Micro-phase sorbent extraction for trace analysis via in situ sorbent formation: application to the spectrophotometric determination of nitrite in environmental waters.

A micro-phase sorbent in situ formation from an aqueous solution was proposed for the sensitive spectrophotometric determination of nitrite in environmental waters. Nitrite in a 10 mL sample solution was converted into a cationic azo dye by the reaction with 4-trifluoromethylanilinium ion and N-1-naphthylethylenediammonium ion in an acidic medium. Addition of dodecylbenzenesulfonate ion caused the formation of a suspension of ion associate in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase that extracted the azo dye at the bottom of the centrifuge tube. The volume of the new phase was ca. 5 microL. After the aqueous phase was discarded, the organic phase was dissolved with 1 mL of 2-methoxyethanol to measure the absorbance. Nitrogen as NO2- at concentrations from 1.5 to 30 microg L(-1) was determined with sufficient precision. When 0.2 mL of 2-methoxyethanol was applied to dissolve the organic phase, 0.3-4.8 microg NO2--N L(-1) was determined. The recovery tests for nitrite added to some river water and seawater were satisfactory. This method is very simple and rapid. It takes only 30 min from the dye formation to the measurement of the absorbance.     

Change of concentrations of trace elements and protein contents in the liver of zinc deficient mice

The concentrations of essential trace elements and proteins in cytosolic fraction of hepatic cells of mice fed with Zn-deficient diet (Zn-def, mice) and control were determined by ICP-MS and BCA protein assay method, respectively, after division into forty fractions by gel filtration chromatography. The concentrations of zinc and proteins decreased in the 14–17th fractions of Zn-def, mice, whereas cobalt concentrations increased in the 14, 17, and 18th fractions. However, no significant differences were found on the gel after SDS-PAGE for the 12–21st fractions, although the BCA protein assay date showed the decrease of protein amounts in 13–15th fractions of Zn-def. mice.     

Solvent extraction of tetrachloronitridotechnetate(VI) ion with tetraphenylarsonium chloride

Radiochemical and spectrophotometric studies on the solvent extraction of tetrachloronitridotechnetate(VI) ion with tetraphenylarsonium chloride into chloroform have been reported. Analysis of the dependence of the distribution ratio for technetium species on the concentration of hydrogen ion (0.1–1.0M) revealed that an equilibrium between tetrachloronitridotechnetate(VI) ion and [(H₂OCl₃NTc–O–TcNCl₃(H₂O)]^2– is established in the aqueous phase. However, formation of di(-O) dimer was suggested, when the concentration of hydrochloric acid is less than 0.2M. The extraction constant for technetium and formation constant for -oxo technetium nitrido complex were evaluated.     

CO2 laser drives extreme ultraviolet nano-lithography — second life of mature laser technology

It was shown both theoretically and experimentally that nanosecond order laser pulses at 10.6 micron wavelength were superior for driving the Sn plasma extreme ultraviolet (EUV) source for nano-lithography for the reasons of higher conversion efficiency, lower production of debris and higher average power levels obtainable in CO₂ media without serious problems of beam distortions and nonlinear effects occurring in competing solid-state lasers at high intensities. The renewed interest in such pulse format, wavelength, repetition rates in excess of 50 kHz and average power levels in excess of 18 kiloWatt has sparked new opportunities for a matured multi-kiloWatt CO₂ laser technology. The power demand of EUV source could be only satisfied by a Master-Oscillator-Power-Amplifier system configuration, leading to a development of a new type of hybrid pulsed CO₂ laser employing a whole spectrum of CO₂ technology, such as fast flow systems and diffusion-cooled planar waveguide lasers, and relatively recent quantum cascade lasers. In this paper we review briefly the history of relevant pulsed CO₂ laser technology and the requirements for multi-kiloWatt CO₂ laser, intended for the laser-produced plasma EUV source, and present our recent advances, such as novel solid-state seeded master oscillator and efficient multi-pass amplifiers built on planar waveguide CO₂ lasers.     

Induced Fitting and Polarization of a Bromine Molecule in an Electrophilic Inorganic Molecular Cavity and Its Bromination Reactivity

Dodecavanadate, [V₁₂O₃₂]^4? (V12), possesses a 4.4 Å cavity entrance, and the cavity shows unique electrophilicity. Owing to the high polarizability, Br₂ was inserted into V12, inducing the inversion of one of the VO₅ square pyramids to form [V₁₂O₃₂(Br₂)]^4? (V12(Br2)). The inserted Br₂ molecule was polarized and showed a peak at 185 cm^?1 in the IR spectrum. The reaction of V12(Br2) and toluene yielded bromination of toluene at the ring, showing the electrophilicity of the inserted Br₂ molecule. Compound V12(Br2) also reacted with propane, n‐butane, and n‐pentane to give brominated alkanes. Bromination with V12(Br2) showed high selectivity for 3‐bromopentane (64 %) among the monobromopentane products and preferred threo isomer among 2‐,3‐dibromobutane and 2,3‐dibromopenane. The unique inorganic cavity traps Br₂ leading the polarization of the diatomic molecule. Owing to its new reaction field, the trapped Br₂ shows selective functionalization of alkanes.     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dynamic behaviors of ferroelectric liquid crystal molecules under an applied electric field

The dynamic changes in ferroelectric liquid crystal (FLC) molecular alignments under an applied electric field are examined by observing the formation of conoscopic figures with a time resolution of 0.1 ms. Close agreements between observed and simulated conoscopic figures under low voltage (30 V) were obtained. Under high voltage (120 V), however, the observed conoscopic figures became blurred between 0.8 ms and 1.1 ms after reversal of the electric field. The light scattering producing the blurriness occurred due to the development of fast transient molecular alignments during the switching transition above the applied voltage 70 V.