Calorimetric investigation of water/polyoxyethylene systems

Systems of water and polyoxyethylene with different molecular weights were studied calorimetrically. The enthalpies of melting of the eutectic phases, and the concentrations of bound water and polyoxyethylene were determined, depending on the composition and the POE sample.

---

Zusammenfassung Systeme von Wasser und Polyoxyethylenen unterschiedlichen Molekulargewichts wurden untersucht. Die Schmelzenthalpien der eutektischen Phasen und die Konzentrationen von gebundenem Wasser und Polyoxyethylen wurden bestimmt.

---

— . .

     

Kinetics of nonisothermal crystallization and melting of normal high density and ultra-high molecular weight polyethylene blends

The kinetics of nonisothermal crystallization and melting of blends of ultra-high molecular weight polyethylene (UHMWPE) and polyethylene high density with normal molecular weight (NMWPE) are investigated by means of differential scanning calorimetry (DSC). Mixing the components at a temperature below the flow temperature of UHMWPE (215 °C) results in increased crystallization/melting rates of the individual components in the blends above the corresponding additive values. The morphological observations of the blends, carried out by means of polarization microscopy, show that a strong boundary of both types of structures (UHMWPE non-flowing aggregates and NMWPE spherulite structures) does not exist. The NMWPE spherulites' dimensions decrease on increasing the UHMWPE concentration in the blends, but their number increases. The facilitation of the crystallization/melting of the components in the blends is explained in terms of mutual influence exhibited by the components with respect to each other. It is due to the inner stresses in nonflowing UHMWPE characterized with a lot of entangled tie molecules and to the partial co-crystallization of NMWPE molecules with the flowing part of UHMWPE. At mixing temperatures above 215 °C the melting/crystallization integral kinetic curves have only one linear part in contrast to these of the same blend (11 ratio of components), prepared at 190 °C. The rates of melting/crystallization remain almost constant with the increase of the mixing temperatures.     

One-pot synthesis of 2-(dicyanomethylene)-1,2-dihydropyridine derivatives

The synthesis of 2-(dicyanomethylene)-1,2-dihydropyridine derivatives from the reactions of arylmethylidene derivatives of malononitrile dimers with 1,3-dicarbonyl compounds is described.     

Fiber bragg gratings made with a phase mask and 800-nm femtosecond radiation

High-quality retroreflecting fiber Bragg gratings were written in standard Ge-doped telecom fiber (Corning SMF-28) after a few minutes exposure with pulsed 800-nm, 120-fs laser radiation by use of a deep-etch silica zero-order nulled phase mask optimized for 800 nm. Induced index modulations of 1.9 x 10(-3) were achieved with peak power intensities of 1.2 x 10(13) W/cm2 without any fiber sensitization. The fiber gratings are stable and did not erase after 2 weeks at 300 degrees C. The primary mechanism of induced index change results from a structural modification to the fiber core.     

Highly luminescent complexes [Mo6X8(n-C3F7COO)6]2- (X=Br, I)

New complexes (Bu(4)N)(2)[Mo(6)X(8)(n-C(3)F(7)COO)(6)] (X = Br, I) display extraordinarily bright long-lived red phosphorescence both in solution and solid phases, with the highest emission quantum yields and the longest emission lifetimes among hexanuclear metal cluster complexes of Mo, W and Re, hitherto reported.     

IR-Spektren von deuteriertem Poly(methylmethacrylat), (-CD2C(CH3)COOCH3)n-

Ohne Zusammenfassung     

Bragg grating writing through the polyimide coating of high NA optical fibres with femtosecond IR radiation

Bragg gratings are written with ultrafast 800 nm radiation and a phase mask through the polyimide polymer coatings of commercially available high NA fibres that are both unloaded and loaded with high pressure hydrogen gas. For polyimide coated fibres with very high germanium core concentrations, index modulations greater than 1 × 10⁻⁴ are induced. Stable core index modulations 60% of their original value were present after 115 h at 500 °C.     

Oriented action of some solid substrates to liquid crystal layer

The orienting action of three types of layers on liquid crystal is investigated. Homogeneous orientation of the liquid crystal layer is obtained under the action of a transparent conductive SnO₂ film and carbon film. Such an orientation is achieved with gelatin films as well. Homeotropic orientation of the liquid crystal can be also obtained by exposing the latter to ion bombardment with Ar ions.     

Pecularities of the thermomechanical behaviour of ultra-high molecular weight linear polyethylene and its blends with linear polyethylene of normal molecular weight

Ultra-high molecular weight polyethylene UHMWPE (M _w=4 · 10⁶,I _s=O g/ 10 min), high density polyethylene of normal molecular weight NMWPE (I _s= 4.8 g/10 min) and their blends have been investigated by means of thermomechanical loading in constant and impulse regime. It has been established that after melting, NMWPE passes to a viscous-liquid state. After melting at 138 °C UHMWPE passes to a high-elastic state. The transition of UHMWPE to a viscous-liquid state takes place at temperatures higher than 180 °C and is accompanied by a high-elastic reversible deformation. The blends of UHMWPE with 10 and 20 mass % of NMWPE show a plateau on the thermomechanical curves, corresponding to a high-elastic state, in a shorter temperature range where the deformation is greater. The blends containing the higher percent of NMWPE show thermomechanical curves lacking such a plateau. All blends are characterized by a singular thermomechanically defined temperature of melting, which increases with increase of UHMWPE content. The existence of the high-elastic state in the curves of UHMWPE and its blends containing NMWPE less than 30 mass % above their melting temperatures is explained by the high degree of physical crosslinking of UHMWPE.