Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

Hyperfine interactions in icosahedral quasicrystals: a Mössbauer study

Icosahedral Al₆₅Cu₂₀Fe₁₅ and Al₄₀Cu_9.9Ge₂₅Mn₂₅ ⁵⁷Fe_0.1 quasicrystals are studied using⁵⁷Fe transmission Mössbauer experiments. The spectra are analyzed by distributions of electric-quadrupole interaction accounting for line asymmetries. Temperature dependences of the hyperfine parameters derived comprising average values ofP() distributions, corresponding standard deviations and center shifts are presented in a whole range from 8 to 300 K.     

Local order of icosahedral quasicrystals studied by Mössbauer spectroscopy

Thermodynamically stable Al-Cu-Fe and Fe-doped ferromagnetic Al-Cu-Ge-Mn icosahedral quasicrystals are studied by⁵⁷Fe transmission Mössbauer spectroscopy and X-ray diffraction experiments. Al₆₅Cu₂₀Fe₁₅ quasicrystalline alloy was subjected to a mechanical grinding (MG) for up to 800 hours in a ball mill. Presence of the amorphous phase which co-exists with the quasicrystalline one is revealed in the early stage of MG. Mössbauer measurements were performed on icosahedral Al₄₀Cu_10–x Ge₂₅Mn₂₅Fe _x quasicrystal (x0.1; 3) in a temperature range from 10 K to 548 K. It was found that a magnetic transition occurs at about 30 K which is far belowT _c reported in the literature. It is concluded that AlGeMn ferromagnet which is present in the samples does not affect the magnetic transition observed and the transition is an intrinsic property of the Al-Cu-Ge-Mn host alloy.Samples of icosahedral quasicrystals were kindly provided by Profs. A. Inoue, T. Masumoto and P. H. Shingu. Ball milling was performed in Kyoto University by a courtesy of Prof. P. H. Shingu. This work was supported by the project for priority areas on properties of quasicrystals (No. 01630003) from the Japanese Ministry of Education, Science and Culture.     

Studies on the synthesis of compounds related to adenosine 3',5'-cyclic phosphate. IX. Synthesis and cytotoxic effect of adenosine 3',5'-cyclic alkylphosphoramidates.

A series of adenosine 3',5'-cyclic monophosphoramidates (3, cAMP amidates), including long-chain alkyl amidates, were synthesized from adenosine 3',5'-cyclic monophosphate (1, cAMP) by means of a one-pot reaction. This reaction proceeded by the treatment of cAMP tributylammonium salt (2) with phosphorus pentachloride (PCl5) and alkylamine in N,N-dimethylformamide (DMF). Compounds 3 synthesized were investigated to determine their cytotoxic activities on the growth of mouse mastocytoma P-815 cells, mouse mammary tumor FM3A cells, and human mammary tumor ZR-75 cells in culture. It was found that compounds 3h-m showed significant cytotoxic activities against these cell lines, and that cAMP decylamidate (3j) was the most cytotoxic compound (the concentration required for 50% inhibition of cell growth, ID50 = 6.0, 15.0, 2.2 microM, respectively); the antitumor effect on P-815 cells by a total packed cell volume method showed 81.8% inhibition. The cytotoxic activity of 3 increased with the increase in alkyl chain length up to 10 carbon atoms and decreased in compounds having longer alkyl chain.     

Ring transformation of 6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine. IV (1). Reduction and reaction of 5a-acetyl-6a-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitriles with primary amines

The reaction of 5a-acetyl-6-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitrile ( 1a ) with benzylamine gave ethyl l-benzyl-5-cyano-8a,9-dihydro-2-methyl-1H-pyrrolo[3,4-e]-pyrazolo[1,5-a]pyrimidine-8a-carboxylate ( 2a ), in addition to 5-acetyl-3-benzylamino-1-(4-cyanopyrazol-3-yl)- 2-pyridone ( 3 ). Reaction of 1a with aniline gave ethyl 6-acetyl-8-anilino-3-cyano-7,8-dihydro-4H-pyrazolo-[1,5-a][1,3]diazepine-8-carboxylate ( 4 ), in addition to ethyl 3-cyano-7-methyl-6-pyrazolo[1,5-a]pyrimidine-acrylate ( 5 ). On the other hand, the same reactions of 1b with benzylamine or aniline gave 2b or 8b , respectively. Though catalytic hydrogenation of 1a over 5% palladium-carbon proceeded by ring fission of cyclopropane ring to give 9 , 1a (or 1b ) afforded 4,5-dihydro derivatives ( 13 or 15 ) by catalytic hydrogenation over platinum oxide. The reactivity of 5-methoxy-4,5,5a,6a-tetrahydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine ( 16 ), which are related analogs of 1a,b , is also described.     

Preparation of porous clay minerals with organic-inorganic hybrid pillars using solvent-extraction route

A microporous clay mineral with organic-inorganic hybrid pillars was synthesized using a hydrochloric acid (HCl)/ethanol extraction method after intercalation of tetraethoxysilane (TEOS) or TEOS/methyltriethoxysilane (MTS) into the cetyltrimetylammonium ion (CTA)-exchanged vermiculite. The products retained their layered structure, due to the formation of stable pillars by the polymerization of hydrolyzed TEOS and MTS during the HCl/ethanol treatment. The BET surface areas, which increased to above 500 m2g(-1) with an increase in the HCl concentration up to 0.4 moldm(-3), are nearly equal to that of the calcined product obtained by the conventional method. However, the pore sizes of HCl/ethanol-treated materials were narrower than those of the calcined product, owing to the formation of the polysiloxane networks in the gallery. A water adsorption study showed that the product treated with a TEOS/MTS mixture had a hydrophobic surface as a result of the successful incorporation of methyl groups at the surface of the pillars. This novel method is advantageous for the synthesis of organophilic pillared clays with different kinds of organic materials in the interlayers.     

57Fe Mössbauer study of FeNx (x=0.25≈0.91) alloys

⁵⁷Fe Mössbauer measurements have been perforned at the first time on iron nitrides, FeN_x(x>0.5), films prepared by rf sputtering and the measurements for γ-FeN_0.09, γ'-Fe₄N, ε-Fe_2–3N and ζ-Fe₂N have been also performed. Two new phases for x>0.5 have been identified: One has a ZnS-type structure denoted by γ" Another phase is denoted by γ''' in which iron atoms constitute a fcc lattice but the details of occupation sites of nitrogen atoms are not yet clear. The isomer shift of γ" relative to α-Fe at 300 K is rather small in comparison with that of other well known nitrides. The roam temperature Mössbauer spectra of γ''' consist of a sum of two doublets. Mössbauer spectra of γ" at 10 K do not indicate magnetically split pattern, but those of γ''' show magnetically split patterns at 10 K with the hyperfine fields of 30 T and 48 T, respectively. The component of 48 T is due to oxides, not due to nitrides.     

Mössbauer Spectra of FePS3-Cobaltocene Intercalation Compound

Abstract

Mössbauer spectra of the FePS₃-cobaltocene intercalation compound were measured in the temperature range of 300K to 10K. The spectra, distinct from those of pure FePS₃, suggest the charge transfer from cobaltocene to Fe-S antibonding orbitals of the FePS₃ host lattice.