Heavy element nuclear chemistry at JAERI

The present status of heavy element nuclear chemistry research at JAERI (Japan Atomic Energy Research Institute) is reviewed. Production of the transactinide nuclei ²⁶¹Rf and ²⁶²Db via the reactions of ²⁴⁸Cm(¹⁸O,5n) and ²⁴⁸Cm(¹⁹F, 5n), respectively, at the JAERI tandem accelerator is reported. Study of the aqueous chemistry of Rf is being carried out with a newly developed rapid ion-exchange separation apparatus. Anion-exchange behavior of Rf in acidic solution is briefly discussed. Recent experimental results on decay studies of neutron-deficient actinide nuclei using the gas-jet coupled JAERI-ISOL are given. We also discuss characteristics of nuclear deformation properties at scission in symmetric and asymmetric fission of actinides. Prospects for studies in the near future are briefly considered.     

Shockley surface states on three faces of bcc iron

Strictly localized or resonance Shockley surface states have been found on the (111), (010) and (110) faces of paramagnetic bcc iron for ,¯M and ¯N points in the corresponding surface Brillouin zones. Energy, character of wave function and its damping for these states are reported. Emphasis is laid on implications of surface states in photoemission, field-electron and -ion emission, electron energy-loss or disappearance potential spectroscopy, Auger electron spectroscopy, work function, magnetic properties, electric conductivity, as well as chemisorption and catalysis.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Organophosphines in PtP2Si2 derivatives – structural aspects

Abstract

In this review, the structural data of monomeric platinum(II) complexes with inner coordination spheres of Pt(η²-P₂L)(SiL)₂, Pt(η²-P₂L)(η²-Si₂L) and Pt(η²-P,SiL)₂ are classified and analyzed. These complexes crystallize in three crystal systems: monoclinic (8 examples), triclinic (4 examples) and orthorhombic (4 examples). Distorted square-planar environments about the Pt(II) atoms are built up by combination of homobi-P,P with two monodentate Si donor ligands; homobi-PP with homo-Si,Si donor ligands, or heterobi-P,Si donor ligands. The chelating ligands create metallacycles with the following angles: 65.0° (SiOSi) < 83.1° (SiC₂Si) < 85.2° (PC₂P) < 88.8° (SiSi₂Si)). The mean Pt-P and Pt-Si bond distances in Pt(η²-P₂L)·(SiL)₂ complexes are 2.319 and 2.365?Å; in Pt(η²-P₂L)(η²-Si₂L) the values are 2.316 and 2.360?Å. The complex [Pt{η²-Me₂P(C₂B₁₀H₁₀)SiMe₂}₂] exists in two isomeric forms, a monoclinic cis- and a triclinic trans-isomer. The structural data are compared and discussed with the complexes of inner coordination spheres: Pt(η²-P₂L)(XL)₂ (X?=?O, N, CN, BL, Cl, SL, SeL, Br, or I) and Pt(η²-P₂L)(η²-X₂L) (X?=?OL, NL, SL or SeL).     

Determination of trace metals by ICP-OES in plant materials after preconcentration of 1,10-phenanthroline complexes on activated carbon

In this work, 1,10-phenanthroline was used as a complexing agent for the separation and preconcentration of Cd(II), Co(II), Ni(II), Cu(II) and Pb(II) on activated carbon. The metals were adsorbed on activated carbon by two methods: static (1) and dynamic (2). The optimal condition for separation and quantitative preconcentration of metal ions with activated carbon for the proposed methods was for (1) in the static methods in the pH range 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (92.6%), Co(II) (95.6%), Pb(II) (91.0%), and with 3 mol dm⁻³ HNO₃ for Cd(II) (95.4%), Pb(II) (100.2%). The preconcentration factor was 100 with R.S.D. values between 1.0 and 2.9%. For (2), the dynamic method (SPE), the pH range for the quantitative sorption was 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (100.6%), Pb(II) (94.4%), and reasonably high recovery for Co(II) (83%), Cu(II) (88%). The optimum flow rate of metal ions solution for quantitative sorption of metals with 1,10-phenanthroline was 1-2 cm³ min⁻¹ whereas for desorption it was 1 cm³ min⁻¹. The preconcentration factor was 50 for all the ions of the metals with R.S.D. values between 2.9 and 9.8%.The samples of the activated carbon with the adsorbed trace metals can be determined by ICP-OES after mineralization by means of a high-pressure microwave mineralizer. The proposed method provides recovery for Cd (100.8%), Co (97.2%), Cu (94.6%), Ni (99.6%) and Pb (100.0%) with R.S.D. values between 1.2 and 3.2%.The preconcentration procedure showed a linear calibration curve within the concentration range 0.1-1.5 μg cm⁻³. The limits of detection values (defined as “blank + 3s” where s is standard deviation of the blank determination) are 5.8, 70.8, 6.7, 24.6, and 10.8 μg dm⁻³ for Cd(II), Pb(II), Co(II), Ni(II) and Cu(II), respectively, and corresponding limit of quantification (blank + 10s) values were 13.5, 151.3, 20.0, 58.9 and 33.2 μg dm⁻³, respectively.As a result, these simple methods were applied for the determination of the above-mentioned metals in reference materials and in samples of plant material.     

Organodiphosphines in cis-Pt(η2-P2L)(η2-S2L) derivatives – structural aspects

Abstract

In this review structural parameters of forty complexes with an inner coordination sphere of Pt(η²-P₂L)(η²-S₂L) are analyzed and classified These complexes crystallize in three crystal systems: orthorhombic (four examples), triclinic (six examples) and monoclinic (thirty examples). The organodiphosphines create four- (PCP), five- (PC₂P), six- (PC₃P) and seven- (PC₄P) membered metallocyclic rings with mean P-Pt-P bite angle values of 72.5° (PCP) < 85.3° (PC₂P) < 93.0° (PC₃P) < 97.4° (PC₄P). The dithiolates create four- (SCS), five- (SC₂S), six- (SC₃S; SCSCS; SPNPS; SPCPS) and seven- (SC₄S) membered metallocyclic rings with mean S-Pt-S bite angle values of 74.5° (SCS) < 85.8° (SCSCS) < 87.0° (SPNPS) < 89.0° (SC₂S) < 92.3° (SC₄S) < 93.5° (SC₃S) < 97.5° (SPCPS). The mean Pt-P and Pt-S bond distances are 2.257 and 2.328?Å, respectively. The data are compared with those found in complexes with inner coordination spheres of Pt(PL)₂(SL)₂, Pt(PL)₂(η²-S₂L) and Pt(η²-P₂L)(SL)₂.     

Radionuclide X-ray fluorescence analysis of selected elements in drug samples with 8-hydroxyquinoline preconcentration

The preconcentration performance characteristics of precipitation of Mn, Fe, Co, Cu, Zn, Pb, Ni and Hg with 8-hydroxyquinoline (8HQ) and subsequent filtration through cellulose nitrate membrane were investigated for the X-ray fluorescence spectrometry identification and determination of trace metal ions in drug samples. Several parameters of the method were optimised, including pH and amount of 8HQ. The investigated ions were collected on cellulose nitrate membrane filter (Pragopor 4) as their complexes after the reaction with 8HQ. To conclude, optimal reaction conditions were found out (pH 10.5 for Fe, Co and pH 11.5 for Mn, Cu Zn, Pb and Hg, volume of 20 μl of the 2 % solution of hydroxyquinoline). Thereafter, the content of these elements was determined in the active substances of the infusion and injection solutions, i.e. NaCl, glucose and dextrane, and the results were compared with those ones obtained after the preconcentration with thioacetamid. The rapidity of this method, its multi-element character and low detection limits proved this method to be a very promising in rapid screening in quality control of drugs.