One-pot synthesis of an ionic half-sandwich complex of neodymium. Application to isoprene polymerisation catalysis

The reaction of one equivalent of Nd(BH₄)₃(THF)₃ with an half equivalent of dialkylmagnesium in the presence of a stoichiometric amount of pentamethylcyclopentadiene cleanly affords a new kind of half-sandwich of neodymium that is stable toward comproportionation. This strategy can be advantageously applied to generate in situ catalysts allowing the controlled polymerisation of isoprene.     

Gel-phase 19F NMR spectral quality for resins commonly used in solid-phase organic synthesis; a study of peptide solid-phase glycosylations

The spectroscopic properties for seven different commercial resins used in solid-phase synthesis were investigated with (19)F NMR spectroscopy. A fluorine-labeled dipeptide was synthesized on each resin, and the resolution of the (19)F resonances in CDCl(3), DMSO-d(6), benzene-d(6) and CD(3)OD were measured with a conventional NMR spectrometer, i.e. without using magic angle spinning. In general, resins containing poly(ethylene glycol) chains (ArgoGel, TentaGel and PEGA) were found to be favorable for the (19)F NMR spectral quality. Three serine containing tri-, penta-, and heptapeptides were then prepared on an ArgoGel resin functionalized with a fluorine-labeled linker. The resin bound peptides were glycosylated utilizing a thiogalactoside glycosyl donor carrying fluorine-labeled protective groups. Monitoring of the glycosylations with gel-phase (19)F NMR spectroscopy allowed each glycopeptide to be formed in similar 80% yield, using a minimal amount of glycosyl donor (3 x 2 equivalents). In addition, it was found that the glycosylation yields were independent of peptide length.     

A fluorinated selenide linker for solid-phase synthesis of n-pentenyl glycosides

[reaction: see text] A fluorine-labeled selenide linker for installing terminal isolated olefins has been synthesized in high overall yield. The resin-bound linker could be glycosylated both with glycosyl trichloroacetimidates and glycosyl fluorides. The linker did not decompose after oxidation with tBuOOH but underwent beta-elimination when it was subjected to heat. This allowed the released n-pentenyl glycoside 15 to be isolated in excellent yield and purity after filtration.     

An unexpected P-cluster like intermediate en route to the nitrogenase FeMo-co

The nitrogenase MoFe protein contains two different FeS centers, the P-cluster and the iron–molybdenum cofactor (FeMo-co). The former is a [Fe₈S₇] center responsible for conveying electrons to the latter, a [MoFe₇S₉C-(R)-homocitrate] species, where N₂ reduction takes place. NifB is arguably the key enzyme in FeMo-co assembly as it catalyzes the fusion of two [Fe₄S₄] clusters and the insertion of carbide and sulfide ions to build NifB-co, a [Fe₈S₉C] precursor to FeMo-co. Recently, two crystal structures of NifB proteins were reported, one containing two out of three [Fe₄S₄] clusters coordinated by the protein which is likely to correspond to an early stage of the reaction mechanism. The other one was fully complemented with the three [Fe₄S₄] clusters (RS, K1 and K2), but was obtained at lower resolution and a satisfactory model was not obtained. Here we report improved processing of this crystallographic data. At odds with what was previously reported, this structure contains a unique [Fe₈S₈] cluster, likely to be a NifB-co precursor resulting from the fusion of K1- and K2-clusters. Strikingly, this new [Fe₈S₈] cluster has both a structure and coordination sphere geometry reminiscent of the fully reduced P-cluster (P^N-state) with an additional μ²-bridging sulfide ion pointing toward the RS cluster. Comparison of available NifB structures further unveils the plasticity of this protein and suggests how ligand reorganization would accommodate cluster loading and fusion in the time-course of NifB-co synthesis.

The K-cluster of NifB as a key intermediate in the synthesis of the nitrogenase active site supports [Fe₄S₄] cluster fusion occurs before carbide and sulfide insertion and displays ligand spatial arrangement reminiscent to that of the P-cluster.     

Trichloroethylene Combustion in a Submerged Thermal Plasma: Results and Chemical Kinetics Model

This work deals with incineration of organic liquid wastes using an oxygen thermal plasma jet, submerged in water. The results presented here concern incineration of trichloroethylene (TCE). During a trial run, the CO₂ and CO content in the exhaust gas is continuously measured; samples taken periodically from the solution are analyzed by appropriate methods: total organic carbon and chlorine content are measured. Process efficiency during tests with a few L/h of TCE is given by the mineralization rate. The trapping rate of chlorine as HCl is near 100 %. The TCE destruction and removal efficiency, measured by MS/GC, is better than 99.9999 %. A simplified kinetic model of gas quenching was constructed from a single-phase plug-flow reactor model taking into account 14 species and 34 reactions. It satisfies the requirements of heat balance and major components analysis, and reveals the major role of the OH radical on the concentrations of CO as well as HCl and/or Cl₂ in the off-gas stream.     

Multiscale Approach to the Study of the Electronic Properties of Two Thiophene Curcuminoid Molecules

We studied the electronic and conductance properties of two thiophene–curcuminoid molecules, 2‐thphCCM ( 1 ) and 3‐thphCCM ( 2 ), in which the only structural difference is the position of the sulfur atoms in the thiophene terminal groups. We used electrochemical techniques as well as UV/Vis absorption studies to obtain the values of the HOMO–LUMO band gap energies, showing that molecule 1 has lower values than 2 . Theoretical calculations show the same trend. Self‐assembled monolayers (SAMs) of these molecules were studied by using electrochemistry, showing that the interaction with gold reduces drastically the HOMO–LUMO gap in both molecules to almost the same value. Single‐molecule conductance measurements show that molecule 2 has two different conductance values, whereas molecule 1 exhibits only one. Based on theoretical calculations, we conclude that the lowest conductance value, similar in both molecules, corresponds to a van der Waals interaction between the thiophene ring and the electrodes. The one order of magnitude higher conductance value for molecule 2 corresponds to a coordinate (dative covalent) interaction between the sulfur atoms and the gold electrodes.     

Viscoelastic shear properties of in vivo breast lesions measured by MR elastography

Elastography is a technique to assess the viscoelastic properties of tissue by measuring an acoustic wave propagating though the object. Here, the technique is applied in the course of standard MR mammography to 15 patients with different pathologies (six breast cancer cases, six fibroadenoma cases and three mastopathy cases). Low-frequency mechanical waves are coupled longitudinally into the tissue in order to obtain sufficient wave amplitude throughout the entire breast. This leads to the presence of a substantial fraction of compressional waves, which contribute to the total displacement field. It is shown theoretically that the correct evaluation of these contributions from the compressional wave is rather difficult due to the almost incompressible nature of tissue. To overcome this problem, it is proposed to apply the curl-operator to the measured displacement field in order to completely remove contributions from the compressional wave. Results from simulations and a breast phantom demonstrate the feasibility of the technique. The in vivo results show a good separation between breast cancer and benign fibroadenoma utilizing the shear modulus. Breast cancer appears on average 2.2 (P<.001) times stiffer. All breast cancer cases showed a good delineation to the surrounding breast tissue with an average elevation of a factor of 3.3 (P< 1.4 x 10(-6)). The results as obtained for the shear viscosity do not indicate to be useful for separating benign from malignant lesions.     

Rheology and structure formation in diluted mixed particle-surfactant systems

In the present work, we focus on the bulk rheology of mixtures consisting of surfactant modified silica nanoparticles in water. Depending on the ratio of surfactant and nanoparticle concentrations, significant modifications in the measured rheology are evidenced. A domain where the dispersions behave like viscoelastic media is observed. Outside this domain, the dispersions exhibit viscous properties. The changes in the bulk rheology characteristics are discussed in terms of interaction effects between the surfactant and the particles. The results obtained are seen in the context of diluted emulsions' properties and characteristics.     

A versatile route to 3-(pyrimidin-4-yl)-imidazo[1,2-a]pyridines and 3-(pyrimidin-4-yl)-pyrazolo[1,5-a]pyridines

A two-step synthesis of 3-(2-chloropyrimidin-4-yl)imidazo[1,2-a]pyridines is presented. The late stage elaboration of the imidazopyridine through a cyclocondensation allows a rapid access to a variety of substitution patterns. The intermediate enol ethers were obtained from inexpensive reagents in a ligand-free Heck coupling. This methodology has been extended to the formation of pyrazolo[1,5-a]pyridines via a formal 1,3-dipolar cycloaddition.     

γ-Lactam-containing peptidomimetics

Protected diaminoalcohols obtained through allyl addition to α-amino acid-derived imines and subsequent hydroboration were used for the preparation of pyrrolidinones and pyrrolidines. Pyrrolidinones were synthesized with moderate yields by oxidation of the hydroxy function with tetrapropylammonium perruthenate/N-methylmorpholine-N-oxide and concomitant cyclization while pyrrolidines were synthesized in good yields by tosylation of the hydroxy group and subsequent intramolecular nucleophilic substitution. Thus accessible substrates were transferred into peptidomimetics by attachment of amino acid moieties at both termini using conventional peptide coupling strategies. Molecular mechanics optimizations suggest that these substrates preferentially adopt a turn conformation.