Drug-carrying latices for prolonged release of drugs

Dichlorophene was used as a model drug. Drug-carrying latex particles were prepared by soap-free emulsion copolymerization of dichlorophene acrylate with some hydrophilic methacrylate comonomers. The comonomers used affected not only the structure and colloidal stability of particles, but also the drug-activity of particles. Preliminary study of the drug activity revealed that highly hydrophilic latex particles were very stable and too inactive to be engulfed by amoebae and kill them. On the contrary, less hydrophilic particles carrying a large amount of drug can be an effective device to release drugs at a moderate rate to fight against extracelluar targets such as parasites.     

Rate of spontaneous deactivation of styryl and α-methylstyryl carbanions

The deactivation of α-methylstyryl and styryl carbanions followed by spectral change and titration was studied kinetically. First-order rate constants were obtained for the deactivation of oligo-α-methylstyryl lithium, disodium, and dipotassium in tetrahydrofuran and of polystyryl potassium in varying degrees of polymerization in benzene that contained a small amount of tetrahydrofuran and n-hexane. It was observed that the addition of cryptate [222] exerts a significant effect on the system of oligo-α-methylstyryl disodium in tetrahydrofuran. The effect of dilution, degree of polymerization of the polymer, and counterions on the rate of deactivation of carbanions was discussed.     

Effect of mono-CDNP substitution of lysine residues on the redox reaction of cytochrome c electrostatically adsorbed on a mercaptoheptanoic acid modified Au(111) surface

The effect of charge-inverting modification of single surface lysine residue on the electron transfer (ET) reaction of horse heart cytochrome c (cyt c) is examined for 12 different types of mono-4-chloro-2,5-dinitrobenzoic acid substituted cyt c (mCDNPc) adsorbed on a Au(111) electrode modified with a self-assembled monolayer (SAM) of 7-mercapto-heptanoic acid (MHA). A negative shift in the redox potential by 10-35 mV as compared to that of native cyt c and a monolayer coverage in the range of 13-17 pmol cm(-2) are observed for electroactive mCDNPc's. The magnitude of the decrease in the ET rate constant (k(et)) of mCDNPc's compared with that of native cyt c depends on the position of the CDNP substitution. For mCDNPc's in which the modified lysine residue is outside of the interaction domain of cyt c with the SAM, the ratio of the k(et) of mCDNPc to that of native cyt c is correlated to the change in the dipole moment vector of cyt c due to the CDNP modification. This correlation suggests that the dipole moment of cyt c determines its orientation of adsorption on the SAM of MHA and significantly affects the rate of the ET. The CDNP modification of lysine residues at the interaction domain significantly decreases the rate, demonstrating the importance of the local charge environment in determining the rate of ET.     

Normal and second excimers in macromolecules—II: Poly(1-methoxy-4-vinylnaphthalene) in polystyrene solid solution

Normal and second excimer formation has been examined for poly(1-methoxy-4-vinylnaphthalane) (PMVN) in polystyrene solid films as a function of measurement temperature from 420 to 77 K and film casting temperature between 369 and 303 K. It became clear that the conformation of the second excimer forming site is different from that of the normal excimer forming site. The difference in energy between the most stable conformation and the excimer forming site is 2.0 kcal/mol for the normal excimer and less than 1 kcal/mol for the second excimer. Moreover the temperature dependence of the second excimer to monomer intensity ratio is found to give information about T_γ (γ dispersion temperature) of the host polystyrene films, below which the motion of phenyl rings is restricted.     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

Dynamics and thermodynamics of dimerization of parallel G-quadruplexed DNA formed from d(TTAGn) (n=3-5)

Parallel G-quadruplexes formed from oligonucleotide sequences, d(TTAGn), where n = 3-5, have been shown to form a dimer through end-to-end stacking of 3'-terminal G-tetrads. The monomers and dimers of the G-quadruplexes are in dynamic equilibrium with an exchange rate of approximately 1 s-1. A thermodynamic study demonstrated that the dimerization of the G-quadruplexes is largely enthalpic in origin.     

Rigid-rod polymers with polysiloxane side chains. I. Synthesis and characterization of rigid-rod polyimides with polysiloxane side chains and their compatibility with linear polysiloxanes

Rigid-rod aromatic polyimdies having polydimethylsiloxane side chains were prepared for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The polyimides were obtained by imidizing the polyamide-acids bearing the side chains either thermally or chemically, which were synthesized by reacting 4,4′-diaminobiphenyl-terminated polysiloxane macromonomers with pyromellitic dianhydride in THF. The polyamide-acid films obtained by removing the solvent were soluble in THF, but the polyimides were insoluble in any common solvent. The polyimides showed no melting transition below 350°C on DSC analysis, at which temperature the side chain started decomposing. Although all the polyimides were anisotropic as observed by a polarizing microscope, x-ray diffraction analysis suggested the presence of only limited chain organization. Blends with linear polydimethylsiloxanes were prepared by casting the THF solution containing the polyamide-acid and the polydimethylsiloxane, followed by solvent evaporation and thermal imidization. With relatively longer side chains, the polyimides were proved to be compatibilized with polydimethylsiloxanes. © 1994 John Wiley & Sons, Inc.     

Intramolecular catalysis and cyclization in the reaction of α,ω-diaminooligomethylenes with bifunctional sulphonyl chloride. Effect of chain length on polycondensation reaction

As an elementary reaction of polycondensation reactions, rates of the reaction of 1,5-naphthalenedisulphonyl dichloride, a bifunctional fluorescent reagent, with excess α,ω-diaminooligomethylenes were measured by fluorometry in dilute solution. The rate constant, corresponding to that for the reaction of the first step of the polycondensation between the disulphonyl dichloride and the diamines, depended remarkably on the chain length of the diamines. By using 5-dimethylamino-1-naphthalenesulphonyl chloride, a monofunctional fluorescent reagent, and α-aminooligomethylenes, rates of model reactions between the monoamines and the monosulphonyl chloride, the diamines and the monosulphonyl chloride, as well as the monoamines and the disulphonyl dichloride were measured by fluorometry. The remarkable chain length dependence is explained by intramolecular catalysis by the primary amino group.     

Effect of polymer as cosolvent on chemical reactions in solution—I. Effects of polystyrene and polyoxyethylene on the reaction of dansyl chloride with butylamine in organic solvents

The rates of reactions of 5-dimethylamino-1-naphthalenesulphonyl chloride (dansyl chloride) with butylamine in organic solvents have been measured in the presence of polymer such as polyoxyethylene (POE) or polystyrene (PS) as cosolvent and compared with those in the presence of cosolvents of low molecular weight analogues, viz. diethyloxyethane (DEE) and toluene (Tol.). Acceleration by cosolvent POE, compared with DEE, increases with increasing volume fraction of cosolvent and the effect depends on the degree of polymerization of the polymer cosolvent. Similarly, addition of cosolvent PS to ethyl acetate or chloroform results in increase in the reaction rate as compared with cosolvent Tol. The effect by PS also showed dependence on the degree of polymerization. The effect of polymer cosolvent on chemical reactions between two low molecular weight species is explained in terms of the thermodynamics of polymer solutions.     

Nucleophilic addition reaction of 2-trimethylsilyloxyfuran to N-gulosyl-C-alkoxymethylnitrones: synthetic approach to polyoxin C

[reaction: see text] The stereoselectivity of nucleophilic addition of 2-trimethylsilyloxyfuran to N-gulosyl-C-alkoxymethylnitrones was investigated. It was found that the selectivity was highly dependent on the bulkiness of the C-substituent of the nitrone. The major adducts were elaborated into the key intermediate of polyoxin C.