Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

Si-tolerance of iron doped Pt/alumina catalyst in the total oxidation of VOC

Summary In the present study the effects of addition of iron on the catalytic activity and Si tolerability of Pt/g-Al₂O₃in the total oxidation of volatile organic compounds were investigated. Preliminary results showed that there is a noticeable improvement effect on Si-tolerance of catalyst, particularly for short term poison exposure. Bulk analysis of deposited silicon on the catalyst surface indicated that both Pt/g-Al₂O₃and iron-doped pellets had roughly the same silicone uptakes. Deactivation of catalyst was reversible and much faster for iron doped sample. The promoting effects of iron were related to its electronegativity and, to blocking of fewer Pt sites when iron is present at the surface of the catalyst.     

Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Fabrication and characterization of highly crystalline mordenite membranes on α-alumina disks via a seeded in situ template-free hydrothermal treatment

A template-free seeded short-time in situ hydrothermal treatment was carried out in a brass autoclave to synthesize crystalline mordenite (MOR) membranes on alumina-silicate disk supports with micro-scale pores. According to XRD analysis, MOR was the only zeolitic material present in the membrane layers on the supports. SEM examination of the membranes showed three different layers of the membrane thickness: (i) support sub-layer, (ii) mix penetrated mid-layer, the MOR crystals filling the pores among the support (about 4–5 μm), and (iii) MOR top-layer (about 4–5 μm). The crystalline bonds between MOR crystals of the membrane top-layer and the crystals of the support were clearly observed within the mid-layer. The continuous top-layer of zeolitic membrane was formed by many large and well-shaped crystals. The seeding treatment significantly enhanced the formation of MOR crystals onto the surface of the supports. EDAX analysis showed a Si/Al ratio of 6.8 for the MOR layer of the membrane. Due to their hydrophilic natures, the polycrystalline MOR membranes were found to be selective for continuous dehydration of different EtOH–water mixtures through an adsorption–diffusion–desorption mechanism. Both total permeation flux and separation factor of the membrane were found to increase by increasing temperature and water concentration of feed. The continuity and high crystallinity of the membrane top-layer led to the fairly high dehydration of EtOH. It was found that there was no pinhole within the layer and the morphology of the membrane was almost defect-free.     

Highly edge-connected factors using given lists on degrees

Let G be a 2k-edge-connected graph with and let for every . A spanning subgraph F of G is called an L-factor, if for every . In this article, we show that if for every , then G has a k-edge-connected L-factor. We also show that if and for every , then G has a k-edge-connected L-factor.     

Computational mechanistic investigation of the gas phase C2H4 + CO reaction on the singlet and triplet potential energy surfaces

Reaction pathways of ethylene and carbon monoxide on the singlet and triplet potential energy surfaces (PESs) have been calculated at B3LYP/6-311++G (3df, 3dp), G3B3 and CCSD(T)//B3LYP levels. Reaction mechanisms have been investigated by analysis of various structures. Suggested reaction mechanisms reveal that ³P3(CH₂CHCHO) and ³P4(CH₃CCHO) are thermodynamically stable adducts with the negative value in Gibbs free energies on the triplet PES. In addition, results show that one intersystem crossing exists between triplet and singlet PESs, which are obtained by scanning of the C–C bond length in ¹IN3 and ³IN7 species.