Treatment of Pea Seeds with Plasma Activated Water to Enhance Germination,Plant Growth,and Plant Composition

Plasma Chemistry and Plasma Processing - The present study has been carried to investigate the interaction and effect of plasma activated water (PAW) on pea seeds. PAW is produced with the...     

Thermal analysis of polysiloxanes, aromatic polyimide and their blends

Low molecular weight poly(dimethylsiloxane) and poly(methylphenylsiloxane) were synthesized and blended with polyimide (PI) at its precursor poly(amic acid) stage. FTIR analysis has proven the retention of polysiloxanes in polyimide after the ultimate curing of blends. Differential scanning calorimetric analysis was performed on polysiloxanes to elucidate the structures present in polymers while thermogravimetric analysis (TGA) was performed on polysiloxanes, polyimide as well as their blends to evaluate the thermal stability and to analyze the effect of polysiloxane incorporation in blends. Blends have shown synergistic improvement as compared to neat polyimide.     

Extraction of ketamine from urine using a miniature silica monolithic cartridge followed by quantification with liquid chromatography tandem mass spectrometry (LC-MS/MS)

The high surface area monolith with reactive hydroxyl group on its surface enables it to function as a miniature solid‐phase extraction (SPE) cartridge in size of 1 cm in diameter and 0.5 cm in length. The prepared silica monolith was characterized by Brunauer–Emmett–Teller method, scanning electron microscopy, X‐ray diffraction and Fourier transform infrared (FTIR) spectroscopy. Ketamine was selected as model analyte to validate the extraction efficiency of the prepared cartridge. The extracted ketamine from urine sample was quantitated by liquid chromatography tandem mass spectrometry (LC‐MS/MS) using positive electrospray ionization. The limit of detection and quantification for ketamine was found to be 0.5 and 1.6 ng/mL, respectively. The analysis exhibited linearity in the range of 10–500 ng/mL with coefficient of correlation >0.99. The recovery was found to be in the range of 89–107% with relative standard deviation (RSD) less than 10%. The prepared cartridge was found robust in extracting ketamine efficiently and repeatedly without any significant deterioration in its performance. Moreover, the batch‐to‐batch variations in the performance of the prepared cartridges in terms of % ion suppression of the extracts and recoveries of samples were small, suggesting the consistency in the properties of the monolith.     

Clustering student skill set profiles in a unit hypercube using mixtures of multivariate betas

This paper presents a finite mixture of multivariate betas as a new model-based clustering method tailored to applications where the feature space is constrained to the unit hypercube. The mixture component densities are taken to be conditionally independent, univariate unimodal beta densities (from the subclass of reparameterized beta densities given by Bagnato and Punzo in Comput Stat 28(4):10.1007/s00180-012-367-4, 2013). The EM algorithm used to fit this mixture is discussed in detail, and results from both this beta mixture model and the more standard Gaussian model-based clustering are presented for simulated skill mastery data from a common cognitive diagnosis model and for real data from the Assistment System online mathematics tutor (Feng et al. in J User Model User Adap Inter 19(3):243–266, 2009). The multivariate beta mixture appears to outperform the standard Gaussian model-based clustering approach, as would be expected on the constrained space. Fewer components are selected (by BIC-ICL) in the beta mixture than in the Gaussian mixture, and the resulting clusters seem more reasonable and interpretable.     

Oxatriquinane and oxatriquinacene: extraordinary oxonium ions

Oxatriquinane, a fused, tricyclic alkyl oxonium ion of unprecented stability, was synthesized in five steps from 1,4,7-cyclononatriene. It survives reflux in H2O, chromatography, and attack by alcohols, alkyl thiols, halide ions, and hindered amine bases. The X-ray crystal structure shows longer C-O bond distances and more acute C-O-C bond angles than any reported alkyloxonium salt. The corresponding oxatriquinene and oxatriquinacene were also synthesized and represent the first examples of stable allyl oxonium species.     

Hybrid approach combining chemometrics and likelihood ratio framework for reporting the evidential value of spectra

Many chemometric tools are invaluable and have proven effective in data mining and substantial dimensionality reduction of highly multivariate data. This becomes vital for interpreting various physicochemical data due to rapid development of advanced analytical techniques, delivering much information in a single measurement run. This concerns especially spectra, which are frequently used as the subject of comparative analysis in e.g. forensic sciences. In the presented study the microtraces collected from the scenarios of hit-and-run accidents were analysed. Plastic containers and automotive plastics (e.g. bumpers, headlamp lenses) were subjected to Fourier transform infrared spectrometry and car paints were analysed using Raman spectroscopy. In the forensic context analytical results must be interpreted and reported according to the standards of the interpretation schemes acknowledged in forensic sciences using the likelihood ratio approach. However, for proper construction of LR models for highly multivariate data, such as spectra, chemometric tools must be employed for substantial data compression. Conversion from classical feature representation to distance representation was proposed for revealing hidden data peculiarities and linear discriminant analysis was further applied for minimising the within-sample variability while maximising the between-sample variability. Both techniques enabled substantial reduction of data dimensionality. Univariate and multivariate likelihood ratio models were proposed for such data. It was shown that the combination of chemometric tools and the likelihood ratio approach is capable of solving the comparison problem of highly multivariate and correlated data after proper extraction of the most relevant features and variance information hidden in the data structure.     

Thermally stable polymers based on addition-type imidobenzoxazoles; synthesis and characterization of polybismaleimidobenzoxazoles and polybiscitraconimidobenzoxazoles

Four structurally different bisimidobenzoxazole monomers were synthesized, based on the reaction of two isomeric diaminobenzoxazoles, viz., 5-amino-2-(p-aminophenyl) benzoxazole and 5-amino-2-(m-aminophenyl) benzoxazole with maleic and citraconic anhydrides. The diamines were synthesized by a new route. The imides and the amic intermediates were characterized by elemental analysis, IR, NMR, and mass spectra. The imides could be thermally polymerized to crosslinked brittle polybisimidobenzoxazoles. The citraconimides polymerized at a lower temperature than the maleimide. Thermal stability of the cured resins was evaluated by TGA and was correlated to the structure of the polyimide. The polybismaleimidobenzoxazoles were stable up to about 500°C in N₂, leaving 50–60% anaerobic char yield at 800°C, whereas polybiscitraconimidobenzoxazoles were stable up to 420°C. Comparison of the thermal behavior of similar polyimides based on oxydianiline revealed that incorporation of benzoxazole structure enhances the decomposition temperature, lowers the rate of decomposition, and enhances the anaerobic char yield at high temperature. Addition of diamines as chain-extending agents decreased the thermal stability of the resins without any change in the anaerobic char yield.     

Polyimide-epoxy alloys prepared via micro-modification: Water sorption and diffusion

A novel polyimide-epoxy or PI-EP alloys are prepared by the modification of polyamic acid in the concentration range of 1.54×10⁻⁶ to 1.54×10⁻² mol/L. The methanol sorption for these alloys at 24 hrs and at equilibrium conditions are determined and the residual solvent in fully cyclized polyimides were calculated. The presence of the residual solvent is visualized in fully imidized polymer and a structure containing partly imidized amic acid moiety is proposed and their concentration (in percentage) is calculated. The water sorption for these alloys at 24 hrs and at equilibrium conditions and the values of the water diffusion coefficient are determined from absorption isotherms. The PI-EP alloys have shown comparatively lower water sorption and higher diffusion coefficient than the unmodified polyimide. The mechanistic aspects of water sorption and diffusion are discussed.     

Surface modification of Angora rabbit fibers using dielectric barrier discharge

Dielectric barrier discharge (DBD) of Helium and Helium + air modify the surface of Angora rabbit fibers. DBD treatment carried out at different power densities, changes the morphology and chemical composition of the surface of Angora fiber. Scanning electron microscopy (SEM) results reveal that the DBD treatment eliminates fibrosity from the fiber surface. X-ray photoelectron spectroscopy and Fourier transform infrared spectrometer (FTIR) spectrum confirm the increase in oxygen bonding at the surface. These changes reduce shedding of the fibers and improve dye-uptake property. However, even after 10 min of plasma exposure the thermal insulation (heat keeping ratio) of Angora fibers nearly remain unchanged. It has been noticed that DBD treatment (10 min) reduces whiteness of the fiber.     

Hypervalent organobismuth(iii) carbonate, chalcogenides and halides with the pendant arm ligands 2-(Me2NCH2)C6H4 and 2,6-(Me2NCH2)2C6H3

R2BiOH (1) [R = 2-(Me2NCH2)C6H4] and (R2Bi)2O (2) are formed by hydrolysis of R2BiCl with KOH. Single crystals of were obtained by air oxidation of (R2Bi)2. The reaction of R2BiCl and Na2CO3 leads to (R2Bi)2CO3 (3). 3 is also formed by the absorption of CO2 from the air in solutions of 1 or 2 in diethyl ether or toluene. (R2Bi)2S (4) is obtained from R2BiCl and Na2S or from (R2Bi)2 and S8. Exchange reactions between R2BiCl and KBr or NaI give R2BiX [X = Br (5), I (6)]. The reaction of RBiCl2 (7) with Na2S and [W(CO)5(THF)] gives cyclo-(RBiS)2[W(CO)5]2 (8). cyclo-(R'BiS)2 (9) [R' = 2,6-(Me2NCH2)2C6H3] is formed by reaction of R'BiCl2 and Na2S. The structures of were determined by single-crystal X-ray diffraction.