Synthesis,characterization, X-ray structural analysis and study of oxidative properties of propyltriphenylphosphonium bromochromate

The complex of propyltriphenylphosphonium bromochromate(VI), PrPh₃P[CrO₃Br] is easily synthesized in nearly quantitative yield using a direct reaction of chromium(VI) oxide and propyltriphenylphosphonium bromide. This compound is a versatile reagent for the efficient and selective oxidation of organic substrates, in particular for alcohols to their corresponding aldehydes or ketones, under mild conditions. This compound was characterized by IR, UV/Visible, ¹³C-n.m.r. and ¹H-n.m.r. techniques. It crystallized in the monoclinic form and its crystal and molecular structure have been determined by X-ray crystallography.     

Influence of conjugated nitrogenous bases on the spectra and structure of mixed-ligand nickel(II) chelates containing β-diones

The infrared and electronic excitation spectra of a series of new nickel(II) chelates containing an-diimine (or nitrogenous base, enR) and the anion of a-dione (1,3-ketoenol or 1,3-ketoester,H) were obtained in the solid state and in solution. The composition and the overall structure of the new chelates in the solid state depends on ligand concentration, the substituents within the-dionato moiety and the counterion present. The IR and electronic excitation spectra of [Ni(enR)₂ ]NO₃ and [Ni(enR)(O₂NO)] indicate, in conjunction with other physicochemical measurements, bidentate coordination of the ligands, while the spectral shifts reveal replacement of the (O,O)nitrato group by basic solvents. The existence of the nickel(II) in an octahedral environment is confirmed by an X-ray structure analysis of [Ni(dpamH)₂acac]NO₃ · CH₃OH (monoclinic, space groupP2_l/n, a=17.296(1),b=7.462(1),c=21.604(3) å,=95.65(1),Z=4, R=0.0534,Rw=0.0600), where dpamH denotes the 2,2-dipyridylamine.     

Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

Effect of Ultrasonic‐assisted Preparation Methods on Structure,Morphology and Optical Properties of Nanosized Cupric Oxide

Cupric oxide is a p‐type semiconductor with a narrow band‐gap which is suitable for catalysis, electrochemical cells, field emission devices and gas sensor applications. Despite considerable efforts devoted to the preparation of the nanosized CuO, there is a lack of information about ultrasonic‐assisted (US) preparation methods. Nanosized cupric oxide was successfully prepared through different ultrasonic‐assisted (US) preparation methods. Furthermore, the influence of preparation method on the structure, morphology and optical properties of nanosized CuO has been reported. XRD patterns were identical to the single‐phase pure CuO with a monoclinic structure. The enhancement of the crystallinity and crystallite size was observed for the sample prepared through the US thermal decomposition. The absorption band of CuO nanocrystals prepared through the US liquid hydrolysis shows a clear red shift of about 40 nm compared to those obtained with other preparation methods. Our results indicated that almost spherical CuO nanoparticles with an average size of 65 nm were prepared during the US thermal decomposition, while CuO rod‐like nanostructures with an average diameter of about 16 nm were obtained via the US liquid hydrolysis method. The band gap values of nanosized CuO samples were larger than the reported value for the bulk CuO. Synthesized CuO samples by US methods with adjustable and controllable properties make the applicability of cupric oxide even more versatile.     

Enhancement of microbial quality and inactivation of pathogenic bacteria by gamma irradiation of ready-to-cook Iranian barbecued chicken

Ready-to-cook Iranian barbecued chicken consists of cubed chicken breast, lemon juice, salt, red pepper, onion, saffron and vegetable oil with an overall pH value of about 5.5. This product is sometimes consumed under-cooked, hence it may pose health hazards to consumers when contaminated with food-borne pathogens. In this study, the effect of gamma irradiation (0, 1.5, 3 and 4.5 kGy) on the microbial quality of ready-to-cook (RTC) barbecued chicken samples stored at 4 °C for 15 days was investigated. Moreover, the effectiveness of irradiation for inactivating Listeria monocytogenes, Escherichia coli O157:H7 and Salmonella typhimurium inoculated into the samples was also studied. Irradiation of the samples resulted in dose dependent reduction in counts of aerobic mesophilic bacteria, yeasts and molds, Enterobacteriaceae and lactic acid bacteria. Among the microbial flora, yeasts and molds and Enterobacteriaceae were more sensitive to irradiation and got completely eliminated at dose of 3 kGy. D₁₀ values of L. monocytogenes, E. coli O157:H7 and S. typhimurium inoculated into the samples were 0.680, 0.397 and 0.601 kGy, respectively. An irradiation dose of 3 kGy reduced the counts of E. coli O157:H7 to an undetectable level in RTC barbecued chicken but was ineffective on elimination of L. monocytogenes and S. typhimurium. However, none of the food-borne pathogens were detected in the samples irradiated at 4.5 kGy. This study showed that irradiation had no undesirable effects on the initial sensory attributes of barbecued chicken. At the end of the storage period, irradiated samples were more acceptable compared to non-irradiated ones.     

Effect of different blend compositions on properties of low-density polyethylene/ethylene vinyl alcohol/clay toward high oxygen barrier nanocomposite films

In this study, high oxygen barrier nanocomposite films were prepared by melt blending of low-density polyethylene/ethylene vinyl alcohol/nanoclay/polyethylene-grafted-maleic anhydride (LDPE/EVOH/nanoclay/LDPE-g-MA). Effect of each component presence was determined by using Box-Behnken experiment design methodology. For all the responses obtained, R ² was between 0.956 and 0.981 indicating a very good fitting of the experimental data with the response surface method (RSM) in the models. Oxygen transfer rate (OTR) results shown that the addition of EVOH, compatibilizer, and nanoclay in formulations significantly decreases oxygen permeability. The experimental results showed that addition of 30 wt % EVOH, 4 wt % nanoclay, and 5 wt % LDPE-g-MA to the LDPE matrix gave the best oxygen barrier properties. The crystallization behaviors of the samples and thermal analysis have been characterized by using differential scanning calorimetry (DSC). The addition of nanoclay to the blends has resulted in increased crystallinity of LDPE phase. The state of nanoclay dispersion in the samples was examined by the X-ray diffraction (XRD) tests. The reduction of EVOH and nanoclay content, as well as the increase of LDPE-g-MA, has resulted in the better dispersion of nanoclay in the polymer matrix. The morphology of specimens was observed by using energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM).     

Preparation and properties of semiconductor CuO nanoparticles via a simple precipitation method at different reaction temperatures

Preparation and properties of CuO nanoparticles as an important p-type semiconductor via a simple precipitation method at different reaction temperatures varying from 10 to 115°C using copper acetate as a starting material have been reported. In addition, we investigated the influence of the ultrasonic irradiation through synthesizing the nanosized CuO at 60°C. Samples were characterized by XRD, FT-IR, SEM, TEM and UV-Vis techniques. XRD patterns of samples were identical to the single-phase pure CuO with a monoclinic structure. FT-IR spectra exhibited sharp peaks at around 519 and 598?cm^?1 which can be assigned to vibrations of the Cu-O bond. Results indicated that properties of samples had great dependence on the temperature and ultrasonic irradiation. The crystallite size and crystallization increased with increasing the temperature from 10 to 115°C. The band gap of samples was estimated to be in the range of 1.9–2.9?eV that is larger than the reported value for the bulk CuO (1.85?eV). This study provides a simple method for the preparation of nanosized CuO with a better surface uniformity and a narrow size distribution. Synthesized CuO samples with adjustable and controllable optical properties make the applicability of copper oxide even more versatile.