Two-level structured self-adaptive surfaces with reversibly tunable properties

We report a route to fabricate two-level structured self-adaptive surfaces (SAS) of polymer materials. The first level of structure is built by a rough polymer film that consists of needlelike structures of micrometer size. The second level of structure is formed by the nanoscopic self-assembled domains of a demixed polymer brush irreversibly grafted onto the needles. By exposing the surface to solvents that are selective to one of the components of the brush, we reversibly tune the surface properties. The large-scale surface structure amplifies the response and enables us to control wettability, adhesion, and chemical composition of the surface over a wide range.     

Nanosensors based on responsive polymer brushes and gold nanoparticle enhanced transmission surface plasmon resonance spectroscopy

Swelling (and shrinking) of poly(2-vinylpyridine), P2VP, polymer brushes, caused by pH changes, could be readily monitored by transmission surface plasmon resonance, T-SPR, spectroscopy. Gold nanoparticles attached to the P2VP polymer brushes dramatically enhanced the pH-induced shift in the T-SPR absorption spectra. (A 50 nm shift of the absorption maximum of the T-SPR spectrum of the supporting gold nanoislands was observed upon changing the pH from 5.0 to 2.0, corresponding to a swelling of the polymer brushes from 8.1 +/- 0.7 to 24.0 +/- 2.0 nm. Same shift in the opposite direction was observed upon changing the pH from 2.0 to 5.0.)     

First-second shell interactions in metal binding sites in proteins: a PDB survey and DFT/CDM calculations

The role of the second shell in the process of metal binding and selectivity in metalloproteins has been elucidated by combining Protein Data Bank (PDB) surveys of Mg, Mn, Ca, and Zn binding sites with density functional theory/continuum dielectric methods (DFT/CDM). Peptide backbone groups were found to be the most common second-shell ligand in Mg, Mn, Ca, and Zn binding sites, followed (in decreasing order) by Asp/Glu, Lys/Arg, Asn/Gln, and Ser/Thr side chains. Aromatic oxygen- or nitrogen-containing side chains (Tyr, His, and Trp) and sulfur-containing side chains (Cys and Met) are seldom found in the second coordination layer. The backbone and Asn/Gln side chain are ubiquitous in the metal second coordination layer as their carbonyl oxygen and amide hydrogen can act as a hydrogen-bond acceptor and donor, respectively, and can therefore partner practically every first-shell ligand. The second most common outer-shell ligand, Asp/Glu, predominantly hydrogen bonds to a metal-bound water or Zn-bound histidine and polarizes the H-O or H-N bond. In certain cases, a second-shell Asp/Glu could affect the protonation state of the metal ligand. It could also energetically stabilize a positively charged metal complex more than a neutral ligand such as the backbone and Asn/Gln side chain. As for the first shell, the second shell is predicted to contribute to the metal selectivity of the binding site by discriminating between metal cations of different ionic radii and coordination geometries. The first-shell-second-shell interaction energies decay rapidly with increasing solvent exposure of the metal binding site. They are less favorable but are of the same order of magnitude as compared to the respective metal-first-shell interaction energies. Altogether, the results indicate that the structure and properties of the second shell are dictated by those of the first layer. The outer shell is apparently designed to stabilize/protect the inner-shell and complement/enhance its properties.     

Photochemical structuring and fixing of structures in binary polymer brush layers via 2pi+2pi photodimerization

Binary polymer brushes grafted to Si wafers were prepared from hydrophilic and hydrophobic polymer components, which allow switching the surface properties (as revealed by contact angles) by exposure to varying solvents. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was a copolymer of styrene and 2-(4-vinylphenyl)indene containing the photodimerizable phenylindene chromophore. The brushes were prepared via thermal and via photochemical grafting-to methods, which led to distinct layer thicknesses. Structural patterns differing in surface properties were produced and fixed via crosslinking the hydrophobic component by 2pi+2pi photodimerization of phenylindene moieties. The patterns were visually observable.     

Virus Particles Monitored by Fluorescence Spectroscopy: A Potential Detection Assay for Macromolecular Assembly¶

Native fluorescence spectroscopy was used for in situ investigations of two lipid‐containing bacteriophages from the cystovirus family as well as their Pseudomonad host cells. Both the viruses φ6 and φ12 and their bacterial host proteins contain the amino acid tryptophan (trp), which is the predominant fluorophore in UV. Within proteins, trp's structural environment differs, and the differences are reflected in their spectroscopic signatures. It was observed that the peak of the trp emission from both viruses was at 330 nm, a significantly shorter wavelength than trp in either the Pseudomonad host cells or the amino acid's chemical form. This allowed us to monitor the viral attachment process and subsequent lytic release of progeny virus particles by measurement of the trp emission spectra during the infection process. This work demonstrates that fluorescence may offer a novel tool to detect viruses and monitor viral infection of cells and may be part of a biodefense application.     

Structure and reactivity of peroxide monomers

The reactivity of both the peroxide (2-tert-butylperoxy-2-methyl-5-hexene-3-yne) and hydroperoxide (2-hydroperoxy-2-methyl-5-hexene-3-yne) monomers in the radical copolymerization was compared. Using the Alfrey-Price Q and e scheme, Hammett correlations, and MNDO quantum-chemical model it was shown that both peroxy- and hydroperoxyisopropylic substituents pronounce a similar positive effect of hyperconjugation. Despite that these monomers showed different reactivity due to the ability of the hydroperoxide monomer to form complexes with protonoacceptors. IR spectroscopy was employed for the evaluation of energies of hydrogen bonds and equilibrium constants. © 1996 John Wiley & Sons, Inc.     

Surface memory effect in nematics with smectic C short-range order and hydrogen bonded molecules

A surface memory effect (SME) is found in the dimerized nematic with short range smectic C order of 4-n-octyloxybenzoic acid (OOBA) in a cell whose walls have been covered with an obliquely evaporated SiO or ITO layer. The recording and erasure processes are discussed and erasure in the nematic phase is realized. A mechanism for the surface memorization is presented which takes into account the specific character of dimerized nematics preceding cooling into a smectic C phase.     

Synthesis and Properties of Hyperbranched Polyimides Combined with Silica

Summary: The novel hyperbranched polyimide - silica hybrid materials containing theoretically 16 wt% of an inorganic phase were prepared via a sol-gel process. An amine terminated polyimide precursor (hyperbranched polyamic acid) was prepared from commercially available monomers 4,4′,4″-triaminotriphenylmethane and 4,4′-oxydiphthalic anhydride in molar ratio 1:1. Tetramethoxysilane and/or 3-glycidoxypropyltrimethoxysilane (also used as a coupling agent) were used as silica precursors. During thermal exposition the polyimide precursor was transformed to hyperbranched polyimide and hydrolyzed alkoxy groups reacted mutually to form silica. The final products were self-standing films, whose structure was characterized by using IR and ¹³C and ²⁹Si solid state NMR spectroscopy. The influence of the amount of silica and/or coupling agent on their structure and thermal properties was described.     

Single nanoparticle plasmonic devices by the "grafting to" method

Hierarchically organized single-nanoparticle structures synthesized in this work consisted of a 200 nm silica core and a pH-responsive poly(2-vinylpyridine) shell decorated with 15 nm gold nanoparticles. pH changes in the range of 3-6 back and forth results in a swelling-shrinking polymer brush shell and, thus, in the tuning distance between noble nanoparticles. A change in the interparticle distance is accompanied by a very pronounced shift in the maximum wavelength of the surface plasmon absorption peak. The dispersion of the resulting composite nanoparticles reversibly changed color from red to purple-blue as the pH changed from 2.5 to 6. Such hierarchically assembled nanostructures can be used as free-standing single-particle sensors in various miniaturized analytical systems.