Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

Synchrotron radiation total reflection X-ray fluorescence (SR-TXRF) for evaluation of food contamination

Summary The objective of this study was to use synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF) for the determination of metals and other elements in food available to the population in commercial establishments, in order to evaluate the risks of contamination by these products. The analyzed species were vegetables, leafy vegetables, fruits, cereal and grain. The results indicated that some species were contaminated by Cr, Cu, Zn and Pb with concentrations much higher than the reference values.     

Enhancing molecular formation in a Rb-MOT

In this paper, we report observation of an enhancement of the ground state molecule Rb₂ formation in a Rb magneto-optical trap due to a photoassociation laser. Such an enhancement effect is due to flux enhancement of atomic pairs at short internuclear distances. Our experimental observations consist in the measurement of the molecular formation rate constant due to a probe laser as a function of the trap laser intensity. The results are compared with a simple semi-classical model, showing good agreement. We conclude that the production of cold Rb₂ may be enhanced using appropriate laser parameters; this may be useful for future experiments involving production and trapping of ultracold ground state molecules.     

Integrated lot-sizing and one-dimensional cutting stock problem with usable leftovers

This paper addresses the integration of the lot-sizing problem and the one-dimensional cutting stock problem with usable leftovers (LSP-CSPUL). This integration aims to minimize the cost of cutting items from objects available in stock, allowing the bringing forward production of items that have known demands in a future planning horizon. The generation of leftovers, that will be used to cut future items, is also allowed and these leftovers are not considered waste in the current period. Inventory costs for items and leftovers are also considered. A mathematical model for the LSP-CSPUL is proposed to represent this problem and an approach, using the simplex method with column generation, is proposed to solve the linear relaxation of this model. A heuristic procedure, based on a relax-and-fix strategy, was also proposed to find integer solutions. Computational tests were performed and the results show the contributions of the proposed mathematical model, as well as, the quality of the solutions obtained using the proposed method.

     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

New Factorial Designs to Evaluate Chemisorption of Divalent Metals on Aminated Silicas

Adsorption processes of Cu(II), Co(II), and Hg(II) on two aminated silica gel surfaces with immobilized ethylenediamine and diethylenediamine groups were studied by a new 2(3) full factorial design. Two metal quantity levels, temperatures of 25 and 50 degrees C, and silica amounts of 100 and 200 mg were employed. Our study indicates that higher factorial design levels increase adsorption for all metals evaluated, with the exception of the mass parameter. Adsorption is also significantly affected by important antagonistic and synergistic effects involving all factors. Both functionalized silica gel surfaces present higher interactions and good perspectives in preconcentration studies for mercury. The factorial design results are also discussed in terms of some solvation properties for each of the metals studied. Copyright 2001 Academic Press.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Utilization of Agro-Industrial Residues in the Rearing and Nutritional Enrichment of Zophobas atratus Larvae: New Food Raw Materials

Edible insects are a potential alternative food source of high feed conversion efficiency and protein content. Zophobas atratus is an edible insect that adapts to different diets, enabling sustainable rearing by adding value to by-products and agro-industrial residues. This study aimed to evaluate the performance and nutritional characterization of Zophobas atratus larvae fed with different proportions of grape residue. Physicochemical analysis of the diets and larvae (AOAC procedures), fatty acid profile (chromatographic techniques), metals and non-metals (inductively coupled plasma optical emission spectrometry), larval mass gain, feed conversion efficiency, and mortality rate were assessed. The replacement of 25% of the conventional diet with grape residue increased lipid, ash, and fiber contents and reduced protein, carbohydrates, and energy. It promoted greater mass gain, lower mortality rate, and reduced larval growth time by 51%. Among the replacements, 25% resulted in the second-highest content of calcium, sodium, magnesium, and zinc, and the lowest content of potassium and phosphorus in the larvae. The 100% replacement resulted in the highest amounts of C18:2n6 (27.8%), C18:3n3 (2.2%), and PUFA (30.0%). Replacing 25% of the conventional diet with grape residue is equivalent to the conventional diet in many aspects and improves several larvae performance indices and nutritional values.     

Electron Spin Resonance Dosimetry Studies of Irradiated Sulfite Salts

The study of new materials for radiation dosimetry is important to improve the present state of the art and to help in cases of accidents for retrospective dosimetry. Sulfites are compounds that contain a sulfur ion, widely used in the food industry. Due to the significant application of these compounds, sulfites are interesting candidates for accidental dosimetry, as fortuitous radiation detectors. The presence of the SO₃⁻ anion enables its detection by electron spin resonance (ESR) spectroscopy. The Dose–Response behavior, signal stability and other spectral features were investigated for sodium sulfite, sodium bisulfite, sodium metabisulfite and potassium metabisulfite, all in crystalline forms. The ESR spectrum of salts presented stability and proportional response with dose, presenting potential for dosimetry applications.     

Evaluation of Genotoxicity and Toxicity of Annona muricata L. Seeds and In Silico Studies

Cancer is a multifactorial organic dysfunction for which great efforts are being devoted in searching for new treatments and therapeutic adjuvants. Annona muricata is a fruit that has promising activity against several types of cancer, as it contains acetogenins, the metabolite group associated with this action. Thus, the objective of this study was to evaluate, in experimental models, the toxic behavior of an extract and fraction rich in acetogenins from A. muricata seeds and study the acetogenin, Annonacin, in silico. Phytochemical characterization was made by thin layer chromatography, spectroscopy in the infrared region and nuclear magnetic resonance. Toxicity was evaluated by tests of Allium cepa and Artemia salina, and in silico studies using the SwissDock servers DockThor, PharmMapper, ADMETLab, PreADME, Osiris and ProTox. The extract and fraction showed genotoxic activity against meristematic cells of A. cepa, reducing the mitotic index; however, the extract produced great deleterious effects on the system, even causing cell necrosis. In A. Saline, the extract was more toxic than the fraction, but both samples were considered toxic. Annonacin was effectively linked to complex I, and presented different activities regarding toxicity. Thus, the results of this study are promising, highlighting the anticancer potential of acetogenins.