Intramolecular nitrone cycloaddition reaction on carbohydrate-based precursors: application in the synthesis of spironucleosides and spirobisnucleosides

A simple synthesis of chiral spironucleosides and spirobisnucleosides is described. Intramolecular 1,3-dipolar nitrone cycloaddition reaction of d-glucose-derived precursors having olefin at C-3 and nitrone at C-5, C-1, or C-2 (in nor-series) furnished bisisoxazolidinospirocycles 4-7, 11, and 12 in good yields. Reductive ring opening of the isoxazolidine moieties in 4-6 followed by construction of a nucleoside base upon the generated amino groups smoothly yielded spirobisnucleosides 17 and 18 and spironucleosides 20 and 21.     

Sunlight assisted solvent free synthesis of tert-butylperesters

Abstract

A green and efficient methodology has been developed for the direct conversion of aryl aldehydes to the corresponding tert-butyl peresters. The reaction has been carried out in absence of any solvent and the sunlight is used as the green source of energy. In this reaction tetrabutylammonium iodide (TBAI) acts as the mild organo catalyst and tert-butyl hydroperoxide (TBHP) serve as the source of tert-butyl group.     

Strain rate effects on the mechanical behavior of two Dual Phase steels in tension

This paper presents an experimental investigation on the strain rate sensitivity of Dual Phase steel 1200 (DP1200) and Dual Phase steel 1400 (DP1400) under uni-axial tensile loads in the strain rate range from 0.001?s^?1 to 600?s^?1. These materials are advanced high strength steels (AHSS) having high strength, high capacity to dissipate crash energy and high formability. Flat sheet specimens of the materials having gauge length 10?mm, width 4?mm and thickness 2?mm (DP1200) and 1.25?mm (DP1400), are tested at room temperature (20^°C) on electromechanical universal testing machine to obtain their stress-strain relation under quasi-static condition (0.001?s^?1), and on Hydro-Pneumatic machine and modified Hopkinson bar to study their mechanical behavior at medium (3?s^?1, and 18?s^?1) and high strain rates (200?s^?1, 400?s^?1, and 600?s^?1) respectively. Tests under quasi-static condition are performed at high temperature (200^°C) also, and found that tensile flow stress is a increasing function of temperature. The stress-strain data has been analysed to determine the material parameters of the Cowper-Symonds and the Johnson-Cook models. A simple modification of the Johnson-Cook model has been proposed in order to obtain a better fit of tests at high temperatures. Finally, the fractographs of the broken specimens are taken by scanning electron microscope (SEM) to understand the fracture mechanism of these advanced high strength steels at different strain rates.     

Quantum capacitance: A microscopic derivation

We start from microscopic approach to many body physics and show the analytical steps and approximations required to arrive at the concept of quantum capacitance. These approximations are valid only in the semi-classical limit and the quantum capacitance in that case is determined by Lindhard function. The effective capacitance is the geometrical capacitance and the quantum capacitance in series, and this too is established starting from a microscopic theory.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Silver Nanoparticles in Polyacrylamide and Hyperbranched Polyamine Matrix

Silver nanoparticles have been prepared in a polyacrylamide (PA) matrix, as well as in the presence of a hyperbranched polyamine/polyacrylamide combined system (HB‐PA) by using a reductive technique. The stability of colloidal solution of silver nanoparticles is higher (5 months) in combined matrix compared to PA alone (4 months). The prepared silver nanoparticles were characterized by different spectroscopic and analytical techniques such as FTIR, UV‐visible, X‐ray diffraction, TEM etc. TEM and XRD studies confirmed the formation of well‐dispersed nanoparticles with an average size of 9.91 nm and 8.5 nm for PA and HB‐PA matrices, respectively. The antibacterial activity of silver nanoparticles in both the matrices was tested against Bacillus Subtilis bacteria by using the diffusion disc technique. The result shows that the antibacterial activity of the active agent, Ag(0) is a little higher in the case of HB‐PA system. The dielectric constant of the matrices decreases with an increase in frequency, but the values increase with an increase of concentration of silver nanoparticles in PA matrix.     

Adsorption and Equilibrium Isotherm Study of Removal of Copper (II) Ions from Aqueous Solution by Chemically Modified Abelmoschus esculentus Fibers

The present study explores surface modification of Abelmoschus esculentus by graft copolymerization reaction using acrylonitrile as a monomer and ascorbic acid/H₂O₂ as a redox initiator. Further, polyacrylonitrile grafted fibers were treated with hydroxylamine to convert the nitrile group of the grafted fiber into the amidoxime group to enhance adsorption of copper ions from wastewater. The graft copolymers and amidoximated fibers were characterized by FT-IR and FE-SEM. The effects of physicochemical parameters such as pH of the solution, initial metal ion concentration, and time on Cu(II) adsorption were studied to optimize condition for maximum adsorption. In addition, Langmuir, Freundlich, and Tempkin models were applied to describe the adsorption isotherm of Cu²⁺ ions.     

Poly-hydroxamic acid (PHA) matrix for gadolinium pre-concentration and removal

A novel hydrophilic, three dimensionally cross-linked, aliphatic backbones with pendant hydroxamic acid (HA) group as functional moiety has been synthesized and utilized targeting removal of gadolinium [Gd(III)] from laboratory waste aqueous effluent. To understand the nature of sorption, gadolinium solution of various concentrations viz., 20, 10, 5.0, 1.0, 0.5 and 0.1 ppm has been contacted with a dose rate of 1 g/100 mL for 2 h. In this study, ICP-AES has been used for determination of concentration (ppm) of gadolinium in feed, filtrate and elute. EDXRF study also ensures the presence of gadolinium in the respective medium. Loaded gadolinium matrix was eluted with 1 N HCl for determining the elution factor (0.98).