Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

Quantitative determination of Malathion in pesticide by modified attenuated total reflectance-Fourier transform infrared spectrometry applying genetic algorithm wavelength selection method

A simple and environment friendly method was developed for determination of Malathion content of analytical and commercial insecticide samples with no special preparation. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were characterized and 1000-2000 cm⁻¹ region was selected for quantitative analysis utilizing partial least square (PLS) and two wavelength selection methods: (a) principal component regression (PCR) and (b) genetic algorithm (GA). Relative error of prediction (REP) was calculated in PLS, PCR-PLS and GA-PLS methods and was 3.536, 1.656 and 0.188, respectively. Proposed method is successfully applicable for quantification of Malathion in commercial grade samples and reliable results in comparison with known methods, confirms this idea.     

Application of headspace solvent microextraction to the analysis of mononitrotoluenes in waste water samples

The possibility of applying headspace solvent microextraction (HSME) for determination of mononitrotoluenes (MNTs) in waste water samples is demonstrated. A drop of n-amyl alcohol containing naphthalene as an internal standard was suspended from the tip of a microsyringe needle over the headspace of stirred sample solutions for a predescribed extraction period. The drop was then injected directly into a gas chromatograph. Optimization of experimental parameters such as the nature of extracting solvent, microdrop and sample volumes, sampling temperature, stirring rate, ionic strength of the solution, pH and extraction time on HSME efficiency were investigated. Then enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with MNTs. Finally, the method was successfully applied to the extraction and determination of the mononitrotoluenes in waste waters of both P.C.I. Company and Research Center of Azad University.     

Synthesis,Characterization, and an ab initio Study of a Manganese(II) Macrocyclic Schiff-Base Complex with Two 2-Aminoethyl Pendant Arms

The cyclocondensation of 2,6-diformylpyridine with N,N,N,N-tetrakis(2-aminoethyl)ethane-1,2-diamine (pentene) in the presence of Mn^II forms the [1 + 1] pendant arm Schiff-base macrocyclic complex, [MnL³]²⁺. The ligand is a 15-membered pentaaza macrocycle having two 2-aminoethyl pendant arms {L³= 6,9-bis(aminoethyl)-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,16-pentene}. The complex, investigated by analytical, spectroscopic and magnetic techniques, supports the formation of a highly symmetrical pentagonal bipyramid complex with the Mn^II ion located within a pentaaza macrocycle and two pendant amines coordinating on opposite sides of a plane defined by the macrocycle and the metal ion. The structure of the complex was also verified by ab initio HF-MO calculations using a standard 3-21G basis set.     

Investigation and comparison of biological effects of regioselectively synthesized thiazole derivatives

In this study, anticancer, antibacterial (against hospital-isolated antibiotic-resistant Escherichia coli strains), antifungal, and antioxidant effects of synthesized heterocyclic compounds 5 and 7 containing thiazole core were examined. Cytotoxicity testing was utilized against MCF-7 breast cancer cells via MTT cell viability assay. Antibacterial and antifungal activities were checked out according to Clinical and Laboratory Standards Institute (CLSI) guidelines, and antioxidant properties were evaluated through scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals. Results showed the viability of breast cancer cell lines was reliant on concentration of heterocycles and time of incubation. Synthetic compounds exhibited excellent antibacterial and antifungal properties base on their minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimum fungicidal concentration (MFC) values as well as high antioxidant activities according to their IC₅₀ values. Higher anticancer and antibacterial properties were observed with compound 7; on the contrary, thiazole 5 had better antioxidant effects. They can be introduced as potent antimicrobial, antioxidant, and anticancer agents.     

Design and fabrication of a Fourier transform spectrometer by means of thermally actuated tunable grating

In this article, the design and fabrication of a Fourier transform spectrometer, based on a thermally actuated tunable grating, are presented. Grooves of a binary grating are filled with nitrobenzene, the refractive index of which highly depends on temperature. Through the application of heat, the temperature of the nitrobenzene is changed, which in turn changes the efficiency of the grating. To measure the spectrum of a light beam, the light under inspection is first passed through the grating and the intensity of the zero order of diffraction is recorded as a function of temperature. Next, the Fourier transform of the measured data is calculated. The resolution of the spectrometer is also discussed. Finally, a micro-spectrometer that is based on a thermally actuated grating is proposed.     

Fabrication of a passive 3D mixer using CO2 laser ablation of PMMA and PDMS moldings

In this article a novel method for the fabrication of a passive 3D mixer is presented. It has been shown that in CO2 laser ablation of Polymethyl Methacrylate (PMMA), bending and straight cone structures can be fabricated by adjusting the laser scanning parameters. The effect of the bending cones in the flow direction of a fluid is discussed with computer simulation and a passive mixer based on such structures is designed. Bending and straight cones are fabricated on a PMMA substrate using CO2 laser ablation technique. The structure is molded with PDMS to make two half-channels with bending and straight cones extending out of the surface. Two PDMS structures are stacked on top of each other with a certain displacement to fabricate the mixer.     

Photoelectrocatalytic degradation of 3-nitrophenol at surface of Ti/TiO2 electrode

The widely utilization of phenol and its derivatives such as 3-nitrophenol (3-NP) has led to the worldwide pollution in the environment. In this study, Ti/TiO₂ photoelectrode was prepared with anodic oxidation of Ti foil electrode and then the photoelectrocatalytic (PEC) degradation of 3-NP was performed via this electrode, comparing with photocatalytic (PC), electrooxidation and direct photolysis by ultraviolet light. A significant photoelectrochemical synergetic effect in 3-NP degradation was observed on the Ti/TiO₂ electrode and rate constant for the PEC process of Ti/TiO₂ electrode was about three times as high as its PC degradation process. 3-NP concentration monitoring was carried out with differential pulse voltammetry. Results showed that PEC degradation has highest effect on concentration decreasing of 3-NP at solution and degraded it about 38 %, while other processes degradation efficiencies were about 4, 7, and 12 % for electrooxidation, direct photolysis and photocatalytic degradation, respectively. Finally, effects of solution pH and applied potential on degradation efficiency were studied and results showed that optimum pH for degradation is equal 4.00 and optimum potential is 1.2 V vs. Ag|AgCl|KCl (3M) reference electrode.     

Preparation, nano purification, quality control and labeling optimization of [64Cu]-5,10,15,20-tetrakis (penta fluoro phenyl) porphyrin complex as a possible imaging agent

Cu-64 was produced via the ⁶⁸Zn (p,αn)⁶⁴Cu nuclear reaction (≈200 mCi, >95 % chemical yield at 180 μA for 1.1 h irradiation, (radionuclidic purity >96 %, copper-67 as impurity) followed by purification with amino functionalized nano magnetic oxide, Fe₃O₄ aiming to remove trace amount of heavy metal ions from aqueous media due to achieve ultra pure [⁶⁴Cu] CuCl₂ for labeling step. [⁶⁴Cu] labeled 5,10,15,20-tetrakis(penta fluoro phenyl) porphyrin ([⁶⁴Cu]-TFPP) was prepared using freshly prepared [⁶⁴Cu] CuCl₂ (Cu-64; T _1/2 = 12.7 h) and 5,10,15,20-tetrakis(penta fluoro phenyl)porphyrin (H₂TFPP) for 60 min at 100 °C under reflux condition (radiochemical purity: >97 % ITLC, >98 % HPLC, specific activity: 14–16 GBq/mmol). Stability of the complex was checked in final formulation and human serum for 24 h. The partition coefficient was calculated for the compound (log P = 0.73). The biodistribution of the labeled compound in vital organs of wild-type rats was studied using scarification studies and PET imaging up in 2 and 4 h after injection. A detailed comparative pharmacokinetic study performed for ⁶⁴Cu cation and [⁶⁴Cu]-TFPP. The complex is mostly washed out from the circulation through kidneys and liver and can be an interesting tumor imaging/targeting agent due to high specific uptake and rapid excretion through the urinary tract.     

Mononuclear copper(II) complexes of bis-triazole-based macrocyclic Schiff base hydrazones: direct synthesis,EPR studies,magnetic and thermal properties

Mononuclear copper(II) complexes of 1,2,4-triazole-based Schiff base macrocyclic hydrazones, III and IV, have been reported. The prepared amorphous complexes have been characterized by spectroscopic methods, electron spray ionization mass spectrometry, and elemental analysis data. Electrochemical studies of the complexes in DMSO show only one quasi-reversible reduction wave at +0.43 V (ΔE = 70 mV) and +0.42 V (ΔE = 310 mV) for III and IV, respectively, which is assigned to the Cu(II) → Cu(I) reduction process. Temperature dependence of magnetic susceptibilities of III and IV has been measured within an interval of 2–290 K. The values of χ_M at 290 K are 1.72 × 10^?3 cm³ mol^?1 and 1.71 × 10^?3 for III and IV, respectively, which increases continuously upon cooling to 2 K. EPR spectra of III and IV in frozen DMSO and DMF were also reported. The trend g_|| > g⊥ > g_e suggests the presence of an unpaired electron in the d_x2?y2 orbital of the Cu(II) in both complexes. Furthermore, spectral and antimicrobial properties of the prepared complexes were also investigated.