Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

Sandwich-like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich-structured host filled with continuous 2D catalysis–conduction interfaces. This MoN-C-MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high-efficiency conversion on the two-sided nitride polar surfaces, which are supplied with high-flux electron transfer from the buried carbon interlayer. The 3D self-assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN-C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job-synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high-rate and long-term cycling.     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。     

MgCl_2晶型对丙烯聚合MgCl_2载体催化剂活性的影响

ＭｇＣｌ_２晶型对丙烯聚合ＭｇＣｌ_２载体催化剂活性的影响张明辉，肖世镜中国科学院化学研究所，北京，１００８０）关键词丙烯聚合、ＭｇＣｌ２、载体催化剂近年来，有关ＭｇＣＩ。载体催化剂的研究报道和综述文章不少，但涉及载体晶型对催化剂结构性能的影响却少见．...     

新颍Mo-Cu-Se簇合物{MoCu3Se3I}(PPh3)3O·0.5CH2Cl2的合成及晶体结构

新颍Mo-Cu-Se簇合物{MoCu₃Se₃I}(PPh₃)₃O·0.5CH₂Cl₂是由［Et₄N］₂MoSe₄、Cu(PPh₃)₂NO₃和KI在乙腈和二氯甲烷1∶1的混合溶剂中反应所得。晶体属单斜晶系，空间群P2_{1相似文献}   

基于壳聚糖膜固定双酶的胆碱传感器的研究

提出了一种基于壳聚糖膜固定辣根过氧化物酶 胆碱氧化酶的胆碱传感器的制备方法。该传感器以电聚合于玻碳电极的硫堇作为电子传递介体,在pH6. 8,外加电压-0. 2V(vs.SCE)条件下,其峰电流与浓度范围 5. 0×10-5 ~3. 0×10-3 mol/L的胆碱呈良好的线性响应;检出限为 1. 0×10-5 mol/L。传感器有良好的选择性和稳定性,使用一月后,仍能保持其初始活性的 80%。     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

Structural and photocatalytic properties of the new solid photocatalyst In2BiTaO7

In₂BiTaO₇ was synthesized using the solid-state reaction method and its photocatalytic properties were investigated. The results of powder X-ray diffraction (XRD) indicated that the compound crystallizes in the pyrochlore-type structure, cubic system with space group Fd-3m. The lattice parameter is 10.6972(1) ?. In addition, the compound shows strong optical absorption in the visible region (λ > 420 nm) and the band gap of In₂BiTaO₇ was estimated to be about 2.47 eV. For the photocatalytic reaction, H₂ or O₂ evolution was observed from CH₃OH/H₂O or AgNO₃ solution respectively with In₂BiTaO₇ as the photocatalyst under visible light irradiation, indicating that In₂BiTaO₇ is responsive to visible light for splitting water. Furthermore, the catalyst remained photoactive in the wavelength range up to 510 nm. Photocatalytic degradation of methylene blue (MB) dye over the compound was further investigated under visible light irradiation. The results showed that complete removal of aqueous MB could be achieved after irradiation for 135 min over In₂BiTaO₇. Furthermore, under visible light irradiation In₂BiTaO₇ showed markedly higher catalytic activity compared to P-25 for MB photocatalytic degradation.