Colorimetric and fluorescence sensing of fluoride anions with potential salicylaldimine based schiff base receptors

Salicylaldimine based schiff base receptors with different substituents showing fluorescent enhancement in the presence of fluoride anion was visualized through naked eye as well as by change in spectral properties (UV–vis and fluorescent techniques). The reason for such fluorescence enhancement may be due to hydrogen bond interaction between receptor recognition site and fluoride anion. Such a hydrogen bond interaction creates a six-membered transition state, which avoids quenching processes. To support this, fluorescence enhancement factor (FEF) was calculated and it was found to be more (FEF = 652) for –NO₂ substituted receptor compared to other receptors.     

Chiral ligand derived from (1S,2R)-norephedrine as a catalyst for enantioselective prochiral ketone reduction

Chiral oxazaborolidines derived from (1S,2R)-(+)-norephedrine and substituted salicylaldehydes were employed in the asymmetric reduction of prochiral ketones using borane dimethyl sulfide as a reducing agent. The secondary alcohols were formed in excellent yields (45–99.8%) with enantioselectivities up to 99.8%. The effect of the substitution in the aromatic ring of the ligand was discussed with the enantioselectivity of the product.     

Structural,thermal and electrical properties of polyvinyl alcohol/poly(vinyl pyrrolidone)–sodium nitrate solid polymer blend electrolyte

Sodium ion conducting solid polymer blend electrolyte thin films have been prepared by using polyvinyl alcohol (PVA)/poly(vinyl pyrrolidone) (PVP) with NaNO₃ by solution cast technique. The prepared films were characterized by various methods. The complexation of the salt with the polymer blend was identified by X-ray diffraction (XRD) and Fourier transforms infrared spectroscopy (FTIR), Differential scanning calorimetry was used to analyze the thermal behavior of the samples, and the glass transition temperature is low for the highest conducting polymer material. The scanning electron microscopy gives the surface morphology of the polymer electrolytes. The frequency and temperature dependent of electrical conductivities of the films were studied using impedance analyzer in the frequency range of 1 Hz to 1 MHz. The highest electrical conductivity of 50PVA/50PVP/2 wt% NaNO₃ concentration has been found to be 1.25 × 10^?5 S cm^?1 at room temperature. The electrical permittivity of the polymer films have been studied for various temperatures. The transference number measurements showed that the charge transport is mainly due to ions than electrons. Using this highest conducting polymer electrolyte, an electrochemical cell is fabricated and the parameters of the cells are tabulated.     

Formulation of Naringin Encapsulation in Zein/Caseinate Biopolymers and its Anti-adipogenic Activity in 3T3-L1 Pre-adipocytes

Journal of Cluster Science - Naringin, a dietary flavonoid of citrus fruits, was encapsulated in biodegradable proteins of zein/casein biopolymers for its enhanced functional properties. The...     

Tensile,thermal, and antibacterial characterization of composites of cellulose/modified Pennisetum purpureum natural fibers with in situ generated copper nanoparticles

Eco-friendly all cellulose composites were developed using cellulose as matrix and nanocomposite (in situ generated copper nanoparticles modified Napier Grass Fibers (NGFs)) as fillers for the antibacterial applications. The content of the nanocomposite filler was increased from 1?wt.% to 5?wt.% in the cellulose matrix. All these composites were characterized by Scanning Electron Microscopy (SEM), Tensile, Thermo Gravimetric Analysis (TGA), and antibacterial tests. SEM-EDX analysis revealed the in situ generation of copper nanoparticles on the surface of the films. Further, all cellulose composites showed good thermal stability. A minimum of 30% increase in char residue was observed in all cellulose nanocomposites compared to matrix. Antibacterial analysis indicated an excellent clear zone formation against both Gram Negative (Escherichia coli) and Gram Positive (Staphylococcus) bacteria. Hence, all these cellulose nanocomposite films can be considered as antibacterial packaging and dressing materials in medical field.     

Preparation and Characterization of Chiral Oxazaborolidine Complex Immobilized SBA‐15 and Its Application in the Asymmetric Reduction of Prochiral Ketones

The immobilization of chiral oxazaborolidine complex in the well‐ordered mesochannels of SBA‐15 is demonstrated by a postsynthetic approach using 3‐aminopropyltriethoxysilane as a reactive surface modifier. The immobilized catalysts are characterized by various techniques, such as XRD, nitrogen adsorption, HRSEM, UV/Vis diffuse reflectance spectroscopy, and FTIR spectroscopy. The catalysts are used for the enantioselective reduction of aromatic prochiral ketones. The activity of the chiral oxazaborolidine complex immobilized SBA‐15 catalysts is also compared with that of the pure chiral oxazaborolidine complex, which is a homogeneous catalyst. It is found that the activity of the chiral complex immobilized SBA‐15 heterogeneous catalyst is comparable with that of the homogeneous catalyst.     

Preparation and characterization of nanocrystalline CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> deposited on SiO<Subscript>2</Subscript>: in situ sol–gel process

In situ base catalyst assisted sol–gel process is used for the synthesis of nanocrystalline CoFe₂O₄ deposition on SiO₂ particles. The SiO₂ particles were prepared using base catalyst assisted sol–gel process and the consecutive formation and deposition of nanocrystalline CoFe₂O₄ on SiO₂ particles was monitored using Powder X ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Thermo Gravimetric And Differential Thermal Analysis (TG/DTA), Scanning Electron Microscopy and Energy Dispersive X ray Spectroscopy (SEM–EDS) and High Resolution Transmission Electron Microscopy (HRTEM). The crystallite size of CoFe₂O₄ is calculated using Scherrer’s formula and it is found to be 8 nm. The HRTEM images and selective area electron diffraction (SAED) results confirmed the formation of nanocrystalline CoFe₂O₄ particles deposited over SiO₂ spheres.     

Structural characterization and electrical conductivity studies of BaMoO4 nanofibers prepared by sol–gel and electrospinning techniques

Scheelite type BaMoO₄ nanofibers were prepared by using acrylamide assisted sol–gel process and electrospinning technique. The prepared Scheelite BaMoO₄ nanofibers were characterized by using TG/DTA, XRD, FTIR, FT-Raman and SEM–EDX techniques. Thermal behavior, crystalline phase and structure of the prepared BaMoO₄ nanofibers samples were confirmed from the analysis of the obtained results of TG/DTA, XRD, FTIR and FT-Raman respectively. SEM micrographs along with EDX showed the formation of one dimensional (1D) nanofibers 100–350 nm diameters and existence of Ba, Mo and O elements in the BaMoO₄ nanofibers sample. The electrical conductivity of BaMoO₄ nanofibers as a function of temperature 200–400 °C under air was evaluated by analyzing the measured impedance data using the winfit software. The newly prepared Scheelite type BaMoO₄ nanofibers showed electrical conductivity of 0.92 × 10^?3 S/cm at 400 °C.     

Immobilization of chiral oxazaborolidine catalyst over highly ordered 3D mesoporous silica with Ia3d symmetry for enantioselective reduction of prochiral ketone

Here we demonstrate for the first time the encapsulation of a chiral oxazaborolidine complex in the 3D mesoporous channels of an amine functionalized KIT-6 material via covalent bonding through a post-synthetic approach. The physico-chemical properties of the pure and immobilized KIT-6 catalysts were obtained by various techniques such as XRD, nitrogen adsorption, HRSEM, UV-Vis diffuse reflectance spectroscopy, and FT-IR spectroscopy. It has been found that the structural stability of the KIT-6 was not affected even after the immobilization of a significant amount of chiral ligand inside the mesoporous channels of the support. However, the values of structural parameters such as the specific surface area and the specific pore volume of the KIT-6 support was significantly lower than the pure KIT-6 support. The chemical interaction between the chiral ligand inside the mesochannels and the KIT-6 support was also confirmed by UV-Vis and FT-IR spectroscopy. The chiral catalytic performance of the immobilized catalysts for the enantioselective reduction of aromatic prochiral ketones was demonstrated and the results were compared with chiral catalyst immobilized supports with uni-dimensional porous structures, such as MCM-41 and SBA-15. Among the catalysts studied, chiral catalyst immobilized KIT-6 showed the highest performance with a high product yield and a high enantioselectivity due to its 3D porous structure with two continuous and interpenetrating systems of chiral channels and an interwoven 3D cylindrical type pores of Ia3d symmetry. The catalyst also exhibited much better recycling capability than other chiral catalyst supported mesoporous materials used in the study.     

Bubbly jets in stagnant water

Air–water bubbly jets are studied experimentally in a relatively large water tank with a gas volume fraction, C_o, of up to 80% and nozzle Reynolds number, Re, ranging from 3500 to 17,700. Measurements of bubble properties and mean axial water velocity are obtained and two groups of experiments are identified, one with relatively uniform bubble sizes and another with large and irregular bubbles. For the first group, dimensionless relationships are obtained to describe bubble properties and mean liquid flow structure as functions of C_o and Re. Measurements of bubble slip velocity and estimates of the drag coefficient are also provided and compared to those for isolated bubbles from the literature. The study confirms the importance of bubble interactions to the dynamics of bubbly flows. Bubble breakup processes are also investigated for bubbly jets. It was found that a nozzle Reynolds number larger than 8000 is needed to cause breakup of larger bubbles into smaller bubbles and to produce a more uniform bubble size distribution. Moreover, the Weber number based on the mean water velocity appears to be a better criteria than the Weber number based on the bubble slip velocity to describe the onset of bubble breakup away from the nozzle, which occurs at a Weber number larger than 25.