Synthesis and determination of pKa values of some new 3,4-disubstituted-4,5-dihydro-1H-1,2,4-triazol-5-one derivatives in non-aqueous solvents

3-Alkyl(Aryl)-4-amino-4,5-dihydro-1H-1,2,4-triazol-5-ones (2) reacted with 2-furoyl chloride and thiophene-2-carbonyl chloride to afford the corresponding 3- alkyl(aryl)-4-(2-furoylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (3) and 3-alkyl(aryl)- 4-(2-thienylcarbonylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (4), respectively. The new compounds synthesized were characterized by using IR, 1H-NMR, 13C-NMR and UV spectral data together with elemental analysis. In addition, to investigate the effects of solvents and molecular structure upon acidity, compounds 3 and 4 were titrated potentiometrically with tetrabutylammonium hydroxide in four non-aqueous solvents (isopropyl alcohol, tert-butyl alcohol, N,N-dimethylformamide and acetonitrile). The half-neutralization potential values and the corresponding pKa values were determined for all cases.     

Determination of Folic Acid by CE in Various Cultivated Variety of Lentils

A simple extraction and determination method for folic acid (FA) in lentil samples was developed employing capillary electrophoresis. The analysis was performed in a 75 μm ID fused silica capillary using a running buffer of 10 mM sodium borate (10%, v/v, methanol, pH 9) at +18 kV and a detection wavelength at 200 nm. Methylparaben was used as the internal standard. FA signal response was linear in the range between 1.2 × 10^?5 and 4.8 × 10^?5 M. Limit of detection (inter-day) was determined at 6.12 × 10^?7 M (3.3 σs^?1). The amount of FA found in green, red and mignon lentils was found to range between 0.408 and 0.742 mg g^?1.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Increasing the crystallite and conductivity of polypyrrole with dopant used

The chemical polymerization method is very convenient for obtaining a plurality of the polymer. Chemical synthesizes of polypyrrole (PPy) were performed in acetonitrile solutions containing different dopants: dodecylbenzene sulphonic acid (DBSA), tetrafluoroborate (BF₄ ^?), perchlorate (ClO₄ ^?) and oxalate (C₂O₄ ^2?). These polymers were characterized by using scanning electron microscopy (SEM), ultraviolet–visible (UV–Vis) spectrophotometer, Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) techniques and dry conducting measurement. It was observed that the interactions between the polymers and dopant materials are completely different from each other. As a result of this interaction, the conductivities and crystal structures of PPy are also different from each other. Results in this work showed that the dopants used affected both electrical conductivities and crystal structures of PPy.     

Preparation and characterization of polyfuran/poly(2‐fluoroaniline) conducting composites

This article deals with the chemical synthesis and characterization of poly(2‐fluoroaniline) (P2FAn) and polyfuran (PFu) homopolymers and PFu/P2FAn and P2FAn/PFu composites. P2FAn and PFu homopolymers were synthesized using ammonium persulfate and antimony (III) chloride as catalyst, respectively. These homopolymers and composites were studied in the doped state using Fourier transform infrared spectroscopy and ultraviolet–visible absorption spectroscopy, thermogravimetric analysis, scanning electron microscopy, four‐probe conductivity technique, and Gouy Scale measurements. PFu/P2FAn and P2FAn/PFu composites were found to possess different thermal, conductivity, electronic, and morphological properties from each other when synthesis order of guest and host polymers was varied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3359–3367, 2004     

Medialization Laryngoplasty With Gore-Tex: An Animal Study

Vocal cord paralysis is a disease that can cause voice disability and aspiration problems. Expanded polytetrafluoroethylene (ePTFE; Gore-Tex) has been widely used in cardiovascular and plastic surgery; however, its biocompatibility and safety have not been established precisely in the larynx. In this study, the biocompatibility and safety of ePTFE used in vocal cord medialization in the rabbit larynx were assessed. Type 1 thyroplasty with Gore-Tex was performed on one side of the larynx in eight rabbits. A sham procedure was applied on the contralateral side of their larynx. The rabbits were sacrificed after 6 months, and macroscopic and microscopic evaluations and comparisons were performed. No significant inflammatory response to Gore-Tex or displacement of the implant was seen. There was only a tiny fibrotic capsule surrounding the material in each specimen. Intense eosinophilic cell infiltration was seen surrounding one rabbit specimen. Gore-Tex seems to be a biocompatible, stable, and reversible material that can be safely used in laryngeal framework surgery.     

Synthesis and non-aqueous medium titrations of some new 4-benzylidenamino-4,5-dihydro-1H-1,2,4-triazol-5-one derivatives

The synthesis of 3-alkyl(aryl)-4-(3-ethoxy-4-hydroxybenzylidenamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones 3 from the reactions of 3-alkyl(aryl)-4-amino-4,5-dihydro-1H-1,2,4-triazol-5-ones 2 with 3-ethoxy-4-hydroxybenzaldehyde is described.The acetylation and methylation reactions of the compounds 3 giving compounds of type 4 and 5, respectively, were investigated. The newly synthesized compounds were characterized using elemental analyses and IR, (1)H-NMR, (13)C-NMR and UV spectral data.In addition, to investigate the effects of solvents and molecular structure upon acidity,compounds 3 were titrated potentiometrically with tetrabutylammonium hydroxide in four non-aqueous solvents (isopropyl alcohol, tert-butyl alcohol, acetonitrile and N,N-dimethylformamide). The half-neutralization potential values and the corresponding pKa values were determined for all cases.     

Interfacial Behavior of Cysteine between Mild Steel and Sulfuric Acid as Corrosion Inhibitor

Interfacial behavior of cysteine (Cys) between mild steel and sulfuric acid solution as a corrosion inhibitor has been studied with electrochemical AC (alternating current) and DC (direct current) techniques at (25.0±0.1) °C. The AC impedance results were evaluated using equivalent circuits in which a constant phase element (CPE) has been replaced with double layer capacitance (C_dl) to represent the frequency distribution of experimental data. Changes in impedance parameters (charge transfer resistance and double layer capacitance) indicated that cysteine molecules acted by accumulating at the metal/solution interface. The fractional coverage of the metal surface () was determined using AC impedance results and it was found that the adsorption of cysteine on the mild steel surface followed a Langmuir isotherm model with a standard free energy of adsorption (ΔG⁰_ads) of −35.1 kJ·mol⁻¹.To clarify the type of interaction between mild steel surface and cysteine molecules with a molecular orbital approach, electronic properties, such as, the highest occupied molecular orbital (HOMO) energy, the lowest unoccupied molecular orbital (LUMO) energy, and the frontier molecular orbital coefficients have been calculated. Energy gaps for the interaction of mild steel surface and cysteine molecules (E_{LUMO Fe}−E_{HOMO Cys} and E_{LUMO Cys}−E_{HOMO Fe}) were used to determine whether cysteine molecules acted as electron donors or electron acceptors when they interacted with the mild steel surface. The local reactivity was evaluated through the condensed Fukui indices. Theoretical calculations were carried out using the density functional theory (DFT) at B3LYP level with the 6-311++G(d,p) basis set for all atoms by Gaussian 03W program.     

Vapochromic behavior of polycarbonate films doped with a luminescent molecular rotor

We report on vapochromic films suitable for detecting volatile organic compounds (VOCs), based on polycarbonate (PC) doped with 4‐(triphenylamino)phthalonitrile (TPAP), a fluorescent molecular rotor sensitive to solvent polarity and viscosity. PC films of variable thickness (from 20 up to 80 µm) and containing small amounts of TPAP (0.05 wt%) were prepared and exposed to a saturated atmosphere of different VOCs. TPAP/PC films showed a gradual decrease and red‐shift of the emission during the exposure to solvents with high polarity index and favorable interaction with the polymer matrix such as THF, CHCl₃, and acetonitrile. In the case of the most interacting solvents (THF and CHCl₃), TPAP/PC films also showed a fluorescence increase at longer exposure times, as a consequence of an irreversible, solvent‐induced crystallization process of the polymeric matrix. The vapochromism of TPAP/PC films is rationalized on the basis of alterations of the rotor intramolecular motion upon solvent uptake by PC and polarity effects of the microenvironment. Interestingly, the fluorescence response of the TPAP/PC films shows a non‐trivial, tuneable dependence on film thickness during the second solvent‐exposure stage. The latter effect is attributed to a variable extent of the crystallization process occurring in the PC films. This observation promptly suggests, in turn, an effective procedure to modulate the spectroscopic response in such functionalized polymeric materials through the precise control of the film thickness. Copyright © 2015 John Wiley & Sons, Ltd.     

A sensitive and rapid determination of ranitidine in human plasma by HPLC with fluorescence detection and its application for a pharmacokinetic study

A novel precolumn derivatization reversed-phase high-performance liquid chromatography method with fluorescence detection is described for the determination of ranitidine in human plasma. The method was based on the reaction of ranitidine with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole forming yellow colored fluorescent product. The separation was achieved on a C(18) column using methanol-water (60:40, v/v) mobile phase. Fluorescence detection was used at the excitation and emission of 458 and 521 nm, respectively. Lisinopril was utilized as an internal standard. The flow rate was 1.2 mL/min. Ranitidine and lisinopril appeared at 3.24 and 2.25 min, respectively. The method was validated for system suitability, precision, accuracy, linearity, limit of detection, limit of quantification, recovery and robustness. Intra- and inter-day precisions of the assays were in the range of 0.01-0.44%. The assay was linear over the concentration range of 50-2000 ng/mL. The mean recovery was determined to be 96.40 ± 0.02%. This method was successfully applied to a pharmacokinetic study after oral administration of a dose (150 mg) of ranitidine.