Studies on cerebral protective agents. I. Novel 4-arylpyrimidine derivatives with anti-anoxic and anti-lipid peroxidation activities.

Novel 4-arylpyrimidine derivatives were synthesized by the oxidation of 4-aryl-1,4-dihydropyrimidines, and their effects on anti-anoxic (AA) activity in mice and anti-lipid peroxidation (ALP) activity in rat brain mitochondria were investigated. Among these compounds, ethyl 6-methyl-2-phenyl-4-(4-pyridyl)-5-pyrimidinecarboxylate (4b) has AA activity (10 mg/kg, i.p.) and ethyl 6-methyl-4-(3-nitrophenyl)-2-phenyl-5-pyrimidinecarboxylate (4f) has ALP activity (73% inhibition at 10(-5) g/ml). The latter compound (100 mg/kg, i.p.) was also effective on arachidonate-induced cerebral edema in rats with comparable potency to that of vitamin E.     

Ruthenium-catalyzed reaction of alpha,beta-unsaturated imines with carbon monoxide and alkenes leading to beta,gamma-unsaturated gamma-butyrolactams: involvement of direct carbonylation at olefinic C[bond]H Bonds as a key step

The reaction of alpha,beta-unsaturated imines with CO and alkenes in the presence of Ru(3)(CO)(12) as a catalyst results in a three-component coupling reaction that gives alpha,alpha-disubstituted beta,gamma-unsaturated gamma-butyrolactams. The reaction proceeds via a two-step sequence involving the initial formation of ketone derivatives by catalytic carbonylation at the beta-olefinic C-H bonds of alpha,beta-unsaturated imines, followed by the (uncatalyzed) intramolecular nucleophilic attack of the imine nitrogen on the ketonic carbon to generate a tetrahedral intermediate, which then undergoes a 1,2-ethyl migration. The reaction of a cyclic unsaturated imine, derived from the reaction of (1R)-(-)-myrtenal with tert-butylamine, gives a beta-aminocyclopentene derivative, which is formed by an aldol-type condensation of the initially formed ketone, indicating the initial formation of ethyl ketone.     

Energy transfer reaction of cationic porphyrin complexes on the clay surface: effect of sample preparation method

Photochemical energy transfer of non-aggregated cationic porphyrins on an anionic-type clay (Smecton SA) surface was investigated. The efficiency of energy transfer and excited-state quenching in the absence of energy transfer were evaluated at various loading levels of porphyrin on the clay surface and were found to be significantly affected by the loading level. As the latter increased, both energy transfer efficiency and excited-state quenching increased. Judging from the dependency of energy-transfer efficiency on the porphyrin loading level, a partially clustered structure, but without aggregation, of porphyrins on the clay surface is proposed.     

Selective CO2 reduction into formate using Ln-Ta oxynitrides combined with a binuclear Ru(Ⅱ)complex under visible light

Hybrid materials constructed from a visible-light-absorbing semiconductor and a functional metal complex have attracted attention as efficient photocatalysts for CO₂ reduction with high selectivity to a desired product.In this work,defect fluorite-type Ln-Ta oxynitrides LnTaO_xN_y(Ln=Nd,Sm,Gd,Tb,Dy and Ho)were examined as the semiconductor component in a hybrid photocatalyst system combined with known Ag nanoparticle promoter and binuclear ruthenium(Ⅱ)complex(RuRu’).Among the LnTaO_xN_y examined,TbTaO_xN_y gave the highest performance for CO₂ reduction under visible light(k>400 nm),with a Ru Ru0-based turnover number of 18 and high selectivity to formate(>99%).Physicochemical analyses indicated that high crystallinity and more negative conduction band potential of Ln Ta O_xN_ywith the absence of Ln-4 f states in the band gap structure contributed to higher activity of the hybrid photocatalyst.     

Numerical simulation of inductive method for determining spatial distribution of critical current density

The inductive method for measuring the critical current density j_C in a high-temperature superconducting (HTS) thin film has been investigated numerically. In order to simulate the method, a non-axisymmetric numerical code has been developed for analyzing the time evolution of the shielding current density. In the code, the governing equation of the shielding current density is spatially discretized with the finite element method and the resulting first-order ordinary differential system is solved by using the 5th-order Runge–Kutta method with an adaptive step-size control algorithm. By using the code, the threshold current I_T is evaluated for various positions of a coil. The results of computations show that, near a film edge, the accuracy of the estimating formula for j_C is remarkably degraded. Moreover, even the proportional relationship between j_C and I_T will be lost there. Hence, the critical current density near a film edge cannot be estimated by using the inductive method.     

Versatile glycoblotting nanoparticles for high-throughput protein glycomics

We have developed an effective and practical trap-and-release method based on chemoselective ligation of carbohydrates with reactive aminooxyl groups attached to the surface of nanoparticles (referred to as glycoblotting nanoparticles). These glycoblotting nanoparticles were synthesized by UV irradiation of diacetylene-functionalized lipids that contain the aminooxyl group. The glycoblotting nanoparticles captured carbohydrates in aqueous solution under mild conditions and were collected by simple centrifugation. The trapped carbohydrates were effectively released from the nanoparticles under acidic conditions to give pure oligosaccharides. This glycoblotting process reduced the time required for the purification process of carbohydrates to less than 6 h, compared to the several days needed for conventional chromatographic techniques. The oligosaccharides (N-glycan) were released from ovalbumin (glycoprotein) by PNGase F after tryptic digestion. MALDI-TOF mass spectra before purification did not show any significant signals corresponding to N-glycans because these signals were hidden by the large signals of the abundant peptides. However, after purification with the glycoblotting nanoparticles, only signals corresponding to oligosaccharides appeared. We also demonstrated a clear analysis of the oligosaccharides contained in the mice dermis by means of glycoblotting.     

N‐Heterocyclic Carbene Catalyzed Concerted Nucleophilic Aromatic Substitution of Aryl Fluorides Bearing α,β‐Unsaturated Amides

Concerted nucleophilic aromatic substitution (CS_NAr) has emerged as a powerful mechanistic manifold, in which nucleophilic aromatic substitution can proceed in one step without the need to form a Meisenheimer intermediate. However, all of the CS_NAr reactions reported thus far require a stoichiometric strong base or activating reagent, and no catalytic variants have yet been reported. Herein, we report an N‐heterocyclic carbene (NHC)‐catalyzed intramolecular cyclization of acrylamides that contain a 2‐fluorophenyl group on the nitrogen through a CS_NAr reaction. By using this catalytic method, it is possible to synthesize an array of quinolin‐2‐one derivatives, which are common structural motifs in pharmaceuticals and organic materials. DFT calculations unambiguously revealed that this reaction proceeds through the concerted nucleophilic aromatic substitution of aryl fluorides, in which a stereoelectronic σ (C_ipso‐C_β)→ σ*(C_ipso‐F) interaction critically contributes to the stabilization of the transition state for the cyclization.     

Materials Space-Tectonics: Atomic-level Compositional and Spatial Control Methodologies for Synthesis of Future Materials

Reactions occurring at surfaces and interfaces necessitate the creation of well-designed surface and interfacial structures. To achieve a combination of bulk material (i.e., framework) and void spaces, a meticulous process of “nano-architecting” of the available space is necessary. Conventional porous materials such as mesoporous silica, zeolites, and metal–organic frameworks lack advanced cooperative functionalities owing to their largely monotonous pore geometries and limited conductivities. To overcome these limitations and develop functional structures with surface-specific functions, the novel materials space-tectonics methodology has been proposed for future materials synthesis. This review summarizes recent examples of materials synthesis based on designing building blocks (i.e., tectons) and their hybridization, along with practical guidelines for implementing materials syntheses and state-of-the-art examples of practical applications. Lastly, the potential integration of materials space-tectonics with emerging technologies, such as materials informatics, is discussed.     

Modification of Wide‐Band‐Gap Oxide Semiconductors with Cobalt Hydroxide Nanoclusters for Visible‐Light Water Oxidation

Cobalt‐based compounds, such as cobalt(II) hydroxide, are known to be good catalysts for water oxidation. Herein, we report that such cobalt species can also activate wide‐band‐gap semiconductors towards visible‐light water oxidation. Rutile TiO₂ powder, a well‐known wide‐band‐gap semiconductor, was capable of harvesting visible light with wavelengths of up to 850 nm, and thus catalyzed water oxidation to produce molecular oxygen, when decorated with cobalt(II) hydroxide nanoclusters. To the best of our knowledge, this system constitutes the first example that a particulate photocatalytic material that is capable of water oxidation upon excitation by visible light can also operate at such long wavelengths, even when it is based on earth‐abundant elements only.     

Light-harvesting energy transfer and subsequent electron transfer of cationic porphyrin complexes on clay surfaces

A novel energy-transfer system involving nonaggregated cationic porphyrins adsorbed on an anionic-type clay surface and the electron-transfer reaction that occurs after light harvesting are described. In the clay-porphyrin complexes, photochemical energy transfer from excited singlet zinc porphyrins to free-base porphyrins proceeds. The photochemical electron-transfer reaction from an electron donor in solution (hydroquinone) to the adsorbed porphyrin in the excited singlet state was also examined. Because the electron-transfer rate from the hydroquinone to the excited singlet free-base porphyrin is larger than that to the excited singlet zinc porphyrin, we conclude that the energy transfer accelerates the overall electron-transfer reaction.