One-carbon homologation of carboxylic acids via BtCH(2)TMS: a safe alternative to the Arndt--Eistert reaction

Carboxylic acids are converted into the corresponding homologated acids or esters, using easily available 1-(trimethylsilylmethyl)benzotriazole (1) as a one-carbon synthon. The effectiveness of the reaction has been investigated on six aryl and seven alkyl carboxylic acids.     

Asphaltene self-association and water-in-hydrocarbon emulsions

The configuration of asphaltenes on the water-oil interface was evaluated from a combination of molar mass, interfacial tension, drop size distribution, and gravimetric measurements of model emulsions consisting of asphaltenes, toluene, heptane, and water. Molar mass measurements were required because asphaltenes self-associate and the level of self-association varies with asphaltene concentration, the resin content, solvent type, and temperature. Plots of interfacial tension versus the log of asphaltene molar concentration were employed to determine the average interfacial area of asphaltene molecules on the interface. The moles of asphaltenes per area of emulsion interface were determined from the molar mass data as well as drop size distributions and gravimetric measurements of the model emulsions. The results indicate that asphaltenes form monolayers on the interface even at concentrations as high as 40 kg/m(3). As well, large aggregates with molar masses exceeding approximately 10,000 g/mol did not appear to adsorb at the interface. The area occupied by the asphaltenes on the interface was constant indicating that self-associated asphaltenes simply extend further into the continuous phase than nonassociated asphaltenes. The thickness of the monolayer ranged from 2 to 9 nm.     

Spectrothermal investigation of the decomposition course of lanthanum acetate hydrate

Thermogravimetry, differential thermal, X-ray diffraction and infrared spectroscopy analyses showed La(CH₃COO)₃·1.5H₂O to decompose completely at 700°C yielding La₂O₃. The results revealed that the compound dehydrates in two steps at 130 and 180°C, and recrystallizes at 210°C. Water thus produced hydrolyzes surface acetates (at 310°C), releasing acetic acid into the gas phase. At 334°C, the anhydrous acetate releases gas phase CH₃COCH₃ to give La₂(CO₃)₃ residue, which decomposes to La₂O₂(CO₃) via the intermediate La₂O(CO₃)₂. On further heating up to 700°C, La₂O₃ is formed. IR spectroscopy of the gaseous products indicated a chemical reactivity at gas/solid interfaces formed throughout the decomposition course. As a result, CH₃COCH₃ was involved in a surface-mediated, bimolecular reaction, releasing CH₄ and C₄H₈ (isobutene) into the gas phase. Non-isothermal kinetic parameters, the rate constantk, frequency factorA, and activation energy ΔE, were calculated on the basis of temperature shifts experienced in the thermal processes encountered, at various heating rates (2–20 deg·min^?1).     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Reaction of 9-diazo-4-azafluorene with unsaturated compounds and cyclic ketones

Spiro[4-azafluorene-9,1 cyclopropanes] were obtained by the reaction of 9-diazo-4-azafluorene with various alkenes in the form of a mixture of geometrical isomers differentiated according to the position of the substituents in the cyclopropane ring and also also according to position relative to the pyridine ring. In the reaction of 9-diazo-4-azafluorene with cyclopentanone, di(4-azafluorene-9 nyl) oxide is formed, while from its reaction with cyclohexanone, 2-oxo-spiro[4-azafluorene-9,1-cycloheptane] is obtained.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 495–501, April, 1990.