排序方式: 共有76条查询结果,搜索用时 15 毫秒
1.
A flow injection (FI) method with flame atomic absorption spectrometry (FAAS) detection was developed for the determination and speciation of nitrite and nitrate in foodstuffs and wastewaters. The method is based on the oxidation of nitrite to nitrate using a manganese(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the MnO2 solid phase reagent to Mn(II), which is measured by FAAS. The absorbance of Mn(II) are proportional to the concentration of nitrite in the samples. The injected sample volume was 400 μL with a sampling rate of analyses was 90 h−1 with a relative standard deviation better than 1.0% in a repeatability study. Nitrate is reduced to nitrite in proposed FI-FAAS system using a copperized cadmium microcolumn and analyzed as nitrite. The calibration curves were linear up to 20 mg L−1 and 30 mg L−1 with a detection limit of 0.07 mg L−1 and 0.14 mg L−1 for nitrite and nitrate, respectively. The results exhibit no interference from the presence of large amounts of ions. The method was successfully applied to the speciation of nitrite and nitrate in spiked natural water, wastewater and foodstuff samples. The precision and accuracy of the proposed method were comparable to those of the reference spectrophotometric method. 相似文献
2.
Batool Akhlaghinia Mozafar Asadi Elham Safaee Mozhgan Heydarpoor 《Phosphorus, sulfur, and silicon and the related elements》2013,188(10):2099-2104
Alcohols and phenols are protected with hexamethyldisilazane in the presence of N,N′,N′,N?-tetramethyletra-2,3-pyridinoporphyrazinato copper (II) in good-to-excellent yields at room temperature. 相似文献
3.
Shahmirzaee Mozhgan Shafiee Afarani Mahdi Arabi Amir Masoud Iran Nejhad Ahmad 《Research on Chemical Intermediates》2017,43(1):321-340
Research on Chemical Intermediates - ZnAl2O4/ZnO nanocomposites with different ZnO (20, 30, and 40 mol%) concentrations and coated samples on supports were successfully prepared through... 相似文献
4.
Rostami Mojtaba Aghajanzadeh Mozhgan Zamani Mostafa Manjili Hamidreza Kheiri Danafar Hossein 《Research on Chemical Intermediates》2018,44(3):1889-1904
Research on Chemical Intermediates - In this study, a kind of magnetic Fe3O4@mTiO2-GO (where m was shorted mesoporous) hybrids with core–shell nano-structure for controlled dual targeted drug... 相似文献
5.
Structural Chemistry - Density functional theory (DFT) calculations at B3LYP/6-31+G(d) level were employed to investigate the influence of the non-metal encapsulation of the second row of the... 相似文献
6.
Mohammad Ali Zolfigol Peyman Salehi Arash Ghorbani-Choghamarani Maliheh Safaiee Mozhgan Shahamirian 《合成通讯》2013,43(11):1817-1823
Silica chromate easily converts 1,4‐dihydropyridines to their corresponding pyridines in the presence of NaHSO4 · H2O and wet SiO2 in dichloromethane at room temperature in good to excellent yields. 相似文献
7.
Mohadeseh Rahimi‐Mohseni Jahan Bakhsh Raoof Tahereh A. Aghajanzadeh Reza Ojani 《Electroanalysis》2019,31(12):2311-2318
In this study, we present a fast, simple, low‐cost and disposable method for determination of phenolic content in water samples, using a paper based polyphenol oxidase biosensor. The propylamine functionalized silica nanoparticles was dropped onto a paper sheet. After drying at room temperature, the potato tissue extract including polyphenol oxidase was immobilized on the paper via physical and chemical adsorption. The modified paper was placed on the top of the graphite screen printed electrode. To construct of an electrochemical nanobiosensor, the electrochemical behavior of the modified electrode in different steps was investigated by cyclic voltammetry and electrochemical impedance spectroscopy methods. After being optimized the effective parameters, the changes in the biosensor electrochemical response vs. to the different concentrations of the substrate (phenol solution) were monitored by differential pulse voltammetry and amperometry methods. The linear relationships for phenol detection were obtained in the concentration ranges of 0.01–160 μM and 0.1–300 μM with a detection limit of 0.007 μM and 0.042 μM with DPV and amperometry methods, respectively. This method was successfully used in the voltammetric determination of the phenol content in the real samples, like the river water and the wastewater of wood factory. 相似文献
8.
Cellulose-ZnO composite was achieved by microwave assisted dissolution of cellulose in ionic liquid 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) followed by addition of premixed ground of Zn(CH3COO)2·2H2O and NaOH. Surface characterization, optical property and thermal stability of nanocomposite were determined by X-ray diffraction, scanning electron microscopy (SEM), UV–Vis spectroscopy and thermo gravimetric analysis. XRD patterns showed the ZnO in polymer matrix has the wurtzite structure. Presence of zinc oxide nanoparticles and cellulose fibers in the composites were observed by SEM. Band-edge transition of zinc oxide in the nanocomposite occurs in lower wavelength than bulk zinc oxide. Thermal stability of nanocomposite was lower than regenerated cellulose due to catalyst behavior of zinc oxide nanoparticles in cellulose matrix. 相似文献
9.
In the present study, two new organic dyes based on indigo were prepared and used as sensitizers in dye-sensitized solar cells. To this end, indoxyl was utilized as the electron-donor and acrylic acid and cyanoacrylic acid were used as the electron-acceptor anchoring groups. These dyes were purified and characterized by analytical techniques. Spectrophotometric evaluations of the prepared dyes in solution and on a nano-anatase-TiO2 substrate were investigated. Additionally, oxidation potential measurements were also carried out. Finally, dye-sensitized solar cells were fabricated to determine the photovoltaic behavior and conversion efficiency of each dye.
[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.] 相似文献
10.
The present work describes the construction of a new modified graphite-multiwall carbon nanotube paste electrode by casting the appropriate mixture of tetraheptylammonium iodide-iodine as a new modifier. The modified paste electrode was used for the determination of ascorbic acid (AA) in a phosphate buffer solution (pH 2.0). When compared to activated carbon, a graphite and multiwall carbon nanotube paste electrode containing a new modifier, the proposed modified paste electrode not only shifted the oxidation potential of AA towards a less-positive potential but also enhanced its oxidation peak current. Further, the oxidation of AA was highly stable at the modified paste electrode. The optimum analytical conditions were sought. The current response of AA increases linearly while increasing its concentration from 5.6 × 10(-5) to 1.2 × 10(-2) M with a correlation coefficient of 0.9991; the detection limit (3σ) was found to be of 3.6 × 10(-5) M. The present modified paste electrode was also successfully used for the determination of AA in the presence of common interference compounds. The present modified electrode was successfully demonstrated towards the determination of AA in pharmaceutical and food samples. 相似文献