Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Studies on the liquid-liquid extraction and ion and precipitate flotation of Co(II) with decanoic acid

The liquid-liquid extraction, ion and precipitate flotation of Co(II) from chloride media of 1·10^–4M initial Co(II) concentration and =0.1 have been investigated using decanoic acid and the results are compared. Organic solvents used were chloroform in the case of liquid-liquid extraction and ethanol (used as a solvent for the collector and a frother) in the case of flotation. From the results it appears that liquid-liquid extraction takes place through the formation of the complex: (CoR₂)₂(HR)₂ but flotation occurs through the formation of a surface active product which has the empirical formula CoR₂. The effects of pH and of decanoic acid concentration on the three separation processes were also investigated and the results discussed. Good agreement was observed between the experimental precipitate flotation curves and the theoretical curve calculated from the data published for Co(II) hydrolysis.     

Separation of Co(II) from dilute aqueous solutions by precipitate and adsorbing colloid flotation

Ion, precipitate and adsorbing colloid flotation of cobalt(II) have been investigated at different pH values, using N-dodecylpyridinium chloride (DPCl), A strong cationic surfactant, and sodium lauryl sulfate (NaLS), a strong anionic surfactant, as collectors. In case of adsorbing colloid flotation, hydrous manganese dioxide was used as an adsorbent. The precipitate flotation curves experimentally obtained with the two tested collectors were compared with the corresponding theoretical one calculated from the data published for Co(II) hydrolysis. The effects of the collector concentration, ageing of the water-MnO₂–Co(II) system, bubbling time period, cobalt(II) concentration and foreign salts on the percent removal of Co(II) by adsorbing colloid flotation using DPCl as collector were determined. Removals approaching 100% could be achieved under the optimum conditions.     

Kinetic studies on the foam separation of thorium (IV) with sodium lauryl sulphate

Summary The effects of pH, gas flow rate and collector concentration on the rate of thorium removal by foaming with sodium lauryl sulphate have been investigated. The obtained data indicate that only aged hydrated thorium oxide is removed by a flotation mechanism. All the other colloidal and condensed thorium species as well as the colloidal sublates which are formed between the dissolved thorium species and the collector anions appear to be removed by partition and their removal rates could be described by a reversible first-order rate equation. The obtained results are discussed in terms of thorium hydrolysis.

---

Zusammenfassung Der Einfluß der pH-Werte, Gasdurchflußmengen und Kollektor-Konzentration auf die Geschwindigkeit der Entfernung des Thoriums durch Schaumbildung mit Natrium-Lauryl-Sulfat wurde untersucht. Die Ergebnisse zeigen, daß das gealterte, wässerige Thoriumoxid durch Flotations-Mechanismen entfernt wird. Die anderen kolloidalen und kondensierten Thorium-Spezien und auch die Kolloidalprodukte, die durch Reaktionen zwischen den gelösten Thoriumspezien und den Kollektor-Anionen formiert sind, sind durch die Verteilung entfernt worden. Die Entfernungsgeschwindigkeit kann beschrieben werden durch eine reversible 1. Ordnungs-Gleichung. Die Ergebnisse werden in Abhängigkeit einer ThoriumHydrolyse diskutiert.

---

---

With 7 figures     

3,4-Dicyano-5-aminopyrazole complexes of anhydrous divalent transition metal chlorides and their triphenylphosphine derivatives

Summary 3,4-Dicyano-5-aminopyrazole, H3,4(CN)₂5NH₂pz (L) reacts either with anhydrous MCl₂ or with [M(PPh₃)₂Cl₂] to yield ML₄Cl₂ complexes (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd or Hg), whose monomeric and covalent natures have been confirmed by their solubility in most non-polar solvents and their low electrical conductivities. The bonding mode of substituted pyrazole is inferred from the position of the (C-N) band in the i.r. spectra. The electronic spectra and the magnetic moments of these compounds were recorded.     

Synthesis and characterization of adducts of dichlorosulphato bis(1,3-propylenediamine)metal(II) complexes with dialkyltin dichlorides

Summary Adducts of dichlorosulphato bis(1,3-propylenediamine)-metal(II) complexes with dialkyltin dichlorides, [R₂Sn(MeCN) ₂]₂[M(NH(CH₂)₃NH)₂(SO₃Cl)₂] (M = Cr, Fe, Co, Ni or Cu; R = Me or n-Bu) have been prepared. The positive shift in the symmetric SO₃ stretch and splitting of the doubly degenerate (E) modes in their i.r. spectra suggest a covalent linkage for the SO₃Cl^– group. The adducts are non-electrolytes; magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, generating an octahedral geometry around the metal ions, except for Ni^II where tetragonal distortion is observed.Author to whom all correspondence should be directed.     

Ethylenediamine complexes of transition metalbis(chlorosulphates)

Summary The number and positions of the i.r. active modes in ethylenediamine complexes of M(SO₃Cl)₂ (M = Mn, Fe, Co, Ni or Cu) suggest that the SO₃Cl^– anion is covalently bound in these non-electrolytic complexes. Magnetic moments and ligand field data suggest that each SO₃Cl^– group is monodentate, giving an octahedral geometry around the metal ions.