Electrical conductance of solutions of lithium nitrate in 1,3-diaminopropane

Electrical conductances and densities of the LiNO₃-1,3-diaminopropane system have been measured as a function of composition and temperature. The results suggest that the solvent molecules may act as bridges between Li⁺ ions at higher concentration of LiNO₃.     

Phenotyping of erythrocyte acid phosphatase and esterase D by high field strength isoelectric focusing on cellulose acetate membrane

Phenotyping of erythrocyte acid phosphatase (EAP) and esterase D (ESD) by cellulose acetate membrane isoelectric focusing (CAM-IEF) under a nonequilibrium condition is described. In an attempt to improve the method of CAM-IEF, we shortened the electrode distance to provide a higher field strength at a given (low) voltage. Various carrier ampholytes for EAP typing and various chemical separators for ESD typing were also tested. Good separations were obtained after 30 min IEF for EAP typing and 25 min for ESD typing. When applied to blood stains and stored for various periods at room temperature, the stains up to 8 months old could still be phenotyped for EAP and those up to 4 weeks old for ESD. CAM-IEF is suitable for routine forensic work of EAP and ESD phenotyping.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.     

Snthetic Studies on Carotane and Dolastane Type Terpenes: A New Entry to the Total Synthesis of (±)-Daucene Via Intramolecular [2 + 2] Photocycloaddition

An efficient synthesis of new hydroazulene derivatives, 13 and 14, potential intermediates for the syntheses of the the title terpenes, via intramolecular [2 + 2] photocycloaddition is described in the context of the total synthesis of (±)-daucene.     

Hot Branching Dynamics in a Light‐Harvesting Iron Carbene Complex Revealed by Ultrafast X‐ray Emission Spectroscopy

Iron N‐heterocyclic carbene (NHC) complexes have received a great deal of attention recently because of their growing potential as light sensitizers or photocatalysts. We present a sub‐ps X‐ray spectroscopy study of an Fe^IINHC complex that identifies and quantifies the states involved in the deactivation cascade after light absorption. Excited molecules relax back to the ground state along two pathways: After population of a hot ³MLCT state, from the initially excited ¹MLCT state, 30 % of the molecules undergo ultrafast (150 fs) relaxation to the ³MC state, in competition with vibrational relaxation and cooling to the relaxed ³MLCT state. The relaxed ³MLCT state then decays much more slowly (7.6 ps) to the ³MC state. The ³MC state is rapidly (2.2 ps) deactivated to the ground state. The ⁵MC state is not involved in the deactivation pathway. The ultrafast partial deactivation of the ³MLCT state constitutes a loss channel from the point of view of photochemical efficiency and highlights the necessity to screen transition‐metal complexes for similar ultrafast decays to optimize photochemical performance.     

Estimation of diffusion and permeability coefficients of CO2 in polymeric membranes by FTIR method

Infrared spectra of CO₂ sorbed in rubbery and glassy polymeric membranes were measured to examine the relationships between the spectroscopic data and the physical properties of the membranes. The two peaks observed in the spectra of CO₂ were attributed to the R branch and P branch of CO₂ sorbed in the membranes based on the consideration that both peaks were observed at a temperature above the glass transition temperature of the membranes. Apparent diffusion coefficients of CO₂ in the membranes were measured from the desorption kinetics of CO₂ detected by FTIR spectroscopy. The solubility coefficients of CO₂ were also estimated from absorbance spectra of CO₂ sorbed in the membranes using Lambert-Beer's rule. The permeability, solubility, and diffusion coefficients estimated by the FTIR method were found to correlate well with the coefficients obtained by conventional methods such as vacuum-pressure or sorption isotherm methods. © 1996 John Wiley & Sons, Inc.     

Fundamental imaging properties of transillumination laser computed tomography based on coherent detection imaging method.

The coherent detection imaging (CDI) method uses the optical heterodyne detection technique. CW and single frequency lasers having long coherence lengths are used to exploit the maximum advantages of heterodyne detection, such as high directionality, selectivity and sensitivity. The CDI method based on optical heterodyne detection enables selective filtering of the directional coherence-retaining emergent photons, which leads to image reconstruction from projections, similar to X-ray computed tomography (CT). So far we have demonstrated the advantages and capabilities of the measurement technique for transillumination optical computed tomography in biomedicine. Here, we investigate the fundamental imaging properties of CDI method, such as its high directionality and quantitativeness, with preliminary physical phantom experiments. The results show that the CDI method satisfies the requirements for CT reconstruction under the first order approximation, and enables quantitative measurements in the sense that the relationship between estimated and actual concentration retains a satisfactory linearity.     

In situ monitoring of the H concentration change near an electrode surface through electrolysis using slab optical waveguide pH sensor

The H⁺ concentration change was monitored near an electrode surface through an electrolysis using a slab optical waveguide technique. Indium tin oxide transparent electrode modified by porous insulating polymer to which methyl red was covalently immobilized was used as a guiding layer, and the absorbance change of the polymer film was monitored. H⁺ generation at the vicinity of the electrode through the oxidation of ascorbic acid could be monitored by this technique.     

Wavy mode of the streaked flow around an oscillating cylinder in a stratified fluid at rest

The structures of the flow induced by a vertical circular cylinder performing transverse oscillations in a linearly stratified fluid at rest are investigated. The density gradient inhibits the onset of the three-dimensional instability. The instability appears as regularly spaced streaked flows along the cylinder axis. Each streaked flow follows a wavy path in the horizontal plane in a certain range of amplitude and frequency of the oscillations.