Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.     

Light-driven molecular motors: stepwise thermal helix inversion during unidirectional rotation of sterically overcrowded biphenanthrylidenes

To investigate the unidirectional rotation of chiral overcrowded biphenanthrylidenes in more detail, the size of the substituent next to the double bond responsible for the unidirectionality of rotation was varied. The thermal and photochemical isomerization of three sterically overcrowded alkenes is described. The behavior of the biphenanthrylidenes with methyl and ethyl substituents is rather similar, and these compounds undergo a unidirectional 360 degrees rotation around the central double bond in a four-step sequence involving two photochemical cis-trans isomerizations and two thermal helix inversions. The only difference between these two true molecular motors was a small entropic effect, which causes the ethyl substituted molecular motor to rotate slightly faster. The behavior of the i-propyl substituted compound differs significantly from that of the other two. Although not all different isomers of the i-propyl substituted molecular motor were detected spectroscopically, experimental data led to the conclusion that this compound can also be considered as a molecular motor and is capable of performing a 360 degrees unidirectional rotation. (1)H NMR and X-ray analysis show a meso-like form as an intermediate in the unidirectional rotation, which proves that the thermal helix inversion is a stepwise process.     

Carbon skeletal rearrangements in 2-phenylthiophene and 2,5-diphenylthiophene under conditions of electron-impact

The mass spectra of ¹³C-labelled 2-phenylthiophenes and 2,5-diphenylthiophenes were studied. The label distributions for the [HCS]⁺, [C₂H₂S]^+·, [C₈H₆]^+·, [C₉H₇]⁺ and [C₇H₅]S⁺ ions from 2-phenylthiophene and the [HCS]⁺, [C₉H₇]⁺, [C₇H₅S]^+·, and [C₁₅H₁₁]⁺ ions from 2,5-diphenylthiophene were interpreted in terms of both carbon skeletal rearrangements in the thiophene ring and migration of the phenyl substituent. The degree of carbon scrambling in the thiophene ring appeared to be almost independent of the electron beam energy. The formation of some of the fragment ions studied seems to be so fast that no carbon scrambling could be detected at all; in neither case was complete scrambling of the carbon atoms of the thiophene ring observed.     

Ring expansion and hydrogen scrambling in the molecular ion of 3-methylthiophene

The ratio [M ? D]/{[M-D] + [M ? H]} in the 70 eV mass spectra of six deuterated 3-methylthiophenes has been determined. From these values the mole fractions of the molecular ions that lose hydrogen atoms specifically from the various positions of the molecule were calculated, as well as the mole fraction in which the hydrogen atoms are fully scrambled before hydrogen elimination. It appears that hydrogen atoms are mainly lost from a fully scrambled [C₅H₆S]⁺· ion and from the α-position of the original molecular ion. A deuterium isotope effect of 1·60 to 1·72 was calculated for the hydrogen elimination. The reaction was also studied at low electron energies. In order to determine the degree of scrambling in the [C₅H₅S]⁺ ions, some decomposition reactions of this ion were investigated.     

A chiroptical molecular switch with perfect stereocontrol

A modified version of the first generation unidirectional molecular motor showed >99% stereoselectivity in photo-induced isomerizations in both directions, thus functioning as a perfect chiroptical molecular switch.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

Gas chromatography-mass spectrometry as a tool for estimating odour concentrations of biofilter effluents at aerobic composting and rendering plants

The relationship between chemical concentrations (gas chromatography–mass spectrometry analysis) and odour concentrations (olfactometry) was studied for biofilter emissions from four aerobic vegetable, fruit and garden waste (VFG) composting plants and one animal rendering plant. For the VFG composting plants, the study revealed a good linear relationship of the odour concentration with the total volatile organic compounds (VOC) concentration (R²=0.97, n=16) as well as with the concentration of esters and ketones (R²=0.9, n=19). For biofilter emissions of the animal rendering plant, the total VOC concentration was a poor estimator for odour concentration. However, for this type of odour, concentrations of organic sulphur containing compounds correlated well with odour concentrations (R²=0.94, n=8). The results of the study also showed that the relationship between chemical and odour concentrations is specific for each type of odour and cannot be generalized.     

Degradation of cellulosic key chromophores by ozone: a mechanistic and kinetic study

Cellulose - Chromophores, colored substances of rather high stability that reduce brightness, are present in all kinds of cellulosic products, such as pulp, fibers, aged cellulosic material, and...