Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

Sodium 5‐nitro‐2‐pyridonate trihydrate

The title compound, alternatively sodium pyridin‐2‐olate trihydrate, Na⁺·C₅H₃N₂O₃^?·3H₂O, crystallizes in the P space group. It is made up of edge‐shared chains of NaO₆ octahedra with five water mol­ecules and one 5‐nitro‐2‐pyridonate anion. Four of these water mol­ecules are bicoordinating, involved in connecting the adjacent octahedra, and the fifth is coordinated to only one octahedron. The crystal structure is stabilized by a network of strong O—H?O and O—H?N interactions. The organic moieties occupy the space between the chains with an antiparallel alignment.     

Micellar effect on the electron transfer reaction of chromium(V) ion with organic sulfides

The rate of electron transfer from organic sulfides to [Cr^V(ehba)₂]⁻ (ehba-2-ethyl-2-hydroxy butyric acid) decreases with a decrease in the polarity of the medium. The anionic surfactant, SDS and the cationic surfactant, CTAB have different effects on the kinetics of this reaction. The micellar inhibition observed in the presence of SDS is probably due to the decrease in the polarity and the electrostatic repulsion faced by the anionic oxidant from the anionic micelle and the partition of the hydrophobic substrate between the aqueous and micellar phases. The micellar catalysis in the presence of CTAB is attributed to the increase in the concentration of both reactants in the micellar phase. This micellar catalysis is observed to offset the retarding effects of the less polar micellar medium and the unfavorable charge-charge interaction between the + charge developed on S center in the transition state and the cationic micelle. This catalysis is contrary to the enormous micellar inhibition observed with IO₄⁻, HSO₅⁻ and HCO₄⁻ oxidation of organic sulfides.     

Graphene sheet-encased silica/sulfur composite cathode for improved cyclability of lithium-sulfur batteries

Journal of Solid State Electrochemistry - The “shuttle effect” of polysulfides is a serious issue, resulting in a decrease in the life-cycle of lithium-sulfur (Li-S) batteries. To...     

Choline chloride based deep eutectic solvents for the lignocellulose nanofibril production from Mongolian oak (Quercus mongolica)

Cellulose - Lignocellulose nanofibrils (LCNFs) were produced from the biomass of Mongolian oak for the first time using deep eutectic solvent pretreatment and mechanical defibrillation. Three...     

Influence Of Zro2 on The Physicochemical Properties of Phosphate-Based Glasses and Glass Ceramics

Abstract

Phosphate-based bioactive glasses and their glass ceramics for 47P₂O₅– (30.5)CaO–(22.5 ? x)Na₂O–xZrO₂ for different ZrO₂ contents (x = 0, 1.5, 3.0, 4.5, and 6.0 mol%) were prepared through melt quenching and controlled heat treatment procedures. The amorphous nature of glasses and the presence of crystalline phases in glass ceramics were studied by means of X-ray diffraction (XRD) studies. The density, molar volume, ultrasonic velocities, attenuation, elastic constants, and microhardness of glass and glass ceramics were used to study the structural changes. The formation of hydroxyapatite layer on the surface of glasses and glass ceramics after immersion in simulated body fluid (SBF) was explored through XRD, Fourier transform infrared (FTIR), and scanning electron microscopy (SEM) analyses. The results indicate that the added ZrO₂ increases the crosslink density of glasses, resulting in network stability, and also induces the formation of an apatite layer on the surface of glasses.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Heteropoly acid catalyzed synthesis of 8-methyl-2-aryl/alkyl-3-oxabicyclo[3.3.1]non-7-ene derivatives through (3,5)-oxonium-ene reaction

A variety of aldehydes undergo a smooth coupling with (4-methylcyclohex-3-en-1-yl)methanol in the presence of 2 mol % of phosphomolybdic acid in dichloromethane to afford 3-oxabicyclo[3.3.1]non-7-ene in good yields through 3,5-oxonium-ene cyclization under mild conditions. The use of inexpensive, nontoxic, and readily available heteropoly acid catalyst makes this method simple, convenient, and environmental-friendly.