Study on crystalline properties of Er-Si-O compounds in relation to Er-related 1.54 μm photoluminescence and electrical properties

Er-Si-O crystalline compounds, which exhibit superlattice structures and sharp and strong Er-related 1.54 μm photoluminescence (PL) spectra at room temperature have been formed by self-assembling growth mechanism. Oxidation of the starting materials which have Si and Er at an atomic ratio of 2:1 are prepared and then oxidation and succeeding high-temperature annealing in Ar above 1250 °C cause a self-assembled superlattice-structured Er-Si-O crystalline compounds. The control of the ratio of Si and Er, as well as the following oxidation and annealing processes, is found to be sensitive to the crystalline properties, PL spectra and electrical properties. In this study, Er-Si-O crystalline thin films are formed on Si substrates by sol-gel and MOMBE methods, and their crystalline properties such as crystalline orientation and concentration ratio of Er, Si and O are investigated. Crystalline Er-Si-O films of high orientation are successfully grown on Si(1 0 0) and its inclined surface. The PL and excitation spectra, fluorescence decay and the electrical properties are found to be strongly related to the crystalline properties. Excess O causes a broader 1.54 μm PL spectra, slower fluorescence decay, lower carrier-mediated excitation and higher resistivity. A precise control of O is found to be necessary to grow superlattice-structured Er-Si-O compounds, which are semiconducting and are excitable via carrier-mediated excitation mechanism.     

Complex impedance spectra of chip inductor using Li–Zn–Cu–Mn ferrite

A multi-layer chip inductor (MCI) was fabricated using polycrystalline Li–Zn–Cu–Mn ferrite and the green-sheet technique, and its complex impedance spectrum was evaluated with the help of numerical calculations. The complex impedance spectra of the MCI component using Ni–Zn–Cu ferrite, which have been widely used for this application, were very sensitive to the residual stress and deviated much from the calculated values; however, it was found that the complex impedance spectrum of the MCI component using Li–Zn–Cu–Mn ferrite is quite well reproduced by calculation, where the complex permittivity and permeability of the polycrystalline ferrite as well as the MCI dimensions, were used. It implied that the magneto-striction effect was negligible in case of MCI using Li–Zn–Cu–Mn ferrite, and that the difference was related to magneto-strictive coefficient of the polycrystalline ferrite. Consequently, utilization of Li–Zn–Cu–Mn ferrite enabled us to easily design the complex impedance of MCI component.     

Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

Microwave-resonance-induced resistivity: evidence of ultrahot surface-state electrons on liquid 3He

Measurements of the dc resistivity of surface-state electrons on liquid helium exposed to microwave radiation are reported. It is shown that the resonant microwave excitation of surface-state electrons is accompanied by a strong increase in their resistivity, which is opposite to the result expected from the previously used two-level model. We show that even a very small fraction of electrons excited to the first excited state and decaying back due to vapor-atom scattering strongly heat the electron system, causing a population of higher subbands. The calculated resistivity change is in good agreement with the observed data.     

Mechanical and dynamic aspects of voice production as related to voice therapy and phonosurgery

Laryngeal framework surgery can change the position and tensionof the vocal folds safely without direct surgical intervention in the vocal fold proper. Some 23 years of experience with phonosurgery have proved its usefulness in treating dysphonia related to unilateral vocal fold paralysis, vocal fold atrophy, and pitch-related dysphonias. Meanwhile, much information about the mechanism of voice production has been obtained through intraoperative findings of voice and fiberscopic examination of the larynx . Based on such knowledge together with information obtained through model experiments, the human vocal organ was reconsidered mainly from the mechanical view point, and the roles of voice therapy and singing pedagogy were discussed in relation to phonosurgery. The vocal organ may not be an ideal musical organ and is rather vulnerable, but its potential is enormous.     

Optical absorption of Cu-centers in CdCl2 and CdBr2 single crystals

The absorption spectra of CdCl₂ and CdBr₂ single crystals doped with cuprous or cupric halides were measured. Optical bleaching of the absorption bands due to Cu⁺ gives rise to new absorption bands which suggest the conversion of Cu⁺→Cu²⁺. This was confirmed also by detecting the growth in ESR signals characteristic of Cu²⁺ centers.     

金/钯双金属纳米颗粒协同催化酰胺和醇间氢自转移反应中路易斯酸驱动反应路径

金属纳米颗粒,特别是金和它的双金属纳米颗粒作为强大的绿色催化剂广泛用于有机合成反应中。在一个反应体系中使用2个不同催化剂(如协同催化),在均相催化中是一个很好的策略。然而,这种方法仍在发展中。最近我们发现,金/钯双金属纳米颗粒与路易斯酸的协同催化体系可用于伯胺的N-烷基化：即酰胺与醇之间的氢自转移反应。我们详细报道了路易斯酸对该氢自转移反应的影响。结果表明,所选的路易斯酸不仅影响生成目标产物的反应路径,而且影响生成多个中间体和副产物的反应路径。弱的路易斯酸,如三氟甲磺酸碱土金属盐,非常适合酰胺的N-烷基化反应。     

Microstructure, microhardness, composition, and corrosive properties of stainless steel 304 I. Laser surface alloying with silicon by beam-oscillating method.

Laser surface alloying (LSA) with silicon was conducted on austenitic stainless steel 304. Silicon slurry composed of silicon particle of 5 μm in average diameter was made and a uniform layer was supplied on the substrate stainless steel. The surface was melted with beam-oscillated carbon dioxide laser and then LSA layers of 0.4–1.2 mm in thickness were obtained. When an impinged energy density was adjusted to be equal to or lower than 100 W mm⁻², LSA layers retained rapidly solidified microstructure with dispersed cracks. In these samples, Fe₃Si was detected and the concentration of Si in LSA layer was estimated to be 10.5 wt.% maximum. When the energy density was equal to or greater than 147 W mm⁻², cellular grained structure with no crack was formed. No iron silicate was observed and alpha iron content in LSA layers increased. Si concentration within LSA layers was estimated to be 5 to 9 wt.% on average. Crack-free as-deposited samples exhibited no distinct corrosion resistance. The segregation of Si was confirmed along the grain boundaries and inside the grains. The microstructure of these samples changed with solution-annealing and the corrosion resistance was fairly improved with the time period of solution-annealing. Received: 2 September 1999 / Accepted: 6 September 1999 / Published online: 1 March 2000     

Reactions of 26-iodopseudodiosgenin and 26-iodopseudodiosgenone with various nucleophiles and pharmacological activities of the products

26-Iodopseudodiosgenin (8) and 26-iodopseudodiosgenone (9) were reacted with various nucleophiles (KSCN, KOCN, NaCN, NaN(3) and various amines) to give pseudodiosgenin derivatives (4, 12, 16-20, 26) and pseudodiosgenone derivatives (5, 13, 21-25, 27), respectively. The reactions of 8 and 9 with KOCN gave the elimination products (10) and (11), respectively. The reaction of 9 with NaCN gave 5alpha,26- (14) and 5beta,26-dicyanocholestan-3-one (15). The reaction of 8 with NaN3 gave triazepine derivative (30), while that of 9 gave 26-azidopseudodiosgenone (31). Compound 31 was converted into triazepine derivative (32) by heating at 120 degrees C. The cytotoxicity of the pseudodiosgenins and pseudodiosgenones on P-gp-underexpressing HCT 116 cells and P-gp-overexpressing Hep G2 cells was examined by MTT assay. Pseudodiosgenins 2, 4, 12 and 30 showed strong cytotoxic activity (IC50 values: 2.6+/-0.3-6.7+/-1.4 microM), as did pseudodiosgenones 3, 5, 11, 13, 21-25 and 27 (IC50 values: 1.3+/-0.3-6.4+/-0.3 microM) toward HCT 116 cells. Pseudodiosgenins 12, 16 and 30 (IC50 values: 1.2+/-0.7-2.2+/-0.6 microM) and pseudodiosgenones 22, 23, 25 and 27 (IC50 values: 0.6+/-0.1-2.5+/-0.3 microM) were highly cytotoxic to Hep G2 cells. Compounds 3 and 27 showed efficient antibacterial activity (MIC: 15.6, 10.4 microg/ml) and (MIC: 7.8, 15.6 microg/ml) against Bacillus subtilis and Staphylococcus aureus, respectively.