New strong interactions: From QCD to LHC

The concept of strong interactions need not be limited to the sector of physics taken by QCD. While this domain is investigated by RHIC, LHC will be able to probe potential new strong interactions simultaneously: Finding the precise mechanism for electroweak symmetry breaking is one of the prime problems of physics. Intricately linked to this point is the question after the true nature or even the existence of the Higgs boson. Here, we present stronly interacting theories providing an explanation for the hierarchy problem and leading to a light composite Higgs boson, favoured by experimental data. Our variation of the standard model is consistent with precision data. We achieve this accordance by using technifermions in a higher representation of their gauge group. Anomaly conditions require at least one extra lepton family for some of the theories whereby they contain a natural dark matter candidate. We can accurately determine the masses of said leptons from experimental data.     

Investigation of multiwavelength clock recovery based on heterodyne beats of sideband-filtered signal

We investigate a new parallel all-optical clock recovery scheme based on heterodyne beats of an optical sideband-filtered signal. The oscillating clock signal is recovered when the filtered sideband is combined with a stable local oscillator. The filtering is performed with an optical resonator, which by nature provides possibility for multiwavelength operation. The local oscillator could be realized by a multiwavelength laser, whose emission wavelengths are injection seeded with carrier wavelengths of the input data. The output signal of such a configuration benefits from a reduced bit-pattern effect and a stable offset level. The sideband filtering is demonstrated for 23 simultaneous channels at 100 GHz DWDM grid, each hosting a data stream of 10 Gbit/s.     

Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Synthesis and Characterization of Optical Sol–Gel Adhesive for Military Protective Polycarbonate Resin

Sol–gel adhesive material for isostatic hotpressing lamination process was synthesized using 3-aminopropyltrimethoxysilane (APTES), 3-glycidyloxypropyltrimethoxysilane (GPTS) and methacryloxypropyltrimethoxysilane (MPTS) as precursors. Reaction dynamics between APTES and GPTS was followed on-line with Raman spectroscopy. The lamination process was optimized by varying hotpressing times and pressures at the constant temperature. Mechanical shear strength properties were found to be excellent for studied composition, 25–30 kg/cm² at its best. One possible application of laminated polycarbonate (PC) structure is a soldier helmet visor. Therefore, the ballistic protection properties were tested by shooting with 1.1 gram standard fragment, and determining the v₅₀ velocity value, which corresponds to 50% perforation. The laminated structure gave 5.7% better protection compared with the solid polycarbonate. The laminated components were found to have high optical transparency at the visible wavelengths as well as high environmental stability.     

Monitoring of yeast fermentation by ion mobility spectrometry measurement and data visualisation with Self-Organizing Maps

Ion mobility spectrometry (IMS) measurement combined with unsupervised neurocomputing is considered as a new potential method for on-line monitoring of fermentation and other processes producing volatile compounds that involve micro-organisms. This was demonstrated in a model system in which a strain of brewer’s yeast (Saccharomyces cerevisiae) was cultivated in a bench-top fermenter. Five phases of yeast growth could be detected from measurements of the exhaust gases from the fermenter, as indicated by the changes in ion mobility spectra analysed by computational methods.The data were first processed using the Self-Organizing Map (SOM) algorithm, the results showing that the phases of fermentation can be detected and identified. The cultivations were also shown by Sammon’s mapping to be comparable to a certain level of accuracy. Contaminated cultivation could be detected by its distinctive ion mobility spectrometry profile.     

Geometry prediction of hafnocenes by quantum chemical methods

The performance of quantum chemical methods for geometry prediction of hafnocenes was evaluated. HF, B3LYP and MP2 in combination with nonrelativistic (MHF) and relativistic (MWB and LANL2DZ) basis sets for hafnium together with standard basis sets 3-21G*, 6-31G* and 6-311G** for other elements were applied. Five basic structural parameters of the optimized structures of the hafnocenes were compared with experimental crystal structures obtained from the Cambridge structural database. Altogether 80 hafnocenes were included in the analysis. The results show that relativistic corrections are necessary for Hf atom. However, even the Hartree–Fock (HF) method, when combined with relativistic pseudopotentials, reproduces the experimental crystal structures with significant accuracy. The good performance of the HF method can be understood to originate from the absence of significant near-degeneracy correlations for hafnium. On average, the B3LYP and MP2 methods provide structural parameters somewhat closer to the experimental ones.     

In situ reaction mechanism studies on the atomic layer deposition of Al2O3 from (CH3)2AlCl and water

Reaction mechanisms between dimethylaluminum chloride and deuterated water in the atomic layer deposition (ALD) of Al2O3 were studied at 150-400 degrees C using a quartz crystal microbalance (QCM) and a quadrupole mass spectrometer (QMS). The observed reaction byproducts were DCl and CH3D. QMS showed that about one-third of the chlorine, and half of the methyl ligands were released during the (CH3)2AlCl pulse. The growth rate deduced from the QMS and QCM data was in qualitative agreement with the previously published growth rate from ALD film growth experiments.     

Cytochrome c–dimyristoylphosphatidylglycerol interactions studied by asymmetrical flow field-flow fractionation

Lipid membranes are well recognized ligands that bind peripheral and integral proteins in a specific manner and regulate their function. Cytochrome c (cyt c) is one of the partner peripheral protein that binds to the lipid membranes via electrostatic and hydrophobic interactions. In this study, asymmetrical flow field-flow fractionation (AsFlFFF) was used to compare the interactions of cyt c with the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol (DMPG), oleic acid (OA), and sodium dodecyl sulfate (SDS). The influence of pH and the cyt c–lipid molar mass ratios were evaluated by monitoring the diffusion coefficients and particle diameter distributions obtained for the free and lipid-bound protein. The hydrodynamic particle diameter of cyt c (pI 10) was 4.1 nm at pH 11.4 and around 4.2 nm at pH 7.0 and 8.0. Standard molar mass marker proteins were used for calibration to obtain the molar masses of free cyt c and its complexes with lipids. AsFlFFF revealed the binding of cyt c to DMPG and to OA to be mainly electrostatic. In the absence of electrostatic interactions, minor complex formation occurred, possibly due to the extended lipid anchorage involving the hydrophobic cavity of cyt c and the hydrocarbon chains of DMPG or SDS. The possibility of the formation of the molten globule state of cyt c, induced by the interaction between cyt c and lipids, is discussed.Electronic Supplementary Material Supplementary material is available for this article at     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.