Entanglement of n-heptane and iso-butanol chemistries in flames fueled by their mixtures

This paper concerns itself with the entanglement of the high-temperature oxidation chemistry of n-heptane and iso-butanol in flames fueled by their mixtures. While in many cases the chemistries of the individual fuel components do not interact in mixture flames, in this work, we revealed interactions between the individual species pools originating from n-heptane and iso-butanol oxidation. In a coordinated experimental and modeling effort, chemical structures of three low-pressure premixed flames fueled by different blends of n-heptane and iso-butanol were determined using flame-sampling molecular-beam mass spectrometry with synchrotron-based single-photon ionization and chemical kinetic modeling. The chemical kinetic model, which is based on the reaction set that was used previously [Braun-Unkhoff et al., Proc. Combust. Inst., 2017, 36, 1311–1319], was now extended by an n-heptane sub-mechanism. The overall good performance of the model allows for an extraction of chemically relevant information that highlights the entanglement between the individual fuel-specific species pools. For example, it was shown that methyl radicals, in part from iso-butanol oxidation (i.e., from the decomposition of α-iso-butanol radicals) can participate in n-heptane consumption processes through H-abstraction reactions. Further interactions are related to the formation of the methylallyl radical and aromatics formation. The relevance of such interactions is also discussed regarding the formation of oxygenated byproducts.     

Magnetic studies on mass-selected iron particles

We have investigated the magnetic properties of mass-selected iron clusters using the Magneto-Optical Kerr effect (MOKE) in longitudinal geometry. For the production of these clusters, a newly developed continuous arc cluster ion source (ACIS) was applied. The source is based on cathodic arc erosion in inert gas environment and subsequent expansion into high vacuum. Its intensity and stability allows mass selection within a wide size range. The source efficiency is demonstrated in deposition experiments and transmission electron microscopy. For mass-selected iron particles deposited into a silver matrix we could observe a change in the magnetic behaviour from ferromagnetism to superparamagnetism around a size of 10 nm at room temperature. Received 1st December 2000     

A novel linear transformation model for the analysis and optimisation of chemical kinetics

In this study, a novel model for the analysis and optimisation of numerical and experimental chemical kinetics is developed. Concentration–time profiles of non-diffusive chemical kinetic processes and flame speed profiles of fuel–oxidiser mixtures can be described by certain characteristic points, so that relations between the coordinates of these points and the input parameters of chemical kinetic models become almost linear. This linear transformation model simplifies the analysis of chemical kinetic models, hence creating a robust global sensitivity analysis and allowing quick optimisation and reduction of these models. Firstly, in this study the model is extensively validated by the optimisation of a syngas combustion model with a large data set of imitated ignition experiments. The optimisation with the linear transformation model is quick and accurate, revealing the potential for decreasing the numerical costs of the optimisation process by at least one order of magnitude compared to established methods. Additionally, the optimisation on this data set demonstrates the capability of predicting reaction rate coefficients more accurately than by currently known confidence intervals. In a first application, methane combustion models are optimised with a small experimental set consisting of OH(A) and CH(A) concentration profiles from shock tube ignition experiments, species profiles from flow reactor experiments and laminar flame speeds. With the optimised models, especially the predictability for the flame speeds of mixtures of hydrogen, carbon monoxide and methane can be increased compared to established models. With the analysis of the optimised models, new information on the low pressure reaction coefficient of the fall-off reaction H+CH₃(+M)?CH₄(+M) is determined. In addition, the optimised combustion model is quickly and efficiently reduced to validate a new rapid reduction scheme for chemical kinetic models.     

Synthesis of 1,3,5-tricarbonyl derivatives by condensation of 1,3-bis(silyl enol ethers) with acid chlorides

A variety of 1,3,5-tricarbonyl derivatives were prepared by reaction of 1,3-bis(silyl enol ethers) with acid chlorides under mild conditions. This includes reactions of both aromatic and aliphatic acid chlorides and bis(acid chlorides). The yields vary depending on the type of acid chloride employed.     

An experimental and kinetic modeling study on nitric oxide formation in premixed C3 alcohols flames

This study provides new quantitative NO concentrations measurements in n-propanol + air and i-propanol + air flames together with a new combustion kinetic model. The heat flux method was employed to stabilize propyl alcohols flames and the initial gas conditions were set to 323 K, 1 atm, and Φ=0.7–1.4. Saturated laser-induced fluorescence was employed to measure NO concentration in the post-combustion region. The presented and literature models, namely the POLIMI and Bohon et al. (2018) kinetic mechanisms, were assessed against new experimental data. Experimental results showed a higher NO formation in the thermal zone for n-propanol flames, whereas i-propanol flames indicate a higher amount of NO formed at fuel-rich conditions. Overall among the tested models, the present mechanism exhibited the best agreement in emulating NO experimental profiles; conversely, numerical simulations from the POLIMI model showed significant inconsistencies at fuel-rich conditions and the Bohon et al. (2018) model was unable to reproduce the measured data, notably underpredicting experimental values at all investigated conditions. However, the present model manifested some uncertainties in reproducing NO formation in the prompt region; therefore, in connection with this important aspect, the new experimental data obtained in this work will provide a valid support to further develop more reliable kinetic models.     

Nachweis von Blut

Ohne Zusammenfassung     

Syntheses of Acyclo‐C‐nucleoside Analogs from 2,3:4,5‐Di‐O‐isopropylidene‐D‐xylose

Treatment of 1,2‐dideoxy‐4,5:6,7‐di‐O‐isopropylidene‐D‐xylo‐hept‐1‐yn‐3‐uloses 4a,b with hydrazine hydrate and amidines yielded the 3‐(1,2:3,4‐di‐O‐isopropylidene‐D‐xylo‐1,2,3,4‐tetrahydroxy‐butyl)‐5‐phenyl‐1H(2H)‐pyrazole 5 and the substituted 4‐(1,2:3,4‐di‐O‐isopropylidene‐D‐xylo‐1,2,3,4‐tetrahydroxy‐butyl)pyrimidines 7a–f, respectively. Reaction of 4a,b with 2‐amino‐benzimidazol afforded the 2‐(1,2:3,4‐di‐O‐isopropylidene‐D‐xylo‐1,2,3,4‐tetrahydroxy‐butyl)benzo[4,5]imidazo[1,2‐a]pyrimidines 9a,b. Compound 4a and 5‐amino‐pyrazole‐4‐carbonic acid derivatives yielded the 5‐(1,2:3,4‐di‐O‐isopropylidene‐D‐xylo‐1,2,3,4‐tetrahydroxy‐butyl)pyrazolo[1,5‐a]pyrimidines 11a–d. Deprotection of pyrazole 5, pyrimidine 7a, and pyrazolo[1,5‐a]pyrimidine 11b yielded the acyclo‐C‐nucleosides 6, 8, and 12, respectively.