Growth process of TiC clusters from Ti nanoparticles with evaporated carbon layer

Titanium carbide formation by the solid–solid reaction on the surface of Ti nanoparticles was studied in situ using a high-resolution transmission electron microscope with a heating stage. The cross-sectional image of the Ti surface was clearly observed. Vacuum-deposited carbon covered the whole the surface of Ti nanoparticles in spite of the partly evaporation on the nanoparticle surface. The diffusion of the carbon atoms inside the Ti nanoparticles depended on the size of the nanoparticles. When the Ti nanoparticle diameter was less than 30 nm, carbon atoms diffused into the Ti nanoparticle and formed TiC. The superstructure of the Ti nanoparticles was observed, which revealed the growth process of TiC to be the diffusion of carbon atoms. For Ti nanoparticles with diameter larger than 30 nm it was observed that diffusion of Ti atoms into the carbon layer was dominant, which resulted in formation of TiC in the carbon layer at the surface of Ti nanoparticles.     

Determination of trace moisture in hydrogen chloride gas by Karl Fischer titration

Moisture of several ppm in hydrogen chloride gas has been accurately determined by a new method using the Karl Fischer reagent, which hitherto had a limitation in accuracy because of a partial reaction with hydrogen chloride when direct titration was employed.The moisture in the sample gas was collected in a cold trap kept at about ?80 °C while the hydrogen chloride gas passed through and the frozen moisture was dissolved by pyridine-methanol (1:1) solvent. a KF Reagent of factoe: 0.35 mg H₂O/ml.Titration by the Karl Fischer reagent having the equivalency factor of, e.g., 0.5 mg H₂O/ml was carried out and the concentration of the moisture was calculated from the sample volume used.     

Making the liquid-phase catalytic hydrodechlorination of pce over Pd/C safer

Summary The hydrodechlorination of tetrachloroethylene in methanol (MeOH) over palladium catalysts on activated carbon (Pd/C) at 20°C and atmospheric pressure was rendered safer by using ethanol (EtOH), isopropanol (IPA) or water-alcohol mixtures as solvents. Adding water to MeOH was better than using EtOH or IPA since it resulted in a faster reaction and better stability of Pd/C, which could also be completely reactivated.     

Efficient regioselective aldol condensation of methyl ketones promoted by organoaluminum compounds,and its application to muscone synthesis

Regioselective aldol condensation of 2-octanone and 2-butanone at the methyl side proceeded in high yields using a system of dialkylaluminum phenoxide/tertiary amine. The intramolecular aldol condensation of 2,15-hexadecanedione was carried out by the same system, especially di-i-butylaluminum phenoxide/pyridine, to give dehydromuscone in 65% yield. Its hydrogenation afforded muscone (3-methylcyclopentadecanone).     

Radiation-induced degradation of aqueous 2–chlorophenol assisted by zeolites

Journal of Radioanalytical and Nuclear Chemistry - This study aims to demonstrate that zeolite has the potential to increase the efficiency of radiolysis treatment of aqueous organic pollutants by...     

Organic Dicarboxylate Negative Electrode Materials with Remarkably Small Strain for High‐Voltage Bipolar Batteries

As advanced negative electrodes for powerful and useful high‐voltage bipolar batteries, an intercalated metal–organic framework (iMOF), 2,6‐naphthalene dicarboxylate dilithium, is described which has an organic‐inorganic layered structure of π‐stacked naphthalene and tetrahedral LiO₄ units. The material shows a reversible two‐electron‐transfer Li intercalation at a flat potential of 0.8 V with a small polarization. Detailed crystal structure analysis during Li intercalation shows the layered framework to be maintained and its volume change is only 0.33 %. The material possesses two‐dimensional pathways for efficient electron and Li⁺ transport formed by Li‐doped naphthalene packing and tetrahedral LiO₃C network. A cell with a high potential operating LiNi_0.5Mn_1.5O₄ spinel positive and the proposed negative electrodes exhibited favorable cycle performance (96 % capacity retention after 100 cycles), high specific energy (300 Wh kg^?1), and high specific power (5 kW kg^?1). An 8 V bipolar cell was also constructed by connecting only two cells in series.     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

Degradation of hydroxymaleimide in 2-propanol by irradiation of energetic heavy ions (II)—N2-saturated system

Hydroxymaleimide was irradiated in N₂-saturated 2-propanol solutions by high-energy heavy ions over a wide range of LET values. The differential G-values of the degradation of hydroxymaleimide by irradiation with the heavier ions were lower than those of the lighter ions for the same LET value. An opposite result obtained in the air-saturated system. The degradation efficiency was 1.5 times higher, when the dose rate was 1/10 times lower. When irradiated at an LET value lower than 8 eV/nm, the G-values converged to a value less than that obtained by γ-irradiation.     

Electrostatic energies stored in dipolar films and analysis of decaying process of a large surface potential of Alq3 films

The decaying process of a large surface potential of as-deposited Alq₃ film was analyzed with consideration of electrostatic energies stored in the film. The analysis includes the cooperative molecular field effect and it shows that the derived equilibrium condition of dipolar films with electron traps supports the concept of the alignment of Fermi-level of metal and surface Fermi-level of dipolar films. The potential decay of Alq₃ films on Al electrodes by photo-exposure is explained due to detrapping of trapped electrons that are immediately transported to the injected electrodes along with the disordering of polar structure of Alq₃ films.