Effect of Protective Measures on Eye Exposure to Solar Ultraviolet Radiation

In this study, ocular biologically effective exposure to solar ultraviolet radiation (UVBE) is investigated with six kinds of sun protective measures (spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol). Ocular UV exposure measurements were performed on manikins during the summer period in Shenyang city (41.64° N, 123.50° E, 66 m a.s.l.), China. The measurements include the ocular UV exposure of an unprotected eye and the ambient UV as a control concurrently. Based on the relative spectral weighting factors of the International Commission on Non‐Ionizing Radiation Protection (ICNIRP), the ocular biologically effective UV is calculated and compared with the 8‐h exposure limits of ICNIRP (30 J m^?2). The UV index (UVI) of the measurement days is 0–8, and the 8‐h (8:00–16:00 China Standard Time, CST) cumulated UVBE of the unprotected eye is 452.0 J m^?2. The 8‐h cumulated UVBE of the eye with spectacle lenses, sunglasses, cap, bonnet, straw hat and under parasol are 364.2, 69.1, 51.4, 49.0, 56.8 and 110.2 J m^?2, respectively. Importantly, it should be noted that the eye could be exposed to risk despite protective measures. The 8‐h cumulated UVBE of the eye with protection is ca 1.6–15.1 times the exposure limit, respectively. As indicated in the present study, during summer months, high exposure to the sun for more than 30 min without eye protection and more than 1 h with eye protection is not advisable. The protection measures could effectively reduce the UVBE reaching the eye, yet there is still a high degree of risk when compared with the ICNIRP 8‐h exposure limits.     

Design,Synthesis, and Biological Activity of New Bis-1,2,3-triazole Derivatives Bearing Thiophene-Chalcone Moiety

Russian Journal of General Chemistry - A series of novel 1,4-substituted bis-aralkyl and aryl 1,2,3-triazoles bearing thiophene chalcones are synthesized via the Claisen condensation of bis...     

1,5-Benzothiazepine Derivatives: Green Synthesis,In Silico and In Vitro Evaluation as Anticancer Agents

Considering the importance of benzothiazepine pharmacophore, an attempt was carried out to synthesize novel 1,5-benzothiazepine derivatives using polyethylene glycol-400 (PEG-400)-mediated pathways. Initially, different chalcones were synthesized and then subjected to a cyclization step with benzothiazepine in the presence of bleaching clay and PEG-400. PEG-400-mediated synthesis resulted in a yield of more than 95% in less than an hour of reaction time. Synthesized compounds 2a–2j were investigated for their in vitro cytotoxic activity. Moreover, the same compounds were subjected to systematic in silico screening for the identification of target proteins such as human adenosine kinase, glycogen synthase kinase-3β, and human mitogen-activated protein kinase 1. The compounds showed promising results in cytotoxicity assays; among the tested compounds, 2c showed the most potent cytotoxic activity in the liver cancer cell line Hep G-2, with an IC₅₀ of 3.29 ± 0.15 µM, whereas the standard drug IC₅₀ was 4.68 ± 0.17 µM. In the prostate cancer cell line DU-145, the compounds displayed IC₅₀ ranges of 15.42 ± 0.16 to 41.34 ± 0.12 µM, while the standard drug had an IC₅₀ of 21.96 ± 0.15 µM. In terms of structural insights, the halogenated phenyl substitution on the second position of benzothiazepine was found to significantly improve the biological activity. This characteristic feature is supported by the binding patterns on the selected target proteins in docking simulations. In this study, 1,5-benzothiazepines have been identified as potential anticancer agents which can be further exploited for the development of more potent derivatives.     

Synthesis, characterization, and photocatalytic properties of surface-modified, silver-doped ZnO

Hydrothermal synthesis of silver-doped modified ZnO was carried out in the presence of a surface modifier. The experimental conditions were maintained constant (ZnO = 4 M; T = 250 °C; P = autogenous; Solvent = 1 N HCl; Duration = 24 h). Caprylic acid was used as a surface modifier with varying concentration from 0.1 to 2 mL. The experiments were carried out with Ag doping from 1 to 5 wt%. Hydrophobic silver-doped ZnO modified with caprylic acid was subjected to a systematic characterization using powder XRD, SEM, FTIR, and photocatalytic properties using Indigo Carmine dye.     

Novel solution routes of synthesis of metal oxide and hybrid metal oxide nanocrystals

Novel solution routes covering a wide range of processes like hydrothermal, solvothermal and supercritical techniques have been described in detail with reference to the processing of a wide range of advanced inorganic nanocrystalline materials and organic-inorganic hybrid nanocrystalline materials. The significance of the thermochemical calculations, in situ surface modification and the experimental parameters has been discussed. One step in situ fabrication of advanced functional nanocrystalline materials by soft solution processing has also been discussed briefly. Synthesis of nanocrystals of metal oxides and hybrid nanocrystals and also processing several nanocomposites like carbon nanotubes: metal oxide, activated carbon: metal oxide, etc. has been reviewed in relation to various process parameters. The effect of doping, size, shape and quality on the properties of nanocrystalline materials has been discussed in relation to the photoluminescence and photocatalytic characteristics.     

Surface modification and grafting of carbon fibers: A route to better interface

This review is an audit of various Carbon fibers (CF) surface modification techniques that have been attempted and which produced results with an enhancement in the interfacial characteristics of CFRP systems. An introduction to the CF surface morphology, various techniques of modifications, their results and challenges are discussed here. CFs are emerging as the most promising materials for designing many technologically significant materials for current and future generations. In order to extract all the physic-mechanical properties of CF, it is essential to modulate a suitable environment through which good interfacial relation is achieved between the CF and the matrix. The interface has the utmost significance in composites and hybrid materials since tension at the interface can result in a deterioration of the fundamental properties. This review is aimed to provide a detailed understanding of the CF structure, its possible ways of modification, and the influence of interfacial compatibility in physic-mechanical and tribological properties. Both physical and chemical modifications are illustrated with specific examples, in addition to the characterization methods. Overall, this article provides key information about the CF based composite fabrication and their many applications in aerospace and electronics- where light weight and excellent mechanical strength are required.     

Vapor phase synthesis of tungsten nanowires

A concept is presented for synthesizing metal nanowires directly from the vapor phase using chemical vapor transport to temperatures higher than the corresponding metal oxide decomposition temperature. Specifically, this concept is demonstrated with the synthesis of tungsten metal nanowires with sizes ranging from 70 to 40 nm by increasing the condensation temperature. The simultaneous condensation and decomposition of the tungsten oxide species during nucleation and growth is suggested for 1-D growth of metallic tungsten nanowires. This synthesis concept could potentially be extended to the vapor phase synthesis of metal nanowires of several other nonvolatile and refractory metals. The tungsten nanowires could find potential applications in gas sensors and as electron sources in electron microscopes.     

Enhancement of the photocatalytic activity of modified ZnO nanoparticles with manganese additive

ZnO nanoparticles were synthesized under mild hydrothermal conditions (T = 150 °C, P = autogenous, experimental duration = 18 h). Manganese was added as an additive to ZnO nanoparticles in different molar percentages. In situ surface-modification was successfully carried out for these manganese-added ZnO nanoparticles using n-butylamine as a surface modifier. The modified manganese-added ZnO nanoparticulates are hydrophilic in nature and are well dispersed in various solvents. The modified nanoparticles were characterized using powder XRD, FTIR, SEM, Zeta potential, and UV?CVis spectrophotometry. The characterization results indicated tailoring of the morphology and size of the nanoparticles, and changing the surface chemistry of the nanoparticles synthesized. The SEM results show that the surface modified manganese-added ZnO nanoparticles have a very thin layer of organic coverage around the inorganic nanoparticles, thus, giving rise to hybrid nanoparticles. The photodegradation of Brilliant Blue dye under sunlight showed the higher efficiency of the modified manganese-doped ZnO nanoparticles compared to the reagent-grade ZnO.     

Novel oxadiazole functionalized pyridopyrimidine derivatives; their anticancer activity and molecular docking studies

A series of novel oxadiazole functionalized pyridopyrimidine derivatives prepared starting from 6-methyl/ethyl-2-oxo-4-(trifluoromethyl)-1,2-dihydropyridine-3-carbonitrile 1 . This compound 1 on reaction with sulfuric acid obtained compound 2 , further compound 2 on reaction with chloroacetamide followed by reaction with ethoxy methylene malonic diethyl ester coupling and further cyclization to obtain compound 5 . Compound 5 on reaction with hydrazide hydrate obtained hydrazide derivatives 6 . Compound 6 on reaction with diverse substituted aromatic acids to get oxadiazole derivatives 7a–l . All the final compounds 7a–l evaluated for anticancer activity against four human cancer cell lines such as HeLa—cervical cancer (CCL-2); COLO 205—colon cancer (CCL-222); HepG2—liver cancer (HB-8065); and MCF7—breast cancer (HTB-22) and promising compounds 7d and 7k have been identified and evaluated for molecular docking interactions.