Multiple silicon-hydrogen bond activations at adjacent rhodium and iridium centers

The reaction of 1 equiv of primary silanes, SiH(3)R (R = Ph, Mes), with [RhIr(CO)(3)(dppm)(2)] yields mono(silylene)-bridged complexes of the type [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (R = Ph or Mes), while for R = Ph the addition of 2 equiv yields the bis(silylene)-bridged complexes, [RhIr(CO)(2)(μ-SiHPh)(2)(dppm)(2)]. The kinetic isomer of this bis(silylene)-bridged product has the phenyl substituent axial on one silylene unit and equatorial on the other, and in the presence of excess silane this rearranges to the thermodynamically preferred "axial-axial" isomer, in which the phenyl substituents on each bridging silylene unit are axial and parallel to one another. The reaction of 1 equiv of diphenylsilane with [RhIr(CO)(3)(dppm)(2)] produces the mono(silylene)-bridged product, [RhIr(H)(2)(CO)(2)(μ-SiPh(2))(dppm)(2)], and the subsequent addition of silane in the presence of CO yields the silyl/silylene product [RhIr(H)(SiPh(2)H)(CO)(3)(κ(1)-dppm)(μ-SiPh(2))(dppm)]. The reaction of [RhIr(CO)(3)(dppm)(2)] with 2 equiv of SiH(2)Me(2) yields the analogous product [RhIr(H)(SiMe(2)H)(CO)(3)(κ(1)-dppm)(μ-SiMe(2))(dppm)]. Low-temperature NMR spectroscopic observation of some key intermediates, such as [RhIr(H)(SiH(2)Ph)(CO)(2)(μ-CO)(dppm)(2)], formed during the formation of the mono(silylene)-bridged species provides evidence for a mechanism involving initial Si-H bond activation at Rh, followed by the subsequent Si-H bond activation at Ir. The Si-H bond activation of a second equivalent of silane seems to be initiated by dissociation of the Rh-bound end of one diphosphine. The reaction of diphenylsilane with the cationic complex [RhIr(CH(3))(CO)(2)(dppm)(2)][CF(3)SO(3)] gives rise to a different reactivity pattern in which Si-H bond activation is initiated at Ir. In this case, the cationic silyl-bridged species, [RhIr(CH(3))(CO)(2)(κ(1):η(2)-SiHPh(2))(dppm)(2)][CF(3)SO(3)], contains an agostic Si-H interaction with Rh. In solution, at ambient temperature, this complex converts to two species, [RhIr(H)(COCH(3))(CO)(μ-H)(μ-SiPh(2))(dppm)(2)][CF(3)SO(3)] and [RhIr(CO)(2)(μ-H)(μ-SiPh(2))(dppm)(2)] [CF(3)SO(3)], formed by the competing methyl migration to CO and reductive elimination of methane, respectively. In the diphenylsilylene dihydride product, a weak interaction between the bridging silicon and the terminal Ir-bound hydride is proposed on the basis of NMR evidence.     

Graphical Representations of Speed: Obstacles Preservice K‐8 Teachers Experience

This study examines the difficulties college students experience when creating and interpreting graphs in which speed is one of the variables. Nineteen students, all preservice elementary or middle school teachers, completed an upper‐level course exploring algebraic concepts. Although all of these preservice teachers had previously completed several mathematics courses, including calculus, they demonstrated widespread misconceptions about the variable speed. This study identifies four cognitive obstacles held by the students, provides excerpts of their graphical constructions and verbal interpretations, and discusses potential causes for the confusion. In particular, misconceptions arose when students interpreted the behavior and nature of speed within a graphical context, as well as in situations where they were required to construct a graph involving speed as a variable. The study concludes by offering implications for the teaching and learning of speed and its interpretation within a graphical setting.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

Oxidation of organic compounds by hydrogen peroxide using polymer-anchored azo-metal catalysts

Polymer-anchored azo complexes of Cu(II) and Ni(II) were synthesized by the reaction of chloromethylated polystyrene, 3-aminophenol, and 1-nitroso-2-naphthol with the metal chlorides. The catalytic activities of these complexes were studied in the oxidation of various organic substrates including alkenes, alcohols, alkanes, and sulfides with 30 % aqueous hydrogen peroxide. The structures of both catalysts have been investigated by physiochemical methods. Both catalysts proved to be very stable and could be reused more than five times without significant loss of activity. Furthermore, these catalysts require very mild reaction conditions.     

A rapid technique to determine the internal area function of finite-length ducts using maximum length sequence analysis

This paper describes a rapid technique for reconstruction of the internal area function of a duct using blockage-induced eigenvalue shifts determined from eigenfrequencies measured under two sets of duct termination boundary conditions. A single broad band maximum length sequence (MLS) measurement of short duration is utilized to obtain the transfer function of the duct, which in turn can be utilized to determine its eigenvalue shifts and subsequently its internal area function using an inverse perturbation technique. The reconstruction results display the same order of accuracy as those obtained previously using swept sine measurements of extended duration. An expression for the determination of the area function is presented utilizing resonant frequency information alone, thus rendering duct length determination unnecessary. A computational routine further simplifies the process such that the accuracy of the technique could be ascertained for a range of configurations including longer ducts and ducts that initially have nonuniform internal cross section over their length. Development of a relationship between obstacle length and wavelength of the lowest eigenfrequency required for successful reconstruction is also described. This is an important result for longer ducts where measurement of lower eigenfrequencies may present problems using standard measurement equipment.     

Liquid–liquid extraction of neodymium (III) and europium (III) using synergic mixture of furosemide and tribenzylamine in benzyl alcohol

The extraction behavior of Nd(III) and Eu(III) with 0.05 mol dm⁻³ furosemide in benzyl alcohol as single acidic extractant and then with equimolar (0.05 mol dm⁻³) synergic mixture of furosemide as acidic extractant and tribenzylamine as neutral donor in benzyl alcohol has been studied from aqueous solutions of pH 1 to 6. The effect of various parameters and of various cations and anions on the extraction of these metal ions was investigated. The composition of the extracted adducts was determined by slope analysis method that came out to be [(M(FS)₂)⁺ (CH₃COO)⁻] and [M(FS)₃·3TBA] where M = Nd(III) and Eu(III).

     

Grafting Poly(3‐hexylthiophene) from Silicon Nanocrystal Surfaces: Synthesis and Properties of a Functional Hybrid Material with Direct Interfacial Contact

Hybrid functional materials (HFMs) comprised of semiconductor nanoparticles and conjugated polymers offer the potential of synergetic photophysical properties. We have developed HFMs based upon silicon nanocrystals (SiNCs) and the conductive polymer poly(3‐hexylthiophene) (SiNC@P3HT) by applying surface‐initiated Kumada catalyst transfer polycondensation (SI‐KCTP). One unique characteristic of the developed SiNC@P3HT is the formation of a direct covalent bonding between SiNCs and P3HT. The presented method for obtaining direct interfacial attachment, which is not accessible using other methods, may allow for the development of materials with efficient electronic communication at the donor–acceptor interfaces. Systematic characterization provides evidence of a core–shell structure, enhanced interfacial electron and/or energy transfer between the P3HT and SiNC components, as well as formation of a type‐II heterostructure.     

Mixed Bis(μ-silylene) and (μ-Silylene)/(μ-Germylene) Complexes Involving the Rh/Ir Metal Combination: Nature of the Si···Si Interactions in the Bis(μ-silylene) Species

A series of mixed bis(μ-silylene) complexes of rhodium and iridium [RhIr(CO)(2)(μ-SiHR)(μ-SiR(1)R(2))(dppm)(2)] (R = R(1) = R(2) = Ph (4); R = R(1) = Ph, R(2) = Cl (5); R = R(1) = Ph, R(2) = Me (6); R = 3,5-C(6)H(3)F(2), R(1) = Ph, R(2) = Me (7); R = 3,5-C(6)H(3)F(2), R(1) = 2,4,6-C(6)H(2)Me(3), R(2) = H (8)) have been synthesized by the reaction of the silylene-bridged dihydride complexes, [RhIr(H)(2)(CO)(2)(μ-SiHR)(dppm)(2)] (1, R = Ph; 2, R = C(6)H(3)F(2)), with a number of secondary or primary silanes (Ph(2)SiH(2), PhClSiH(2), PhMeSiH(2), C(6)H(2)Me(3)SiH(3)). The influence of substituents and π-stacking interactions on the Si···Si distance (determined by X-ray crystallography) in this series and the implications regarding the nature of the Si···Si interactions are discussed. A series of novel (μ-silylene)/(μ-germylene) complexes, [RhIr(CO)(2)(μ-SiHPh)(μ-GePh(2))(dppm)(2)] (9) and [RhIr(CO)(2)(μ-SiR(1)R(2))(μ-GeHPh)(dppm)(2)] (R(1) = Ph, R(2) = H (11); R(1) = R(2) = Ph (12); R(1) = Ph, R(2) = Me (13)), have also been synthesized by reaction of the silylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-SiHPh)(dppm)(2)] (1), with 1 equiv of diphenylgermane and by reaction of the germylene-bridged dihydride complex, [RhIr(H)(2)(CO)(2)(μ-GeHPh)(dppm)(2)] (3), with 1 equiv of the respective silanes. These complexes have been characterized by multinuclear NMR spectroscopy and X-ray crystallography.