Investigation of endoglucanase selectivity on carboxymethyl cellulose by mass spectrometric techniques

The benefits of applying cellulose selective enzymes as analytical tools for chemical structure characterization of cellulose derivatives have been frequently addressed over the years. In a recent study the high selectivity of cellulase Cel45A from Trichoderma reesei (Tr Cel45A) was utilized for relating the chemical structure to the flow properties of carboxymethyl cellulose (CMC). However, in order to take full advantage of the enzymatic hydrolysis the enzyme selectivity on the cellulose substrate must be further investigated. Therefore, the selectivity of Tr Cel45A on CMC was studied by chemical sample preparation of the enzyme products followed by mass spectrometric chemical structure characterization. The results strongly suggest that, in accordance with recent studies, also this highly selective endoglucanase is able to catalyze hydrolysis of glucosidic bonds adjacent to mono-substituted anhydroglucose units (AGUs). Furthermore, the results also indicate that substituents on the nearby AGUs will affect the hydrolysis.     

Pulsed TEA CO2 Laser Irradiation of Titanium in Nitrogen and Carbon Dioxide Gases

Surface changes created by interaction of transversely excited atmospheric carbon dioxide (TEA CO₂) laser with titanium target/implant in nitrogen and carbon dioxide gas were studied. TEA CO₂ laser operated at 10.6 μm, pulse length of 100 ns and fluence of ∼17 J/cm² which was sufficient for inducing surface modifications. Induced changes depend on the gas used. In both gases the grain structure was produced (central irradiated zone) but its forms were diverse, (N₂: irregular shape; CO₂: hill-like forms). Hydrodynamic features at peripheral zone, like resolidified droplets, were recorded only in CO₂ gas. Elemental analysis of the titanium target surface indicated that under a nitrogen atmosphere surface nitridation occurred. In addition, irradiation in both gases was followed by appearance of plasma in front of the target. The existence of plasma indicates relatively high temperatures created above the target surface offering a sterilizing effect.

     

Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of partially depolymerised methyl cellulose

Methyl cellulose (MC) was partially depolymerised and the oligomers thus obtained were studied by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised MC were collected from size-exclusion chromatography and subjected to a sample preparation investigation. Several MALDI matrices and solvents were evaluated. The results showed that the solvent choice had a significant effect on the measured degree of substitution (DS). Aprotic solvents produced higher DS values, which was most likely due to poor solubility of species with low DS. The obtained signal intensity, however, did not correlate with the solubility but seemed to be more dependent on certain matrix/solvent combinations. All the matrices attempted produced mass spectra with sufficient signal intensity for accurate peak area calculation. The choice of matrix did not have any significant effect on the measured DS. Sample spots obtained from organic solvents had a more homogeneous distribution of the analyte and smaller crystals than those obtained from water. This increased both the reproducibility and peak resolution and in addition the analysis time was shorter. DS measurements were performed on two acidically depolymerised MCs with different nominal DS values. It was easy to distinguish between the two MCs, and the measured DS values agreed well with the values supplied by the manufacturers.     

Surface modification of the titanium implant using TEA CO2 laser pulses in controllable gas atmospheres - Comparative study

Interaction of a TEA CO₂ laser, operating at 10.6 μm wavelength and pulse duration of 100 ns (FWHM), with a titanium implant in various gas atmospheres was studied. The Ti implant surface modification was typically studied at the moderate laser beam energy density/fluence of 28 J/cm² in the surrounding of air, N₂, O₂ or He. The energy absorbed from the TEA CO₂ laser beam is partially converted to thermal energy, which generates a series of effects, such as melting, vaporization of the molten material, shock waves, etc. The following titanium implant surface changes and phenomena were observed, depending on the gas used: (i) creation of cone-like surface structures in the atmospheres of air, N₂ and O₂, and dominant micro-holes/pores in He ambient; (ii) hydrodynamic features, most prominent in air; (iii) formation of titanium nitride and titanium oxide layers, and (iv) occurrence of plasma in front of the implant. It can be concluded from this study that the reported laser fluence and gas ambiences can effectively be applied for enhancing the titanium implant roughness and creation of titanium oxides and nitrides on the strictly localized surface area. The appearance of plasma in front of the implants indicates relatively high temperatures created above the surface. This offers a sterilizing effect, facilitating contaminant-free conditions.     

Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of partially depolymerised carboxymethyl cellulose

Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS) of partially depolymerised carboxymethyl cellulose (CMC) have been investigated. The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised CMC were collected from size-exclusion chromatography (SEC) and further investigated by MALDI-TOFMS. 2,5-Dihydroxybenzoic acid was used as matrix, dissolved in H(2)O due to the poor solubility of CMC in suitable organic solvents. The samples were dried by two methods, in ambient atmosphere and at reduced pressure. Under reduced pressure the sample spot homogeneity increased. This drying method, however, produced additional adduct peaks in the mass spectra originating from ion exchange on the CMC oligomers. Analysis of CMC could be performed in both negative and positive ion modes. Mass discrimination and variation in ionisation efficiency were demonstrated by comparing mass spectra with SEC data. Measurements of the degree of substitution (DS) were performed on three CMCs with different DS values, which were depolymerised in trifluoroacetic acid. The three CMCs were easily distinguished from one another, but the obtained DS values deviated from the values supplied by the manufacturer.     

Improved matrix-assisted laser desorption/ionisation sample preparation of a partially depolymerised cellulose derivative by continuous spray deposition and interfacing with size-exclusion chromatography

Continuous spray deposition (CSD) of aqueous solutions of partially depolymerised methyl cellulose was found to improve matrix-assisted laser desorption/ionisation (MALDI) sample preparation. One feature was that the sensitivity in MALDI time-of-flight mass spectrometry increased up to an order of magnitude compared with the standard sample preparation method. Another feature was that CSD provided targets for MALDI with homogeneously distributed analyte. This resulted in a more even signal intensity and a higher reproducibility than in the standard method. High-mass discrimination was more pronounced in CSD than in the standard method. Size-exclusion chromatography with aqueous eluent was coupled online to CSD onto matrix-precoated foils. The suitability for determination of the molar mass distribution of methyl cellulose was investigated.     

A spectroscopic investigation of stabilized dc argon arc at atmospheric pressure by power modulation technique

Spatial distribution of delayed responses of argon and hydrogen spectral line and continuum intensity to square power modulation was investigated in order to get better insight into the processes occurring in argon dc arc plasma. The power was abruptly changed between stationary values, 9 and 3.5 A. For these currents steady state radial distributions of electron number density, temperature and emission intensity were measured. On part of the discharge radial profiles the power drop and the power jump are both accompanied by intensity peaks which may be explained by displacement of the arc core axis and change in the arc core diameter during the power modulation.     

The Effect of Background Gas on the Excitation Temperature and Electron Number Density of Basalt Plasma Induced by 10.6 Micron Laser Radiation

Plasma Chemistry and Plasma Processing - Time-integrated optical emission spectroscopy was applied for the analysis of emission spectra, and determination of electron densities and excitation...     

Influence of picosecond laser pulses on the microstructure of austenitic materials

We investigate samples of austenitic materials ?C stainless steel and iron-based superalloy ?C which are widely used at high temperatures and pressures. The samples were exposed to Nd³⁺:YAG laser pulses with a wavelength of 1064 nm and a pulse duration of 170 ps. We employ different pulse energies and number of pulses. The spots appearing after the laser irradiation were examined by optical and scanning electron microscopy and analyzed by energy-dispersive spectroscopy. We also perform Vickers microhardness tests. We discuss the microstructure changes caused by different energy and number of pulses in air and in a He-enriched atmosphere with the aim to determine optimum laser parameters in surface-treatment technology.