Experimental investigation on the thermophysical properties of beryllium oxide-based nanofluid and nano-enhanced phase change material

Journal of Thermal Analysis and Calorimetry - Low thermal conductivity is a primary issue in the development of efficient heat transfer fluids and materials required for the thermal management of...     

A biological process for the reclamation of flue gas desulfurization gypsum using mixed sulfate-reducing bacteria with inexpensive carbon sources

A combined chemical and biological process for the recycling of flue gas desulfurization (FGD) gypsum into calcium carbonate and elemental sulfur is demonstrated. In this process, a mixed culture of sulfate-reducing bacteria (SRB) utilizes inexpensive carbon sources, such as sewage digest or synthesis gas, to reduce FGD gypsum to hydrogen sulfide. The sulfide is then oxidized to elemental sulfur via reaction with ferric sulfate, and accumulating calcium ions are precipitated as calcium carbonate using carbon dioxide. Employing anaerobically digested municipal sewage sludge (AD-MSS) medium as a carbon source, SRBs in serum bottles demonstrated an FGD gypsum reduction rate of 8 mg/L/h (10⁹ cells)^-1. A chemostat with continuous addition of both AD-MSS media and gypsum exhibited sulfate reduction rates as high as 1.3 kg FGD gypsum/m³d. The increased biocatalyst density afforded by cell immobilization in a columnar reactor allowed a productivity of 152 mg SO₄ ^-2/Lh or 6.6 kg FGD gypsum/m³d. Both reactors demonstrated 100% conversion of sulfate, with 75–100% recovery of elemental sulfur and chemical oxygen demand utilization as high as 70%. Calcium carbonate was recovered from the reactor effluent on precipitation using carbon dioxide. It was demonstrated that SRBs may also use synthesis gas (CO, H₂, and CO₂ in the reduction of gypsum, further decreasing process costs. The formation of two marketable products—elemental sulfur and calcium carbonate—from FGD gypsum sludge, combined with the use of a low-cost carbon source and further improvements in reactor design, promises to offer an attractive alternative to the landfilling of FGD gypsum.

     

Superconvergence error estimates of discontinuous Galerkin time stepping for singularly perturbed parabolic problems

Numerical Algorithms - A parabolic convection-diffusion-reaction problem is discretized by the non-symmetric interior penalty Galerkin (NIPG) method in space and discontinuous Galerkin (DG) method...     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.     

SYNTHESIS,NMR AND MOLECULAR MODELING STUDY OF 4,9a-DIARYL-9,9a-DIHYDRO 1H-[1,4]THIAZINO[4,3-a][1,3]BENZIMIDAZOLES

A series of substituted 4,9a-diaryl-9,9a-dihydro-1H-[1,4]thiazino[4,3-a][1,3]benzimidazoles was prepared in good yields from the reaction of bis(aroylmethyl) sulfides with ortho-phenylenediamine in glacial acetic acid under reflux and under microwave irradiation. Microwave irradiation is found to accelerate the reaction, besides giving better yield in the case of the thiazinobenzimidazoles with electron-withdrawing groups in the aryl rings than the thermal reaction.     

DIASTEREOSELECTIVE SYNTHESIS AND STEREOCHEMISTRY OF (Z)-1-[3-ARYL-2-(PHENYLSULFANYL)-2-OXIRANYL]-1-ETHANONES

Diastereoselective synthesis of a series of (Z)-1-[3-aryl-2-(phenylsulfanyl)-2-oxiranyl]-1-ethanones was effected from the reaction of (Z)-4-aryl-3-(phenylsulfanyl)-3-buten-2-ones with alkaline hydrogen peroxide in tetrahydrofuran. The stereochemistry of the oxiranes has been deduced from two-dimensional NOESY spectrum.     

Identification of potential HIV-1 integrase strand transfer inhibitors: In silico virtual screening and QM/MM docking studies

HIV-1 integrase (IN) is a retroviral enzyme that catalyses integration of the reverse-transcribed viral DNA into the host genome, which is necessary for efficient viral replication. In this study, we have performed an in silico virtual screening for the identification of potential HIV-1 IN strand transfer (ST) inhibitors. Pharmacophore modelling and atom-based 3D-QSAR studies were carried out for a series of compounds belonging to 3-Hydroxypyrimidine-2,4-diones. Based on the ligand-based pharmacophore model, we obtained a five-point pharmacophore with two hydrogen bond acceptors (A), one hydrogen bond donor (D), one hydrophobic group (H) and one aromatic ring (R) as pharmacophoric features. The pharmacophore hypothesis AADHR was used as a 3D query in a sequential virtual screening study to filter small molecule databases Maybridge, ChemBridge and Asinex. Hits matching with pharmacophore hypothesis AADHR were retrieved and passed progressively through Lipinski’s rule of five filtering, molecular docking and hierarchical clustering. The five compounds with best hits with novel and diverse chemotypes were subjected to QM/MM docking, which showed improved docking accuracy. We further performed molecular dynamics simulation and found three compounds that form stable interactions with key residues. These compounds could be used as a leads for further drug development and rational design of HIV-1 IN inhibitors.