Computational design of new organic (D–π–A) dyes based on benzothiadiazole for photovoltaic applications,especially dye-sensitized solar cells

Research on Chemical Intermediates - A theoretical study on four organic dyes based on bis(4-hexyloxy)triphenylamine as donor and electron acceptor cyanoacrylic acid with a...     

Semilinear wave models with friction and viscoelastic damping

In this paper, we study the global (in time) existence of small data solutions to the Cauchy problem for the semilinear wave equation with friction, viscoelastic damping, and a power nonlinearity. We are interested in the connection between regularity assumptions for the data and the admissible range of exponents p in the power nonlinearity.     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

The reaction of tetralones with nitriles: a simple approach to the synthesis of new substituted benzo[h]quinazolines, benzo[f]quinazolines and dibenzo[a,i]phenanthridines

The one-pot reaction of 1-tetralone with nitriles in the presence of triflic anhydride affords in good yields 2,4-disubstituted 5,6-dihydrobenzo[h]quinazolines, which oxidation with DDQ leads to the corresponding benzo[h]quinazolines. 2-Tetralone undergoes identical process forming 1,3-disubstituted 5,6-dihydrobenzo[f]quinazolines. However, when the reaction of 2-tetralone is carried out with methylthiocyanate as nitrile, 5-methylthiotetrahydrodibenzo[a,i]phenanthridines are isolated in good yields. Easy transformations of the methylthio group offer possible access to a variety of substituted dibenzo[a,i]phenanthridines.     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

Synthesis of new two-photon absorbing fluorene derivatives via Cu-mediated Ullmann condensations

The Ullmann amination reaction was utilized to provide access to a number of fluorene analogues from common intermediates, via facile functionalization at positions 2, 7, and 9 of the fluorene ring. Through variation of amine or iodofluorene derivative, analogues bearing substitutents with varying electron-donating and electron-withdrawing ability, e.g., diphenylamino, bis-(4-methoxyphenyl)amine, nitro, and benzothiazole, were synthesized in good yield. The novel fluorene derivatives were fully characterized, including absorption and emission spectra. Didecylation at the 9-position afforded remarkably soluble derivatives. Target compounds 4, 5, and 9 are potentially useful as fluorophores in two-photon fluorescence microscopy. Their UV-vis spectra display desirable absorption in the range of interest suitable for two-photon excitation by near-IR femtosecond lasers. Preliminary measurements of two-photon absorption indicate the derivatives exhibit high two-photon absorptivity, affirming their potential as two-photon fluorophores. For example, using a 1,210 nm femtosecond pump beam, diphenylaminobenzothiazolylfluorene 4 exhibited nondegenerate two-photon absorption, with two-photon absorptivity (delta) of ca. 820 x 10(-50) cm(4) s photon(-1) molecule(-1) at the femtosecond white light continuum probe wavelength of 615 nm.     

Charge-transfer complexes of indenophanes with π-acceptors

The charge-transfer (CT) spectra of the -complexes formed by a number of -acceptors with several indenophanes as well as indene as a model compound have been measured in methylene chloride at 20 °C. Association constants and transition energies of these complexes as well as ionization potentials of the -donors have been determined. The data obtained indicate the existence of transannular electronic interactions in the indenophane nucleus. Furthermore, the pseudo-para- andmeta[2.2]indenophane isomers (3 and4) show a large difference in their -base strength. A good linear relationship has been observed between the association constants and _max of the long wavelength CT bands for the -complexes of these -donors with both tetracyanoethylene (TCNE) and 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ). All CT complexes studied have a 1:1 stoichiometry.

---

Charge-transfer-Komplexe aus Indenophanen und -Akzeptoren

Zusammenfassung Die Charge-transfer-Spektren (CT-Spektren) von -Komplexen aus Indenophanen bzw. der Modellverbindung Inden und verschiedenen -Akzeptoren wurden in Methylenchlorid bei 20 °C bestimmt. Die Assoziationskonstanten und Übergangsenergien dieser Komplexe sowie die Ionisationspotentiale der -Donatoren wurden ermittelt. Die Daten sprechen für das Vorliegen transannularer elektronischer Wechselwirkungen im Indenophan-System. Die isomeren pseudo-para- und -meta[2.2]indenophane3 und4 unterscheiden sich in ihrer -Basizität deutlich. Es besteht eine gute lineare Korrelation zwischen den Assoziationskonstanten und _max der langwelligen CT-Banden der verschiedenen -Donatoren mit Tetracyanoethylen (TCNE) und 2,3-Dichlor-5,6-dicyano-p-benzochinon (DDQ). Alle untersuchten CT-Komplexe besitzen 1:1-Stöchiometrie.

     

Transient and steady state creep of Al-4.5 wt.% Mg during phase transformation

Transient and steady state creep of Al-4.5 wt. % Mg alloy was studied under various constant stresses ranging from 91 MPa to 117 MPa in the temperature range from 473 K to 553 K. The results of creep characteristics have shown two main deformation temperature regions (below 493 K and above 513 K as well as a transient region between these temperatures). Peak values of transient creep parametersB andn were obtained at 493 K. The transient creep parameterB was related to the steady state creep rate _st through the exponent which was found to range from 0.85 to 0.5. The stress exponentm of the steady state creep has been found to be minimum at the steady state strain peaks, which is characteristic of dislocation climb along the grain boundaries. Microstructural analysis confirmed that the above mentioned mechanism took place in the dissolution region of-phase.