Fast solid-phase extraction-gas chromatography-mass spectrometry procedure for oil fingerprinting. Application to the Prestige oil spill

A rapid and simple fractionation procedure using solid-phase extraction (SPE) cartridges was developed for an accurate determination of aliphatic and polycyclic aromatic hydrocarbons in petroleum residues and further application in chemical fingerprinting of oil spills by gas chromatography-mass spectrometry (GC-MS). Among the adsorbents evaluated, SiO2/C3-CN exhibited the best selectivity, providing, by elution with n-hexane (4 ml) and n-hexane-CH2Cl2 (1:1) (5 ml), two well-resolved aliphatic and aromatic hydrocarbon fractions, with recoveries of 97 +/- 7.2 and 99.7 +/- 13.9%, respectively. The SPE fractionation procedure was compared with the conventional silica-alumina adsorption chromatography showing similar results but practical advantages in terms of reproducibility, analysis time, solvent reduction and cost. Moreover, is particularly suitable for routine analysis with a high sample throughput. The developed methodology was tested in the characterization of fuel-oil samples collected along the Spanish north-west coast, after the Prestige oil spill accident.     

Development of a syn‐Selective Mannich Reaction of Aldehydes with Propargylic Imines by Dual Catalysis: Asymmetric Synthesis of Functionalized Propargylic Amines

Direct coupling of enolizable aldehydes with C‐alkynyl imines is realized affording the corresponding propargylic Mannich adducts of syn configuration, thus complementing previous methods that gave access to the anti‐isomers. The combination of proline and a urea Brønsted base cocatalyst is key for the reactions to proceed under very mild conditions (3–10 mol % catalyst loading, dichloromethane as solvent, ?20 °C, 1.2 molar equivalents of aldehyde) and with virtually total stereocontrol (syn/anti ratio up to 99:1; ee up to 99 %). Some possibilities of further chemical elaboration of adducts are also briefly illustrated.     

Supercritical fluid extraction of atrazine and its metabolites from soil

Soxhlet (methanol) and SFE extraction with carbon dioxide in the presence of modifiers at different temperatures (100–200°C) for the extraction of atrazine and its main metabolites from a soil sample were compared. The most effective extraction conditions for both atrazine and its metabolites (i.e. deethylatrazine and deisopropylatrazine) were Co₂ modified with 20% molar methanol-trifluoroacetic acid (MeOH-TFA) (TFA 0.65M in MeOH) at 100°C, leading to an extraction efficiency comparable with that of Soxhlet extraction with MeOH for atrazine and ca. 20% higher for its main metabolites. The relative standard deviation (RSD) of SFE was lower than that obtained by Soxhlet extraction, probably because of less interference in the cGC-NPD determination. All the other modifiers evaluated (acetone, triethylamine, and methanol) were less effective than MeOH-TFA for the extraction of atrazine and its metabolites from a soil sample, even at high molar concentrations (20%) and use of higher extraction temperatures (200°C). These results indicate the importance of matrix effects and the need of the selection of an appropriate modifier in order to obtain quantitative extractions by SFE.     

Quantitative strain analysis of flip-chip electronic packages using phase-shifting moiré interferometry

In order to gauge the reliability of electronic packages, it is valuable to analyze thermally induced displacements and strains around bimaterial corners and within interconnections. The increased demand for computing performance has created increasingly complex electronic packages with miniaturized features, making it increasingly difficult to extract these quantities. Often, material properties at these length scales are not fully known, making modeling and simulation problematic. Thus, determining displacements and strains experimentally is attractive. In this study, an advanced flip-chip package with fine interconnection features was analyzed using phase-shifting moiré interferometry (PSMI) in conjunction with image analysis software developed for this purpose. Before the analysis, PSMI was qualified using an isotropic solid undergoing uniform thermal contraction, which yielded a displacement precision of ±4 nm. Then a high-magnification, high-resolution displacement and strain analysis was performed for a small cross-sectional region of the flip-chip package containing 20–100 μm sized features. The analysis quantifies these results and gives displacements and strains obtained by differentiating the displacement data using a strain-energy-based finite element formulation.     

Catalytic Enantioselective Synthesis of N,Cα,Cα‐Trisubstituted α‐Amino Acid Derivatives Using 1H‐Imidazol‐4(5H)‐ones as Key Templates

1H‐Imidazol‐4(5H)‐ones are introduced as novel nucleophilic α‐amino acid equivalents in asymmetric synthesis. These compounds not only allow highly efficient construction of tetrasubstituted stereogenic centers, but unlike hitherto known templates, provide direct access to N‐substituted (alkyl, allyl, aryl) α‐amino acid derivatives.