. 1956, 34, 1046]. This gives ω(3)" = 956.2 cm(-1), ω(7)" = 435.4 cm(-1), ε(7)" = 0.028, W(1)" = 7.2 cm(-1), W(2)" = 10.9 cm(-1), and A(SO)" = -33.3 cm(-1).     

Synthesis of Graphene and Its Applications: A Review

Graphene, one-atom-thick planar sheet of carbon atoms densely packed in a honeycomb crystal lattice, has grabbed appreciable attention due to its exceptional electronic and optoelectronic properties. The reported properties and applications of this two-dimensional form of carbon structure have opened up new opportunities for the future devices and systems. Although graphene is known as one of the best electronic materials, synthesizing single sheet of graphene has been less explored. This review article aims to present an overview of the advancement of research in graphene, in the area of synthesis, properties and applications, such as field emission, sensors, electronics, and energy. Wherever applicable, the limitations of present knowledgebase and future research directions have also been highlighted.     

Bis(2‐but­yl‐N,N′‐diisopropyl­amidinato)dichloro­hafnium(IV)

The title compound, [Hf(C₁₁H₂₃N₂)₂Cl₂], is a monomeric hafnium(IV) complex containing two bidentate amidinate ligands and two cis Cl atoms. The crystals are triclinic (space group ) and there is one independent six‐coordinate monomer with a highly distorted octa­hedral geometry in the asymmetric unit. The reported structure is the first hafnium–amidinate complex to be characterized successfully by single‐crystal X‐ray diffraction.     

Flow and breakup characteristics of elliptical liquid jets

This paper presents the results of an experimental study on liquid jets discharging from elliptical orifices into still ambient air. The experiments were conducted with a set of elliptical orifices of approximately same area of cross section but varying orifice aspect ratio using water and water–glycerol mixture as experimental fluids. The flow behavior of liquid jets was analyzed using their photographs captured by an imaging system. The measurements obtained for the elliptical liquid jets were compared with the circular liquid jets discharging from a circular orifice of the same area of cross section. Elliptical geometry of the orifice results in a flow process by which the emanating liquid jet periodically switches its major and minor axes as it flows downstream of the orifice. In this paper, we attempt to characterize the axis-switching process through its wavelength and amplitude. For a given elliptical orifice, the axis-switching process is dominantly seen in a particular range of flow conditions. The effects of the orifice aspect ratio and liquid viscosity on the axis-switching process are revealed through this study. The experimental results on jet breakup show that axis-switching process has a destabilizing effect on elliptical liquid jets within a particular range of flow conditions and it results in shorter breakup lengths compared to the circular jet. The extent to which axis-switching destabilizes the jet is dictated by the viscosity of liquid. An increase in orifice aspect ratio destabilizes elliptical liquid jets with low viscosity like water; however, this behavior seems to get obscured in water–glycerol mixture elliptical jets due to high viscosity.     

Highly Efficient Non‐Palladium‐Catalyzed Controlled Synthesis and X‐ray Analysis of Functionalized 1,2‐Diaryl‐, 1,2,3‐Triaryl‐, and 1,2,3,4‐Tetraarylbenzenes

A general, two‐step, highly efficient synthesis of 1,2‐diaryl‐, 1,2,3‐triaryl‐, and 1,2,3,4‐tetraarylbenzenes from simple stitching of α‐oxo‐ketene‐S,S‐acetals and active methylene compounds via a lactone intermediate is described. This procedure offers easy access to highly functionalized arylated benzenes that contain sterically demanding groups in good to excellent yields. The novelty of the procedure lies in the construction of aromatic compounds with the desired conformational flexibility along the molecular axis in a transition‐metal‐free environment through easily accessible precursors. Crystal analysis of these arylated benzene scaffolds showed that the peripheral aryl rings are arranged in a propeller‐like fashion with respect to the central benzene ring. Examination of the crystal packing in the structure of a 1,2,3,4‐tetraarylbenzene revealed an N???π interaction between molecules related by a two‐fold screw axis running in the direction of the a axis. Interestingly, the repeating array of N???π interactions around the axis of this 1,2,3,4‐tetraarylbenzene forces the molecules into a helical pattern.     

Synthesis, characterisation, and DC conductivity of polyaniline-lead oxide composites

The polyaniline-PbO composites of various mass fractions were prepared by in situ polymerisation. The prepared samples were characterised by FTIR, and the dominant peaks confirmed the formation of polyaniline-PbO composites. The SEM study shows a granular agglomerated morphology, and increases with an increase in the lead oxide mass % in polyaniline. Direct current (DC) conductivity (σ _DC) was studied as a function of temperature (T). From these studies, it was found that conductivity increased at higher temperatures due to the polarons hopping from one localised state to another. DSC studies reveal, the decrease in peak temperature from 273°C (pure PANI) to 169.2°C, 193.5°C, 218.4°C, 235.2°C, and 224.2°C, respectively for the various mass fractions (10 %, 30 %, 20 %, 40 %, and 50 %) of polyaniline-PbO composites.     

Electronic spectra of C<Subscript>6</Subscript>H<Superscript>+</Superscript> and C<Subscript>6</Subscript>H<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> in the gas phase

Measurement of the ³Π-³Π transition of C₆H⁺ in the gas phase near 19486 cm⁻¹ is reported. The experiment was carried out with a supersonic slit-jet expansion discharge using cavity ringdown absorption spectroscopy. Partly resolved P lines and observation of band heads permitted a rotational contour fit. Spectroscopic constants in the ground and excited-state were determined. The density of ions being sampled is merely 2×10⁸ cm⁻³. Broadening of the spectral lines indicates the excited-state lifetime to be ≈100 ps. The electronic transition of HC₆H₂⁺ at 26402 cm⁻¹ assumed to be ¹A₁-X¹A₁ in C_2v symmetry could not be rotationally resolved.     

Guanidinate-stabilized monomeric hafnium amide complexes as promising precursors for MOCVD of HfO2

Novel guanidinato complexes of hafnium [Hf{eta2-(iPrN)2CNR2}2(NR2)2] (R2 = Et2, 1; Et, Me, 2; Me2, 3), synthesized by insertion reactions of N,N'-diisopropylcarbodiimide into the M-N bonds of homologous hafnium amide complexes 1-3 and {[mu2-NC(NMe2)2][NC(NMe2)2]2HfCl}2 (4) using a salt metathesis reaction, are reported. Single-crystal X-ray diffraction analysis revealed that compounds 1-3 were monomers, while compound 4 was found to be a dimer. The observed fluxional behavior of compounds 1-3 was studied in detail using variable-temperature and two-dimensional NMR techniques. The thermal characteristics of compounds 1-3 seem promising for HfO2 thin films by vapor deposition techniques. Metal-organic chemical vapor deposition experiments with compound 2 as the precursor resulted in smooth, uniform, and stoichiometric HfO2 thin films at relatively low deposition temperatures. The basic properties of HfO2 thin films were characterized in some detail.