Measurement of intense microwave field patterns using a neon glow indicator lamp

A novel method using small neon glow lamps with electrodes is developed for measuring intense microwave field patterns. When the lamp axis coincide with the electric field direction, the lamp discharge starts at the feeblest microwave electric field strength. Therefore, the lamp axis shows the field direction and the discharge starting indicates the field strength. The field strength for starting the microwave discharge is less than the strength for AC discharge, because of its low loss discharge mechanism. In the experiments using a microwave oven, it has been demonstrated again comparing with the simulated results that the method is able to use for measuring the intense electric field strength and direction.     

A perfect one-factorization ofK 36

In this paper, a perfect one-factorization ofK ₃₆ is given, which is factor-1-rotational.     

Preparation of Polymer Particles Coated with Hydroxyapatite

Polymer particles coated with hydroxyapatite were prepared by treating Pd0 immobilized polystyrene-co-acrylic acid particles in aqueous CaCl2 and NaH2PO2 solutions. Hydroxyapatite coating took place at neutral to alkaline pH conditions, and the homogeneous growth of the hydroxyapatite layer on the surface of polymer particles was observed at relatively low temperature (30-50 degrees C). The thickness of the hydroxyapatite layer increased with reaction time. Copyright 1999 Academic Press.     

Distribution of polymer deposition in plasma polymerization. III. Effect of discharge power

Distribution of polymer deposition in an inductively coupled rf discharge system is studied as a function of level of discharge power with acetylene and styrene as monomers. When a fixed flow rate is used, the discharge power has a relatively small effect on the pattern of distribution of polymer deposition as long as values of W/FM, where W is discharge wattage, F is flow rate, and M is molecular weight of monomer, are maintained above a critical level to maintain full glow in the reaction tube. It has been shown that plasma polymerization of two monomers which have different molecular weights can be compared in a fair manner by selecting conditions to yield similar value of W/FM.     

Plasma polymerization of tetrafluoroethylene. III. Reproducibility and effects of substrate and reactor materials

Plasma polylmerization occurs in plasmas surrounded by surfaces and polymer formation is one of the complicated interactions that take place between active species and molecules which constitute surfaces and gas phases. Effects of reactor wall, substrate materials, flow rate, and discharge power on polymer formation, and properties of polymer deposits were investigated by ESCA, IR (infrared) spectroscopy, and the measurement of system pressure. The effect of surface is important at the initial stage of plasma polymerization which can be easily detected by the system pressure change; however, integrated properties such as IR spectroscopy and the deposition rate show the effect in a less pronounced manner. ESCA, which reflects the properties of surface (approximately 20 A? in depth), showed the effect of surface in an even less sensitive manner. The amount and properties (including the effects of surfaces) are dependent on plasma polymerization parameter W/FM(W, wattage; F, volume flow rate; and M, molecualar weight of monomer) and the location of deposition within a reactor. IR and ESCA data clearly showed the dependence of polymer properties on W/FM; i.e., increase of W and decrease of M to be equivalent. When all these factors were kept under control, the reproducibility of plasma polymerization was found to be excellent.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry     

A novel method for atomic absorption spectroscopy based on the analyte-Zeeman effect

A new type of atomic absorption spectrometry using the Zeeman effect of sample materials is proposed. A magnetic field was applied to the sample vapor in the direction perpendicular to the propagation of light emitted from an atomic spectral source. Absorption of radiation polarized perpendicular and parallel to the magnetic field was observed alternatively. The absorption difference was proportional to the true atomic absorption, and was not interfered with by any other molecular absorption and light scattering, i.e., background absorption. The background absorption could be monitored at exactly the same wavelength as an atomic absorption line. Suitable magnetic field strength was found for each line of the various elements.     

Novel phenoxyalkylamine derivatives. VII. Synthesis and pharmacological activities of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives.

To find a novel alpha-blocker with high alpha-blocking selectivity against dopamine D2-receptor affinity, we performed structural modification of the alkylene chains and the substituents on two benzene rings of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives. The modification of the alkylene chain between the amino moiety in the center of the molecule and the benzene ring (ring A) was found to be the most significant. 5-[2-[[2-(5-Fluoro-2-methoxyphenoxy)ethyl]amino]propyl]-2- methoxybenzenesulfonamide (II-4), which possesses 1-methylethyl as the alkylene chain, exhibited high alpha-blocking selectivity as well as potent alpha-blocking activity.     

Streptonigrin and lavendamycin partial structures. Preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid: A probe for the minimum,potent pharmacophore of the naturally occurring antitumor-antibiotics

The preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid (4) constituting a potential minimum, potent pharmacophore of streptonigrin (1) and lavendamycin (2) , two structurally-related naturally-occurring antitumor-antibiotic, is detailed. In contrast to observations associated with streptonigrin and lavendamycin in which the C-6′ acid potentiates the antitumor, antimicrobial, and cytotoxic activity of the naturally-occurring, substituted 7-aminoquinoline-5,8-quinone AB ring systems, the C-6′ carboxylic acid of 4 diminishes the observed antimicrobial and cytotoxic properties of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone.