Influence of pitching on performance of VAWTs

Self- starting is the major obstacle to be overcome for successful design of a vertical axis wind turbine (VAWT). In the past has been suggested that pitching the turbine blades such that pitch angle is not 90 degrees allows for self-starting. To understand the physics surrounding pitching, an analysis is carried out for a common airfoil profile, NACA 0012. The vortex model is used to predict aerodynamic performance of VAWT with pitched blades at various angles. As a result of the analysis carried out for the airfoil at various pitch angles, it was shown that the “dead band” phenomenon could be overcome, but only slightly. At the same time, to overcome the “dead band” with a level on confidence, torques in the tip speed ratio (TSR ) range of 0.75 to 2.75 must be increased to values further above zero. The paper aimed at giving an insight into the small wind turbine starting behavior and its influence parameters. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A numerical investigation on the dynamic stall of a vertical axis wind turbine

In the last years, for home user, the wind turbine with vertical axis (VAWT) began to be more attractive due benefits in exploitation. In terms of aerodynamics, when the wind speed approaches the speed of operation (low value of tip speed ratio -TSR) the blade airfoil exceeds the critical angle of incidence for static conditions. Angle of incidence varies quickly across blade and the blade works in dynamic stall condition. The goal of the present work is to investigate the two-dimensional dynamic stall phenomenon around the NACA 0012 airfoil at relatively low Reynolds. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Unsteady Flow and its Influence to Aerodynamic and Aeroacoustic of VAWT's

A study is reported of the influence of unsteady flow on the aerodynamics and aeroacoustics of vertical axis wind turbines by numerical simulation. The combination of aerodynamic predictions with a discrete vortex method and aeroacoustic predictions based on Ffowcs Williams-Hawkings equation is used to achieve this goal. The numerical results show that unsteady flow of the turbine has a significant influence on the turbine aerodynamics and can lead to a decrease in generated noise as compared to the conventional horizontal axis wind turbine at the similar aerodynamic performance. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Magnetic properties of core-shell catalyst nanoparticles for carbon nanotube growth

Two types of core-shell nanoparticles have been prepared by laser pyrolysis using Fe(CO)₅ and C₂H₂ or [(CH₃)₃Si]₂O as precursors and C₂H₄ as sensitizer. The first type (about 4 nm diameter) - produced by the decomposition of Fe(CO)₅ in the presence of C₂H₄ and C₂H₂ - consists of Fe cores protected by graphenic layers. The second type (mean particle size of about 14 nm) consists also of Fe cores, yet covered by few nm thick γ-Fe₂O₃/porous polycarbosiloxane shells resulted from the [(CH₃)₃Si]₂O decomposition and superficial oxidation after air exposure. The hysteresis loops suggest a room temperature superparamagnetic behavior of the Fe-C nanopowder and a weak ferromagnetic one for larger particles in the Fe-Fe₂O₃-polymer sample. Both types of nanoparticles were finally used as a catalyst for the carbon nanotube growth by seeding Si(100) substrates via drop-casting method. CNTs were grown by Hot-Filament Direct.Current PE CVD technique from C₂H₂ and H₂ at 980 K. It is suggested that the increased density and orientation degree observed for the multiwall nanotubes grown from Fe-Fe₂O₃-polymer nanoparticles could be due to their magnetic behavior and surface composition.     

The synthesis of free-standing films of polymer/nanocarbon composites using the carbon nanopowder's buoyancy

In this work we report the synthesis of free-standing films of polymer/nanocarbon composites. The method consists in forming a thin film of carbon nanoparticles onto the water's surface. Through the free infiltration of the polymer between the nanoparticles which form the film, after the polymer is cured, we obtain free-standing films of polymer/nanocarbon composites. The composite films are homogeneous; they have 5 wt.% carbon nanoparticles within the polymer matrix and are a few micrometers in thickness.     

Numerical analyis of turbulent flow in a Coanda ejector

The task of this study is to investigate the influence of various geometric parameters and pressure ratios on the Coanda ejector performance. For numerically investigations we use an implicit formulation of the compressible Reynolds-average Navier-Stokes equations (RANS) for axisymmetric flow with a shear stress transport k − ω (SST model) turbulence model. The numerically results was obtained for a total pressure range 1-5 Bars, imposed at the reservoir inlet. The effect of various factors, such as, the pressure ratio, primary nozzle and ejector configurations on the system performance has been evaluated based on defined performance parameters. The numerical results have been compared with theoretical and experimental results for a given Coanda ejector configuration. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Carbon nanotubes growth from C2H2 and C2H4/NH3 by catalytic LCVD on supported iron–carbon nanocomposites

We report about the synthesis of carbon nanotubes by catalytic LCVD (C-LCVD), using a CW CO₂ laser and alternatively, C₂H₂/C₂H₄/NH₃ and C₂H₂/C₂H₄-containing gas mixtures. Different core–shell Fe–C nanocomposites (as synthesized and toluene extracted) were used employed as catalysts. The nanotubes grown from Fe–C residue demonstrate the lowest mean diameters. Prevalent curled and coiled morphologies are obtained for the CNTs grown in the presence of ammonia.     

Development of systems for the laser synthesis of nanoparticles starting from liquid precursors

The laser synthesis of nanoparticles starting from liquid precursors is particularly suitable as synthesis technique for obtaining nanoparticles. In the present work the laser pyrolysis is performed in a novel setup where the liquid precursor is brought with the aid of an original evaporator system to temperatures in excess of the boiling point and is finally fed into the reactor under the form of heated vapors.The process occurs in the gas phase and ensures the avoidance of the condensation. The temperature control system allows for the maintaining of the overall system temperature below the decomposition temperature and above the boiling. Temperatures up to 500 °C are assured for the mixed precursors. The control of the amount of the active substances is performed upstream, in the liquid phase. The set-up is able to offer safety conditions at the synthesis of substances with high toxicity. This experimental set-up was proposed in order to synthesize TiO₂ nanoparticles from TTIP because its boiling temperature is relatively high (239 °C grades). Different analytical techniques such as EDX, TEM, XRD and HRTEM were used in order to evaluate the structural characteristics of the produced nanopowders.     

Unsteady convective diffusion of a solute in a Hagen-Poiseuille flow through a tube with permeable wall

Influence of Interphase Mass Transfer (IMT) on the unsteady convective diffusion in a fluid flow through a tube surrounded by a porous medium is examined against the background of no IMT. The three coefficients namely exchange coefficient, convection coefficient, and dispersion coefficient are evaluated asymptotically at large-time. The exchange coefficient exists due to IMT. All-time analysis is made analytically when there is no IMT. The mean concentration distribution is measured at a point inside and outside the slug. The peak of mean concentration is higher than that of pure convection and it is further enhanced with increase of porous parameter. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Iron-carbon nanoparticles prepared by CO2 laser pyrolysis of toluene and iron pentacarbonyl

CO₂ laser induced co-pyrolysis of toluene and iron pentacarbonyl in the presence of an ethylene sensitizer was used to produce iron-carbon nanostructures containing cementite Fe₃C as the major component. The passivated Fe-C nanocomposites were characterized by several complementary analytical methods. Good agreement is found between the results of X-ray diffraction, Mössbauer spectroscopy and high-resolution transmission electron microscopy techniques which show that besides cementite, iron, and iron oxides, traces of other carbides are also present. Specific morphological aspects of the nanograins encased in a mostly disordered and quasi-amorphous carbon matrix are revealed. The simultaneous presence of rather small crystallites (mean diameter between 3–6 nm), identified as possible Fe₃C/α-Fe and iron oxide (maghemite/magnetite) phases and of single-phase larger crystallites (10–13 nm mean diameter), identified as Fe₃C is illustrated. Raman spectroscopy seems to confirm maghemite as the iron oxide phase present in the iron-carbon nanopowders. The level of oxidation mainly induced by powder passivation is roughly estimated by FTIR spectroscopy and leads to iron oxide contents between 11–17 wt.?%. The catalytic role of iron nanoparticles in the pyrolyzed system is addressed in connection with nanocarbon samples obtained in the absence of an iron donor.