Iridium-catalyzed hydrogenation of N-heterocyclic compounds under mild conditions by an outer-sphere pathway

A new homogeneous iridium catalyst gives hydrogenation of quinolines under unprecedentedly mild conditions-as low as 1 atm of H(2) and 25 °C. We report air- and moisture-stable iridium(I) NHC catalyst precursors that are active for reduction of a wide variety of quinolines having functionalities at the 2-, 6-, and 8- positions. A combined experimental and theoretical study has elucidated the mechanism of this reaction. DFT studies on a model Ir complex show that a conventional inner-sphere mechanism is disfavored relative to an unusual stepwise outer-sphere mechanism involving sequential proton and hydride transfer. All intermediates in this proposed mechanism have been isolated or spectroscopically characterized, including two new iridium(III) hydrides and a notable cationic iridium(III) dihydrogen dihydride complex. DFT calculations on full systems establish the coordination geometry of these iridium hydrides, while stoichiometric and catalytic experiments with the isolated complexes provide evidence for the mechanistic proposal. The proposed mechanism explains why the catalytic reaction is slower for unhindered substrates and why small changes in the ligand set drastically alter catalyst activity.     

Thiocyanate linkage isomerism in a ruthenium polypyridyl complex

Ruthenium polypyridyl complexes have seen extensive use in solar energy applications. One of the most efficient dye-sensitized solar cells produced to date employs the dye-sensitizer N719, a ruthenium polypyridyl thiocyanate complex. Thiocyanate complexes are typically present as an inseparable mixture of N-bound and S-bound linkage isomers. Here we report the synthesis of a new complex, [Ru(terpy)(tbbpy)SCN][SbF(6)] (terpy = 2,2';6',2'-terpyridine, tbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine), as a mixture of N-bound and S-bound thiocyanate linkage isomers that can be separated based on their relative solubility in ethanol. Both isomers have been characterized spectroscopically and by X-ray crystallography. At elevated temperatures the isomers equilibrate, the product being significantly enriched in the more thermodynamically stable N-bound form. Density functional theory analysis supports our experimental observation that the N-bound isomer is thermodynamically preferred, and provides insight into the isomerization mechanism.     

Mechanochemical Formation,Solution Rearrangements,and Catalytic Behavior of a Polymorphic Ca/K Allyl Complex

Without solvents present, the often far-from-equilibrium environment in a mechanochemically driven synthesis can generate high-energy, non-stoichiometric products not observed from the same ratio of reagents used in solution. Ball milling 2 equiv. K[A’] (A’=[1,3-(SiMe₃)₂C₃H₃]⁻) with CaI₂ yields a non-stoichiometric calciate, K[CaA’₃], which initially forms a structure ( 1 ) likely containing a mixture of pi- and sigma-bound allyl ligands. Dissolved in arenes, the compound rearranges over the course of several days to a structure ( 2 ) with only η³-bound allyl ligands, and that can be crystallized as a coordination polymer. If dissolved in alkanes, however, the rearrangement of 1 to 2 occurs within minutes. The structures of 1 and 2 have been modeled with DFT calculations, and 2 initiates the anionic polymerization of methyl methacrylate and isoprene; for the latter, under the mildest conditions yet reported for a heavy Group 2 species (one-atm pressure and room temperature).     

An η3‐Bound Allyl Ligand on Magnesium in a Mechanochemically Generated Mg/K Allyl Complex

Milling two equivalents of K[1,3‐(SiMe₃)₂C₃H₃] (=K[A′]) with MgX₂ (X=Cl, Br) produces the allyl complex [K₂MgA′₄] ( 1 ). Crystals grown from toluene are of the solvated species [((η⁶‐tol)K)₂MgA′₄] ([ 1 ?2(tol)]), a trimetallic monomer with both bridging and terminal (η¹) allyl ligands. When recrystallized from hexanes, the unsolvated 1 forms a 2D coordination polymer, in which the Mg is surrounded by three allyl ligands. The C?C bond lengths differ by only 0.028 Å, indicating virtually complete electron delocalization. This is an unprecedented coordination mode for an allyl ligand bound to Mg. DFT calculations indicate that in isolation, an η³‐allyl configuration on Mg is energetically preferred over the η¹‐ (σ‐bonded) arrangement, but the Mg must be in a low coordination environment for it to be experimentally realized. Methyl methacrylate is effectively polymerized by 1 , with activities that are comparable to K[A′] and greater than the homometallic magnesium complex [{MgA′₂}₂].     

Capillary scale monolithic trap column for desalting and preconcentration of peptides and proteins in one- and two-dimensional separations

Monolithic columns based on poly-(styrene-divinylbenzene) (PS-DVB) were utilized both for preconcentration (in 10 mm x 0.20 mm I.D. format) and analytical separation (in 60 mm x 0.20 and 0.10 mm I.D. format) of peptides and proteins in column switching micro-scale high-performance liquid chromatography. A special holder for short monolithic preconcentration columns was designed and pressure durability tests approved long-term stability up to 400 bar. An 11-20% decrease in the average peak widths of nine peptides was obtained upon combining a preconcentration column with an analytical column as compared with a setup using an analytical column only. Trapping efficiency, especially for small and hydrophilic peptides, was optimized by using 0.10% heptafluorobutyric acid instead of 0.050% trifluoroacetic acid as solvent additive during sample loading. Using a 10 mm x 0.20 mm I.D. preconcentration column, loadabilities between 0.5 and 1.6 microg were determined by frontal analysis of proteins and bioactive peptides, respectively. A 100-fold concentration followed by direct on-line intact mass determination is demonstrated for diluted (3 micromolL(-1)) protein solutions. The applicability of the monolithic preconcentration column for multidimensional chromatography was tested by off-line two-dimensional separation, combining strong cation-exchange chromatography and ion-pair reversed-phase chromatography. Peptide identification data from digested protein mixtures demonstrated reproducibilities of 46-75% in triplicate analyses, and confident peptide identifications of low abundant peptides even in the presence of a 650-fold molar excess of high abundant peptides.     

含油岩心显微荧光成像光谱研究

发展了一种显微荧光光谱成像技术,并将其应用于天然岩心进行显微荧光成像光谱研究。利用这种技术同时采集含油岩心表面的荧光光谱信息和空间信息．并对获得的光谱图像给予光谱学和地质学解释。结果表明,不但能显示岩心形貌和组分的大致趋势,而且能揭示其精细细节．为石油地质研究提供了一种新方法,为今后的石油勘探开发工作提供了一种先进的指导手段。     

Analysis of a shielded TE011 mode composite dielectric resonator for stable frequency reference

Analysis of a TE₀₁₁ mode composite sapphire-rutile dielectric resonator has been carried out to study the temperature variation of resonance frequency, close to the Cs atomic clock hyperfine frequency of 9.192 GHz. The complementary behavior of dielectric permittivity with temperature of the composite has been exploited to obtain the desired turning point in the resonant frequency. The frequency of the composite structure is found to be independent of the shield diameter beyond four times the puck diameter.     

Development of a Cerebral Autoregulation Model for Use With Clinical Blood Flow Measurements

Cerebral autoregulation is the mechanism which controls blood flow to the brain despite variations in blood pressure. Although important this mechanism is currently not well understood, with autoregulatory failure difficult to diagnose. In this paper we develop a simple model based upon those measurements available in the clinical setting. The model can replicate previous results and is used to investigate a variety of hypothetical autoregulatory responses. Furthermore the model has been extended by including the autoregulatory vessels themselves to explain the observed influence of increased carbon dioxide levels in the blood. A focus on only those measurements which may be realistically obtained in human patients avoids the need for estimating many unknown parameters or the modelling of complex and poorly understood physiological process necessary in previous, more complicated, models.     

Comparison of amorphous iridium water-oxidation electrocatalysts prepared from soluble precursors

Electrodeposition of iridium oxide layers from soluble precursors provides a route to active thin-layer electrocatalysts for use on water-oxidizing anodes. Certain organometallic half-sandwich aqua complexes of iridium form stable and highly active oxide films upon electrochemical oxidation in aqueous solution. The catalyst films appear as blue layers on the anode when sufficiently thick, and most closely resemble hydrous iridium(III,IV) oxide by voltammetry. The deposition rate and cyclic voltammetric response of the electrodeposited material depend on whether the precursor complex contains a pentamethylcyclopentadieneyl (Cp*) or cyclopentadienyl ligand (Cp), and do not match, in either case, iridium oxide anodes prepared from non-organometallic precursors. Here, we survey our organometallic precursors, iridium hydroxide, and pre-formed iridium oxide nanoparticles. From electrochemical quartz crystal nanobalance (EQCN) studies, we find differences in the rate of electrodeposition of catalyst layers from the two half-sandwich precursors; however, the resulting layers operate as water-oxidizing anodes with indistinguishable overpotentials and H/D isotope effects. Furthermore, using the mass data collected by EQCN and not otherwise available, we show that the electrodeposited materials are excellent catalysts for the water-oxidation reaction, showing maximum turnover frequencies greater than 0.5 mol O(2) (mol iridium)(-1) s(-1) and quantitative conversion of current to product dioxygen. Importantly, these anodes maintain their high activity and robustness at very low iridium loadings. Our organometallic precursors contrast with pre-formed iridium oxide nanoparticles, which form an unstable electrodeposited material that is not stably adherent to the anode surface at even moderately oxidizing potentials.     

Fluorine-induced diastereodivergence discovered in an equally rare enantioselective syn-aza-Henry reaction

Attention to the aza-Henry reaction, particularly over the past two decades, has resulted in a wide range of effective catalysts for the enantio- and diastereoselective versions, driven by the versatility of the β-amino nitroalkane products as precursors to secondary amines and vic-diamines. Despite this broad effort, syn-diastereoselective variants are exceedingly rare. We have discovered a subset of α-fluoro nitroalkane additions that are characterized by an unusual crossover in diastereoselection, often delivering the products with high selectivities. We report here a rigorous comparative analysis of non-fluorinated and α-fluoro nitroalkanes in their additions to azomethines. Both homogeneous and heterogeneous catalysis were applied to probe the possibility that this phenomenon might be more widely operative in the enantioselective additions of fluorine-substituted carbon nucleophiles. A complete correlation within four categories is described that uncovered a clear trend, while revealing a dramatic and distinct reversal of diastereoselection that would normally go undetected.

A comparison of enantioselective aza-Henry reactions with both non-fluorinated and α-fluoro nitroalkanes reveals an unusual reversal of diastereoselection favoring the rare syn-aza-Henry product as a result of fluorine-based diastereodivergence.