Entangled States Based on Two Coherent States 3π/2 out of Phase

Entangled states based on two coherent states 3π/2 out of phase with each other, i.e. ｜α〉 and e^iФ｜-iα〉, as well as on a special state with a relative phase Ф = ｜α｜^2, are constructed. By analysing the amount of entanglement it is evident that entangled states based on this special state can be used as an excellent resource for quantum teleportation. It is also revealed that these entangled states possess some nonclassical features.     

Modified Householder iterative method free from second derivatives for nonlinear equations

In this paper, we suggest and analyze a new two-step predictor–corrector type iterative method free from second derivatives for solving nonlinear equations of the type f(x)=0. This new method includes the two-step Newton method as a special case. We prove that the new iterative method is of fourth-order. Several examples are given to illustrate the efficiency of this new method and its comparison with other iterative methods. This method can be considered as a significant improvement of the Newton method and its variant forms.     

Large signal performance of micromachined silicon inductive microphones

A mathematical model for the open-circuit output voltage of a micromachined silicon inductive microphone is presented. The model, basically a sine-series function, can easily yield closed-form expressions for the amplitudes of the output components resulting from a multisinusoidal input acoustic pressure. The special case of an equal-amplitude two-tone acoustic pressure input is considered in detail. The results show that, the microphone generates both even and odd-order harmonic and intermodulation products.     

Empirical model for the current-voltage characteristic of resonant-tunneling devices

An empirical model is presented for the current-voltage characteristics of resonanttunneling (RT) devices. By using this model an analytical study of millimeter-band electronic circuits employing RT devices can be performed.     

Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

An electrolytic device for preparation of hydrogen and oxygen from water for isotopic analysis

An electrolytic device for decomposition of water has been developed which readily gives hydrogen and oxygen for isotopic measurement with a mass spectrometer. A 20-mul sample can be decomposed quantitatively in 10 min with good reproducibility. The results produced are comparable with those obtained by reduction with uranium.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Palladium(0)-catalyzed regioselective synthesis of alpha-dehydro-beta-amino esters from amines and allyl acetates: synthesis of a alpha-dehydro-beta-amino acid derived cyclic peptide as a constrained beta-turn mimic

Acetates derived from the adducts of the Baylis-Hillman reaction can be reacted in a regioselective manner with amines in the presence of palladium(0) catalyst to afford alpha-dehydro-beta-amino esters (2 and 3) in good yields. The regioselectivity of the reaction can be controlled by temperature and reaction medium leading to the synthesis of regioisomers 2 or 3. The alpha-dehydro-beta-amino acid 3 is a turn inducer, and the dipeptides 6 derived from it show the presence of an eight-membered intramolecular hydrogen bond. Also, cobalt(II) chloride catalyzes the cleavage of epoxy peptides with alpha-dehydro-beta-amino acid derivative 3b to afford the corresponding dipeptide derivatives 8, which exhibit an intramolecular hydrogen bond and thus mimic a beta-turn. This intramolecular hydrogen bonding preorganizes the corresponding diallylated peptide 8c for cyclization via ring-closing metathesis to afford the cyclic peptide 9 as a constrained mimic of a beta-turn.     

Sensory, physicochemical and microbiological quality of irradiated minimally processed cauliflower

Minimally processed cauliflower samples were irradiated, stored at 5 °C for 2 weeks and analyzed for sensory, physicochemical and microbiological qualities at 0th, 7th and 14th days. The data showed highest mean values of 7.93 and 7.57 for appearance and flavor, respectively, for 1.0 kGy treated samples. The D₁₀ values of contaminating microorganisms on cauliflower were 0.20 (Escherischia coli) and 0.24 kGy (Salmonella paratyphae A.) and the resulting 5D₁₀ value was 1.2 kGy. The study revealed that a dose of 1.5 kGy is enough for retention of quality and reduction of microbial load to 5D₁₀ values in cauliflower during 2 weeks storage at refrigerated temperature.     

Dithiolate complexes of manganese and rhenium: X-ray structure and properties of an unusual mixed valence cluster Mn3(CO)6(mu-eta2-SCH2CH2CH2S)3

Treatment of Mn(2)(CO)(10) with 3,4-toluenedithiol and 1,2-ethanedithiol in the presence of Me(3)NO.2H(2)O in CH(2)Cl(2) at room temperature afforded the dinuclear complexes Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (1), and Mn(2)(CO)(6)(mu-eta(4)-SCH(2)CH(2)S-SCH(2)CH(2)S) (2), respectively. Similar reactions of Re(2)(CO)(10) with 3,4-toluenedithiol, 1,2-benzenedithiol, and 1,2-ethanedithiol yielded the dirhenium complexes Re(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (3), Re(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S) (4), and Re(2)(CO)(6)(SCH(2)CH(2)S-SCH(2)CH(2)S) (5), respectively. In contrast, treatment of Mn(2)(CO)(10) with 1,3-propanedithiol afforded the trimanganese compound Mn(3)(CO)(6)(mu-eta(2)-SCH(2)CH(2)CH(2)S)(3) (6), whereas Re(2)(CO)(10) gave only intractable materials. The molecular structures of 1, 3, and 6 have been determined by single-crystal X-ray diffraction studies. The dimanganese and dirhenium carbonyl compounds 1-5contain a binucleating disulfide ligand, formed by interligand disulfide bond formation between two dithiolate ligands identical in structure to that of the previously reported dimanganese complex Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S). Complex 6, on the other hand, forms a unique example of a mixed-valence trimangenese carbonyl compound containing three bridging 1,3-propanedithiolate ligands. The solution properties of 6 have been investigated by UV-vis and EPR spectroscopies as well as electrochemical techniques.