Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Metal components analysis of metallothionein-III in the brain sections of metallothionein-I and metallothionein-II null mice exposed to mercury vapor with HPLC/ICP-MS

Mercury vapor is effectively absorbed via inhalation and easily passes through the blood–brain barrier; therefore, mercury poisoning with primarily central nervous system symptoms occurs. Metallothionein (MT) is a cysteine-rich metal-binding protein and plays a protective role in heavy-metal poisoning and it is associated with the metabolism of trace elements. Two MT isoforms, MT-I and MT-II, are expressed coordinately in all mammalian tissues, whereas MT-III is a brain-specific member of the MT family. MT-III binds zinc and copper physiologically and is seemed to have important neurophysiological and neuromodulatory functions. The MT functions and metal components of MTs in the brain after mercury vapor exposure are of much interest; however, until now they have not been fully examined. In this study, the influences of the lack of MT-I and MT-II on mercury accumulation in the brain and the changes of zinc and copper concentrations and metal components of MTs were examined after mercury vapor exposure by using MT-I, II null mice and 129/Sv (wild-type) mice as experimental animals. MT-I, II null mice and wild-type mice were exposed to mercury vapor or an air stream for 2 h and were killed 24 h later. The brain was dissected into the cerebral cortex, the cerebellum, and the hippocampus. The concentrations of mercury in each brain section were determined by cold vapor atomic absorption spectrometry. The concentrations of mercury, copper, and zinc in each brain section were determined by inductively coupled plasma mass spectrometry (ICP-MS). The mercury accumulated in brains after mercury vapor exposure for MT-I, II null mice and wild-type mice. The mercury levels of MT-I, II null mice in each brain section were significantly higher than those of wild-type mice after mercury vapor exposure. A significant change of zinc concentrations with the following mercury vapor exposure for MT-I, II null mice was observed only in the cerebellum analyzed by two-way analysis of variance. As for zinc, the copper concentrations only changed significantly in the cerebellum. Metal components of metal-binding proteins of soluble fractions in the brain sections were analyzed by size-exclusion high-performance liquid chromatography (HPLC) connected with ICP-MS. From the results of HPLC/ICP-MS analyses, it was concluded that the mercury components of MT-III and high molecular weight metal-binding proteins in the cerebellum of MT-I, II null mice were much higher than those of wild-type mice. It was suggested that MT-III is associated with the storage of mercury in conditions lacking MT-I, and MT-II. It was also suggested that the physiological role of MT-III and some kind of high molecular weight proteins might be impaired by exposure to mercury vapor and lack of MT-I and MT-II.     

Sensitive determination of anandamide in rat brain utilizing a coupled-column HPLC with fluorimetric detection

A fluorimetric determination method for N-arachidonoylethanolamine (anandamide) was developed using a precolumn fluorescence derivatization followed by coupled-column high-performance liquid chromatography (HPLC). Anandamide extracted from the rat brain tissue was derivatized with 4-N-chloroformylmethyl-N-methylamino-7-N, N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl), purified by a solid-phase extraction (Emporetrade mark), and assayed by the coupled-column HPLC. The HPLC consisted of phenyl (100 x 4.6 mm i.d. ) and octadecylsilica columns (250 x 4.6 mm i.d.), both connected by a six-port valve. The concentration of anandamide in rat brain was 3. 37 +/- 0.73 pmol/g with 6.47 and 3.57% of intra- and inter-day precisions, respectively. Using this method, we investigated the alteration of anandamide concentration in rat brain 30 min after administration of anandamide (2 mg/kg, i.p.) to rats pretreated with or without phenylmethylsulfonyl fluoride (PMSF; 30 mg/kg, i.p.), an inhibitor of amidohydrolase. In rats pretreated with PMSF, the brain concentration of anandamide was approx. 16-fold higher than that of rats without PMSF (p < 0.01).     

Electron spin resonance studies on radiation graft copolymerization in polyethylene. II. Grafting initiated by allyl radicals trapped in irradiated polyethylene

The regions trapping allyl radicals in irradiated polyethylene and the reactivity of the radicals with various monomers have been studied by electron spin resonance. Most of the allyl radicals are trapped in defects or surfaces of the crystallite, and only 10% of the radicals are trapped inside the crystallites. Since the reactivity of the allyl radicals depends on whether they come in contact with reactive monomers, the rate of reaction is related to the concentration of the monomers. When grafting reactions are initiated by allyl radicals, the rate of initiation is rapid and the rate of termination at the initial stage is also very fast. Consequently the yield of grafting increases at the initial stage but soon levels off, which is in contrast to the grafting behavior with alkyl radicals.     

Reactions of protoberberine-type alkaloids—XI : Synthesis of optically active ochotensanes

Treatment of l(14S)-β-canadine methochloride (1b) and d(14R)-β-canadine methochloride (1c) with organometals gave d- (2b) and l-2,3-methylenedioxy-9,10-dimethoxyochotensanes (2c), respectively. The structures of these derivatives were proved by chemical and spectral means. The CD spectra of 2b showed Davydov split extrema centered at 284 nm with a positive first Cotton effect, while 2c showed the antipodal curve of 2b. Consequently, the absolute configurations of 2b and 2c were concluded the 14R and 14S, respectively.Application of the anionic rearrangement to N-methyltharictricavine chloride (15) led to 2,3 - methylenedioxy - 9,10 - dimethoxy - 13 - methylochotensane (18) together with the Hofmann methines 16 and 17. The stereochemistry of 18 was confirmed in terms of the nuclear Overhauser effects.     

A new biodegradable polydepsipeptide microsphere for application in drug delivery systems

A sequential polydepsipeptide containing a tripeptide sequence L-alanyl-Lalanyl-ethyl L-glutamyl and an-hydroxy acid L-lactic acid, poly(Ala-Ala-Glu(OEt)-Lac), was synthesized to prepare the microspherical particles by the solvent evaporation process. In this case, the solvents play the most important role for the preparation of polydepsipeptide microspheres and, as an example, when 200 mg of the polydepsipeptide dissolved in 10 ml of 98/2% chloroform/dichloroacetic acid mixture was stirred at 400 rpm and 30 C, the microspherical particles with mean diameter of 58m were formed after pouring into 200 ml of 1% (w/v) poly(vinyl alcohol) solution. 17-Estradiol was incorporated into the particles, and the resulting particles were found to contain 5 mg of drug per 25 mg of the particle. The in vivo release of drug from the microspherical formulation was evaluated by measuring the pharmacological influence on rat prostate. It was found that the sufficient amount of drug, keeping the effective pharmacological influence, is supplied during the first 12-week period, followed by an incomplete supplying of drug intil the implant is perfectly degraded in vivo in the 25th week from the start of implantation.     

Fluorescence modification of Gb3 oligosaccharide and rapid synthesis of oligosaccharide moieties using fluorous protective group

The use of the bisfluorous chain-type propanoyl (Bfp) group as a fluorous protective group made it possible to rapidly synthesize the Gb2 and Gb3 oligosaccharide derivatives by a simple fluorous-organic extraction purification. Furthermore, the fluorescence-labeled Gb2 and Gb3 oligosaccharides were prepared as a potential Vero Toxins detecting reagent.