Fracture mechanism of liquid‐crystalline epoxy resin systems with different phase structures

A liquid‐crystalline epoxy resin was cured at two different temperatures. The phases of the cured systems clearly showed isotropic and nematic polydomain structures, which depended on the curing temperature. The fracture toughness of the systems was measured, and the fracture mechanism was investigated with polarized IR measurements. The nematic polydomain structure system showed considerably higher fracture toughness than the isotropic structure. Moreover, both systems exhibited a reorientation of the network chains near the fracture surface during the fracture process, and the region of the network reorientation in the nematic polydomain structure system was larger than that in the isotropic structure system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4044–4052, 2004     

Synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine and (±)-convolutamydines A and E, through enolization-Claisen rearrangement of 2-allyloxyindolin-3-ones

Claisen rearrangement triggered by enolization of 2-allyloxyindolin-3-ones with DBU was performed in order to prepare 3-allyl-3-hydroxyindolin-2-ones. Total synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine, as well as (±)-convolutamydines A and E, was achieved by transformation of the allyl moiety of 3-allyl-3-hydroxyindolin-2-ones.     

Influence of the network chain orientation on the fracture toughness of a mesogenic epoxy resin modified with CTBN

A biphenol‐type epoxy resin, which had a mesogenic group in the backbone moiety, was modified with carboxy‐terminated butadiene acrylonitrile copolymer (CTBN) as a reactive elastomer, and its fracture toughness was measured. With the addition of CTBN, the fracture toughness of the biphenol‐type epoxy resin significantly increased and became significantly higher than that of a bisphenol A‐type epoxy resin modified with CTBN. The network chain orientation in the cured biphenol‐type epoxy resin system was clearly observed during the fracture process with polarized microscopy Fourier transform infrared measurements, although such a phenomenon was not observed in the bisphenol A‐type epoxy resin system. The high toughness of the cured biphenol‐type system was clearly due to the consumption of the mechanical energy by a large deformation of the matrix resin due to the orientation of the network chains during the fracture process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1198–1209, 2003     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006     

Quantitative estimation of interaction between carbohydrates and concanavalin A by surface plasmon resonance biosensor

We measured the affinity of more than 20 sugars with concanavalin A (ConA) by an optical biosensor (surface plasmon resonance sensor) using asialofetuin (ASF) as an immobilized binding partner of ConA. We determined kinetic parameters of the effects of sugars on the dissociation of ConA from ASF quantitatively, and the structural requirements of the functional groups of sugars for binding with ConA. We found that the affinity of ConA for sugars is dependent on its conformation induced by interaction with the binding partner. In addition, the results showed that optical biosensor system is well mimics the interaction of ConA with sugars in biomembrane.     

Cation binding properties of crown ether-modified polyethylenimines

Crown ether-modified polyethylenimines (PEI-CR) were prepared to elucidate their cation binding efficiency and selectivity by liquid-liquid and solid-liquid extraction methods. With alkali metal cations it was found that polyethylenimines containing benzo-15-crown-5 moieties (Ia and Ib) extracted all cations examined more efficiently than their monomeric analogs, especially in the cases of K⁺ and Rb⁺ cations. The solid-liquid extraction revealed clearly that the polymers complexed with K⁺ and Rb⁺ cations according to a 1:2 cation-to-crown stoichiometry. The high selectivities of the polymers for K⁺ and Rb⁺ were interpreted in terms of the favourable conformation of the polymer chain for the formation of intramolecular 1:2 complexes. On the contrary, these polymers bound alkali earth cations less effectively with low selectivities.     

Photo-switchable ion and enzyme sensors. Photoinduced potentiometric response of glassy carbon electrode coated with polymer or polymer/enzyme dual membrane

Photo-switchable ion and enzyme sensors were fabricated by the use of glassy carbon electrode coated with nonactindoped or enzyme modified poly(vinyl chloride) (PVC) membranes. The ion sensor with nonactin-doped PVC membrane, which contained spirobenzopyran as the photosensitive dye, exhibited a potentiometric photoresponse to NH4+ ion in the solution. The dynamic range of the NH4+ ion sensor was 10(-7)--10(-3) M. Urea, adenosine, and asparagine sensors were prepared by coating the surface of the NH4+-ion sensor with urease, adenosine deaminase, and asparaginase membranes, respectively. These enzyme sensors could be used for determining the substrates at the micro mole level. The performance characteristics of these sensors were compared with those previously prepared membrane electrode sensors.     

Synthesis, crystal structure and thermoelectric properties of a new carbide Zr2[Al3.56Si0.44]C5

A new quaternary layered carbide, Zr₂[Al_3.56Si_0.44]C₅, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and thermopower and electrical conductivity measurements. The crystal structure was successfully determined using direct methods, and further refined by the Rietveld method. The crystal is trigonal (space group R3m, Z=3) with lattice dimensions of a=0.331059(5), c=4.09450(5) nm and V=0.38864(1) nm³. The final reliability indices calculated from the Rietveld refinement were R_wp=6.24%, R_p=4.21% and R_B=0.82%. The crystal structure is composed of electroconductive NaCl-type ZrC slabs separated by Al₄C₃-type [Al_3.56Si_0.44]C₃ layers. This material had thermoelectric properties superior to those of the ternary layered carbides Zr₂Al₃C₄ and Zr₃Al₃C₅, with the power factor reaching 7.6×10⁻⁵W m⁻¹ K⁻².     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.