Spectral and voltammetric studies on titanium substituted Keggin-type heteropolyanions

Bonding and redox properties of mono- and dititanium substituted 12-heteropolytungsto-phosphates and their complexes with bivalent Mn, Co, Ni and Cu are studied by UV-Vis, ESR and cyclicvoltammetric techniques. The heteropoly blue analogue [Ti^IIITi^IVW₁₀PO₄₀]⁸⁻ is unstable and its presence in solution is proved by optical and ESR spectroscopy. ESR results reveal that the odd electron is trapped on the titanium atom at 77 K. The optical electronegativity of Ti(III) in this heteropoly blue is estimated to be 2.4 from the intervalence charge transfer (IVCT) bands. X-ray powder diffraction results show that the complexes K₅M^II[Ti₂W₁₀PO₄₀].xH₂O(M^II = Cu or Mn) are isomorphous with K₇[Ti₂W₁₀PO₄₀].6H₂O. Electronic spectroscopy indicates very high symmetry around the bivalent metal ion M in the K₅M^II[Ti₂W₁₀PO₄₀].xH₂O complexes. This high symmetry is confirmed in K₅Cu[Ti₂W₁₀PO₄₀] by the observation of dynamic Jahn-Teller (JT) distortion at 300 K and static JT distortion at 77 K.     

Kinetics and mechanism of oxidation of substituted benzaldehydes by quinolinium fluorochromate

The kinetics of oxidation of a number of meta- and para-substituted benzaldehydes by quinolinium fluorochromate, QFC has been studied in aqueous acetic acid medium in the presence of acid. The products of oxidation are the corresponding benzoic acids. The reaction is first order each in substrate, QFC and HClO₄. Electron-withdrawing substituents increase the rate, while electron-releasing substituents decrease it and the rate data obey Hammett's relationship. The reaction constant for the oxidation has a value of 1.16±0.07 at 30°C. The activation enthalpies and entropies are calculated and the possible mechanism for oxidation is discussed.     

Pyrene-Hydrazone-π···Hole Coupled Turn-on Fluorescent and Naked- Eye Colorimetric Sensor for Cyanide: Role of Homogeneous π-Hole Dispersion in Anion Selectivity

A pyrene based probe associated with π···hole – hydrazone as one of the recognizing elements is synthesized and its turn in to a selective colorimetric and turn-on fluorescent sensor, (L³) for cyanide anion. This chemo sensor show high selectivity towards cyanide anion through photo electron transfer (PET) mechanism. The binding strength and sensitivity of the chemo sensor L³ towards cyanide are found to be 2.0 X 10⁴, and 4.44 x 10^-4 respectively. We have compared this high selectivity of the receptor towards cyanide, with our previously reported receptors L¹ and L². The detailed UV-Vis, Emission, ¹H-NMR, IR spectroscopic and Molecular Electrostatic Potential (MEP) studies reveals that the homogeneous π···hole dispersion in the aromatic ring governing the selectivity of the receptor towards cyanide anion. Such a positive π···hole homogeneous dispersion is missing in the case of sensor L², instead we have polarized π···hole dispersion towards 2^nd and 4^th position of di-nitrophenyl chromophoric unit in L².

Graphical Abstract

     

Structure and dynamics of biological liquid crystals

A review of thermodynamic and flow liquid crystal models is presented and applied to a wide range of biological liquid crystals (BLCs), including helicoidal plywoods, biopolymer solutions and in vivo liquid crystals. The key characteristics of liquid crystals (self-assembly, packing, defects, functionalities, processability) are discussed in relation to biological materials and the strong correspondence between different synthetic and biological materials is discussed. Viscoelastic models for nematic and chiral nematics are reviewed and discussed in terms of key parameters that facilitate understanding and quantitative information from experimental measurements. The range and consistency of the predictions demonstrates that the use of mesoscopic liquid crystal models is an efficient tool to develop the science and biomimetic applications of mesogenic biological materials.     

Biological Applications of Synthesized ZnO Nanoparticles Using Pleurotus djamor Against Mosquito Larvicidal,Histopathology, Antibacterial,Antioxidant and Anticancer Effect

The present study pertained to biosynthesis, characterization and biomedical application (larvicidal, histopathology, antibacterial, antioxidant and anticancer activity) of Zinc oxide nanoparticles (ZnONPs) from Pleurotus djamor. The synthesized NPs were characterized using spectral and microscopic analyses and further confirmed by UV–Visible spectrophotometer with apeak of 350 nm. The ZnONPs showed strong antioxidant property (DPPH, H₂O₂ and ABTS⁺ radical assay) and expressed good larval toxicity against Ae. aegypti and Cx. quinquefasciatus (IVth instar larvae) with the least LC₅₀ and LC₉₀ values (10.1, 25.6 and 14.4, 31.7 mg/l) after 24 h treatment, respectively. We noticed the morphological changes (damaged anal papillae area and the cuticle layers) in the treated larvae. For the antibacterial assay, the highest growth inhibition zone was recorded in C. diphteriae (28.6?±?0.3 mm), followed by P. fluorescens (27?±?0.5 mm) and S. aureus (26.6?±?1.5 mm). The in vitro cytotoxicity assay depicted a significant level of cytotoxic effects (LC₅₀ values 42.26 μg/ml) of ZnONPs against the A549 lung cancer cells, even at low dose. The overall findings of the study suggest that P. djamor had the ability for the biosynthesis of ZnONPs and could act as an alternative biomedical agent for future therapeutic applications in medical avenues.

     

Defect-induced anisotropic surface reactivity and ion transfer processes of anatase nanoparticles

Surface reactivity and ion transfer processes of anatase TiO₂ nanocrystals were studied using lithium bis(trifluoromethylsulfone)imide (LiTFSI) as a probing molecule. Analysis of synthesized anatase TiO₂ by electron microscopy reveals aggregated nanoparticles (average size ~8 nm) with significant defects (holes and cracks). With the introduction of LiTFSI salt, the Li⁺-adsorption propensity towards the surface along the anatase (100) step edge plane is evident in both x-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analysis. Ab initio molecular dynamics (AIMD) analysis corroborates the site-preferential interaction of Li⁺ cations with oxygen vacancies and the thermodynamically favorable transport through the (100) step edge plane. Using ⁷Li nuclear magnetic resonance (NMR) chemical shift and relaxometry measurements, the presence of Li⁺ cations near the interface between TiO₂ and the bulk LiTFSI phase was identified, and subsequent diffusion properties were analyzed. The lower activation energy derived from NMR analysis reveals enhanced mobility of Li⁺ cations along the surface, in good agreement with AIMD calculations. On the other hand, the TFSI^– anion interaction with defect sites leads to CF₃ bond dissociation and subsequent generation of carbonyl fluoride-type species. The multimodal spectroscopic analysis including NMR, electron paramagnetic resonance (EPR), and x-ray photoelectron spectroscopy (XPS) confirms the decomposition of TFSI^– anions near the anatase surface. The reaction mechanism and electronic structure of interfacial constituents were simulated using AIMD calculations. Overall, this work demonstrates the role of defects at the anatase nanoparticle surface on charge transfer and interfacial reaction processes.     

Multiobjective Optimization of Fabrication Parameters of Jute Fiber/Polyester Composites with Egg Shell Powder and Nanoclay Filler

In the present study, a model is presented to optimize the fabrication parameters of natural fiber reinforced polyester matrix composites with dual fillers. In particular, jute fiber mat was chosen as reinforcement and eggshell powder (ESP) and montmorillonite nanoclay (NC) were selected as fillers. The weight per square meter (GSM) of the fiber, the weight percentage of ESP and NC have been chosen as independent variables and the influence of these variables on tensile, flexural and impact strength of the composite has been inspected. The permutations of the different combinations of factors are intended to accomplish higher interfacial strength with the lowest possible number of tested specimens. The experiments were designed by the Taguchi strategy and a novel multi-objective optimization technique named COPRAS (COmplex PRoportional ASsessment of alternatives) was used to determine the optimal parameter combinations. Affirmation tests were performed with the optimal parameter settings and the mechanical properties were evaluated and compared. Experimental results show that fiber GSM and eggshell powder content are significant variables that improve mechanical strength, while the nanoclay appears less important.     

A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

Growth, optical, mechanical and dielectric studies on NLO active pure and metal ion doped single crystals of bis-thiourea zinc chloride

Good quality single crystals of pure and metal ion (Ni²⁺) doped bis-thiourea zinc chloride (BTZC) possessing excellent nonlinear optical properties have been grown from aqueous solution by the slow solvent evaporation technique. The lattice parameters of the grown crystals are determined by single crystal X-ray analysis. The well defined sharp peaks in the powder X-ray diffraction pattern reveals the crystalline perfection and the EDAX spectrum confirms the presence of dopant in the lattice of the parent crystal. The DRS UV-visible spectral study reveals improved transparency for the doped crystal, ascertaining the inclusion of metal ion in the lattice. The optical band gap of the pure and doped crystals was calculated to be 4.8 and 5.2 eV respectively from the UV transmission spectrum. The vickers hardness test brings forth higher hardness value for Ni²⁺doped BTZC as compared to pure BTZC crystal. The dielectric measurement exhibits very low dielectric constant and dielectric loss at higher frequencies for both the pure and Ni²⁺doped BTZC. The existence of second harmonic generation signals in the crystal also has been confirmed by performing the Kurtz powder test.